mbox series

[v1,0/6] Qualcomm CCI & Camera for db410c & db845c

Message ID 20200311123501.18202-1-robert.foss@linaro.org (mailing list archive)
Headers show
Series Qualcomm CCI & Camera for db410c & db845c | expand

Message

Robert Foss March 11, 2020, 12:34 p.m. UTC 
This series depends on the Qualcom CCI I2C driver series:
https://patchwork.kernel.org/cover/10569957/

This series enables basic camera functionality on the Qualcomm db410c and
db845c (RB3) platforms.

This includes building drivers as modules, adding devicetree nodes
for camera controllers, clocks, regulators and sensor nodes.

Loic Poulain (2):
  arm64: dts: msm8916: Add i2c-qcom-cci node
  arm64: dts: apq8016-sbc: Add CCI/Sensor nodes

Robert Foss (4):
  arm64: dts: sdm845: Add i2c-qcom-cci node
  arm64: dts: sdm845-db845c: Add pm_8998 gpio names
  arm64: dts: sdm845-db845c: Add ov8856 & ov7251 camera nodes
  arm64: defconfig: Enable QCOM CAMCC, CAMSS and CCI drivers

 arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi  |  75 ++++++
 arch/arm64/boot/dts/qcom/msm8916.dtsi      |  27 ++
 arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 273 +++++++++++++++++++++
 arch/arm64/boot/dts/qcom/sdm845.dtsi       | 110 +++++++++
 arch/arm64/configs/defconfig               |   4 +
 5 files changed, 489 insertions(+)