[v4,00/14] Add device tree support for sc7180

Message

Rajendra Nayak Nov. 6, 2019, 6:50 a.m. UTC

Changes in v4:
* Rebased on top of Rob;s for-next
* reorderd patches to take care of pdc dependency
* Updated pdc binding to use a soc specific and soc independent compatible
* Other updates based on v3 feedback, changes listed in each patch 

Changes in v3:
* PATCH 2/11: Updated the qup and uart lables to be consistent
with the naming convention followed in sdm845 as suggested
by Matthias
* Dropped 2 patches from v2 which added the new compatible and
binding updates for sc7180 pdc and reused sdm845 compatible instead
as suggested by Marc Z

This series adds DT support for basic peripherals on qualcomm's sc7180 SoC,
drivers for which are already upstream.

The series has a dependency on gcc clock driver patches [1]
to merge first

[1] https://www.spinics.net/lists/linux-clk/msg41851.html

Kiran Gunda (3):
  arm64: dts: qcom: sc7180: Add SPMI PMIC arbiter device
  arm64: dts: qcom: pm6150: Add PM6150/PM6150L PMIC peripherals
  arm64: dts: qcom: sc7180-idp: Add RPMh regulators

Maulik Shah (3):
  arm64: dts: qcom: sc7180: Add cmd_db reserved area
  arm64: dts: qcom: sc7180: Add rpmh-rsc node
  arm64: dts: qcom: sc7180: Add pdc interrupt controller

Rajendra Nayak (5):
  dt-bindings: qcom: Add SC7180 bindings
  arm64: dts: sc7180: Add minimal dts/dtsi files for SC7180 soc
  dt-bindings: arm-smmu: update binding for qcom sc7180 SoC
  drivers: irqchip: qcom-pdc: Move to an SoC independent compatible
  dt-bindings: qcom,pdc: Add compatible for sc7180

Roja Rani Yarubandi (1):
  arm64: dts: sc7180: Add qupv3_0 and qupv3_1

Taniya Das (1):
  arm64: dts: qcom: SC7180: Add node for rpmhcc clock driver

Vivek Gautam (1):
  arm64: dts: sc7180: Add device node for apps_smmu

 .../devicetree/bindings/arm/qcom.yaml         |    6 +
 .../interrupt-controller/qcom,pdc.txt         |    3 +-
 .../devicetree/bindings/iommu/arm,smmu.yaml   |    1 +
 arch/arm64/boot/dts/qcom/Makefile             |    1 +
 arch/arm64/boot/dts/qcom/pm6150.dtsi          |   72 ++
 arch/arm64/boot/dts/qcom/pm6150l.dtsi         |   31 +
 arch/arm64/boot/dts/qcom/sc7180-idp.dts       |  402 ++++++
 arch/arm64/boot/dts/qcom/sc7180.dtsi          | 1133 +++++++++++++++++
 drivers/irqchip/qcom-pdc.c                    |    2 +-
 9 files changed, 1649 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm64/boot/dts/qcom/pm6150.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/pm6150l.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/sc7180-idp.dts
 create mode 100644 arch/arm64/boot/dts/qcom/sc7180.dtsi