mbox series

[0/5] Add support for PM8950/PMI8950/PM8004 regulators

Message ID 20190921095043.62593-1-kholk11@gmail.com (mailing list archive)
Headers show
Series Add support for PM8950/PMI8950/PM8004 regulators | expand

Message

AngeloGioacchino Del Regno Sept. 21, 2019, 9:50 a.m. UTC 
From: "Angelo G. Del Regno" <kholk11@gmail.com>

In this patch series, I'm adding support for the PM8950, PMI8950
and PM8004 regulators (smd/spmi).
The PM(I)8950 regulators are required for multiple SoCs, like
MSM8956, MSM8976, MSM8953 (and maybe others), since they all use
the same PM/PMI combo in their own variants.
The personal aim is to upstream MSM8956 as much as possible.

This code has been tested on two Sony phones featuring the Qualcomm
MSM8956 SoC, with PM/PMI8950 and PM8004.

Angelo G. Del Regno (5):
  qcom: spmi-regulator: Add support for ULT LV_P50 and ULT P300
  regulator: qcom_spmi: Add PM8950 SPMI regulator
  regulator: qcom_smd: Add PM8950 regulators
  mfd: qcom-spmi-pmic: Add support for PM/PMI8950
  regulator: qcom_spmi: Add support for PM8004 regulators

 .../bindings/mfd/qcom,spmi-pmic.txt           |  2 +
 .../regulator/qcom,smd-rpm-regulator.txt      | 21 +++++
 .../regulator/qcom,spmi-regulator.txt         | 25 +++++
 drivers/mfd/qcom-spmi-pmic.c                  |  4 +
 drivers/regulator/qcom_smd-regulator.c        | 92 +++++++++++++++++++
 drivers/regulator/qcom_spmi-regulator.c       | 43 +++++++++
 6 files changed, 187 insertions(+)