[v2,0/8] arm64: dts: qcom: smmu/USB nodes and HDK855/HDK865 dts

Message ID	20200609194030.17756-1-jonathan@marek.ca (mailing list archive)
Headers	show Return-Path: <SRS0=mUZS=7W=vger.kernel.org=linux-arm-msm-owner@kernel.org> From: Jonathan Marek <jonathan@marek.ca> To: linux-arm-msm@vger.kernel.org Cc: Andy Gross <agross@kernel.org>, Bjorn Andersson <bjorn.andersson@linaro.org>, devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS), iommu@lists.linux-foundation.org (open list:IOMMU DRIVERS), Joerg Roedel <joro@8bytes.org>, linux-arm-kernel@lists.infradead.org (moderated list:ARM SMMU DRIVERS), linux-kernel@vger.kernel.org (open list), Rob Herring <robh+dt@kernel.org>, Robin Murphy <robin.murphy@arm.com>, Will Deacon <will@kernel.org> Subject: [PATCH v2 0/8] arm64: dts: qcom: smmu/USB nodes and HDK855/HDK865 dts Date: Tue, 9 Jun 2020 15:40:18 -0400 Message-Id: <20200609194030.17756-1-jonathan@marek.ca> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: linux-arm-msm-owner@vger.kernel.org Precedence: bulk
Series	arm64: dts: qcom: smmu/USB nodes and HDK855/HDK865 dts \| expand [v2,0/8] arm64: dts: qcom: smmu/USB nodes and HDK855/HDK865 dts [v2,1/8] dt-bindings: arm-smmu: Add sm8150 and sm8250 compatible strings [v2,2/8] iommu: arm-smmu-impl: Use qcom impl for sm8150 and sm8250 compatibles [v2,3/8] arm64: dts: qcom: sm8150: add apps_smmu node [v2,4/8] arm64: dts: qcom: sm8250: add apps_smmu node [v2,5/8] arm64: dts: qcom: sm8150: Add secondary USB and PHY nodes [v2,6/8] arm64: dts: qcom: sm8250: Add USB and PHY device nodes [v2,7/8] arm64: dts: qcom: add sm8150 hdk dts [v2,8/8] arm64: dts: qcom: add sm8250 hdk dts

Message ID

20200609194030.17756-1-jonathan@marek.ca (mailing list archive)

Headers

From: Jonathan Marek <jonathan@marek.ca>
To: linux-arm-msm@vger.kernel.org
Cc: Andy Gross <agross@kernel.org>,
        Bjorn Andersson <bjorn.andersson@linaro.org>,
        devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND FLATTENED
        DEVICE TREE BINDINGS),
        iommu@lists.linux-foundation.org (open list:IOMMU DRIVERS),
        Joerg Roedel <joro@8bytes.org>,
        linux-arm-kernel@lists.infradead.org (moderated list:ARM SMMU
 DRIVERS),
        linux-kernel@vger.kernel.org (open list),
        Rob Herring <robh+dt@kernel.org>,
        Robin Murphy <robin.murphy@arm.com>,
        Will Deacon <will@kernel.org>
Subject: [PATCH v2 0/8] arm64: dts: qcom: smmu/USB nodes and HDK855/HDK865 dts
Date: Tue,  9 Jun 2020 15:40:18 -0400
Message-Id: <20200609194030.17756-1-jonathan@marek.ca>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Sender: linux-arm-msm-owner@vger.kernel.org
Precedence: bulk

Series

arm64: dts: qcom: smmu/USB nodes and HDK855/HDK865 dts | expand

Message

Jonathan Marek June 9, 2020, 7:40 p.m. UTC

Add dts nodes for apps_smmu and USB for both sm8150 and sm8250.

Also add initial dts files for HDK855 and HDK865, based on mtp dts, with a
few changes. Notably, the HDK865 dts has regulator config changed a bit based
on downstream (I think sm8250-mtp.dts is wrong and copied too much from sm8150).

V2 changes:
* Added two patches for sm8150 and sm8250 iommu compatibles
* Changed apps_smmu node patches to use new compatibles
* Updated commit messages for apps_smmu patches to be more correct
* Updated HDK dts patches based on Bjorn's comments

Jonathan Marek (8):
  dt-bindings: arm-smmu: Add sm8150 and sm8250 compatible strings
  iommu: arm-smmu-impl: Use qcom impl for sm8150 and sm8250 compatibles
  arm64: dts: qcom: sm8150: add apps_smmu node
  arm64: dts: qcom: sm8250: add apps_smmu node
  arm64: dts: qcom: sm8150: Add secondary USB and PHY nodes
  arm64: dts: qcom: sm8250: Add USB and PHY device nodes
  arm64: dts: qcom: add sm8150 hdk dts
  arm64: dts: qcom: add sm8250 hdk dts

 .../devicetree/bindings/iommu/arm,smmu.yaml   |   2 +
 arch/arm64/boot/dts/qcom/Makefile             |   2 +
 arch/arm64/boot/dts/qcom/sm8150-hdk.dts       | 463 ++++++++++++++++++
 arch/arm64/boot/dts/qcom/sm8150.dtsi          | 180 +++++++
 arch/arm64/boot/dts/qcom/sm8250-hdk.dts       | 454 +++++++++++++++++
 arch/arm64/boot/dts/qcom/sm8250.dtsi          | 287 +++++++++++
 drivers/iommu/arm-smmu-impl.c                 |   4 +-
 7 files changed, 1391 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/qcom/sm8150-hdk.dts
 create mode 100644 arch/arm64/boot/dts/qcom/sm8250-hdk.dts

Comments

Will Deacon July 3, 2020, 12:31 p.m. UTC | #1

On Tue, Jun 09, 2020 at 03:40:18PM -0400, Jonathan Marek wrote:
> Add dts nodes for apps_smmu and USB for both sm8150 and sm8250.
> 
> Also add initial dts files for HDK855 and HDK865, based on mtp dts, with a
> few changes. Notably, the HDK865 dts has regulator config changed a bit based
> on downstream (I think sm8250-mtp.dts is wrong and copied too much from sm8150).
> 
> V2 changes:
> * Added two patches for sm8150 and sm8250 iommu compatibles
> * Changed apps_smmu node patches to use new compatibles
> * Updated commit messages for apps_smmu patches to be more correct
> * Updated HDK dts patches based on Bjorn's comments
> 
> Jonathan Marek (8):
>   dt-bindings: arm-smmu: Add sm8150 and sm8250 compatible strings
>   iommu: arm-smmu-impl: Use qcom impl for sm8150 and sm8250 compatibles
>   arm64: dts: qcom: sm8150: add apps_smmu node
>   arm64: dts: qcom: sm8250: add apps_smmu node
>   arm64: dts: qcom: sm8150: Add secondary USB and PHY nodes
>   arm64: dts: qcom: sm8250: Add USB and PHY device nodes
>   arm64: dts: qcom: add sm8150 hdk dts
>   arm64: dts: qcom: add sm8250 hdk dts

What's your plan for merging this? I can take the first two patches
via arm-smmu, if you like. Please just let me know.

Will

Bjorn Andersson July 9, 2020, 4:44 a.m. UTC | #2

On Fri 03 Jul 05:31 PDT 2020, Will Deacon wrote:

> On Tue, Jun 09, 2020 at 03:40:18PM -0400, Jonathan Marek wrote:
> > Add dts nodes for apps_smmu and USB for both sm8150 and sm8250.
> > 
> > Also add initial dts files for HDK855 and HDK865, based on mtp dts, with a
> > few changes. Notably, the HDK865 dts has regulator config changed a bit based
> > on downstream (I think sm8250-mtp.dts is wrong and copied too much from sm8150).
> > 
> > V2 changes:
> > * Added two patches for sm8150 and sm8250 iommu compatibles
> > * Changed apps_smmu node patches to use new compatibles
> > * Updated commit messages for apps_smmu patches to be more correct
> > * Updated HDK dts patches based on Bjorn's comments
> > 
> > Jonathan Marek (8):
> >   dt-bindings: arm-smmu: Add sm8150 and sm8250 compatible strings
> >   iommu: arm-smmu-impl: Use qcom impl for sm8150 and sm8250 compatibles
> >   arm64: dts: qcom: sm8150: add apps_smmu node
> >   arm64: dts: qcom: sm8250: add apps_smmu node
> >   arm64: dts: qcom: sm8150: Add secondary USB and PHY nodes
> >   arm64: dts: qcom: sm8250: Add USB and PHY device nodes
> >   arm64: dts: qcom: add sm8150 hdk dts
> >   arm64: dts: qcom: add sm8250 hdk dts
> 
> What's your plan for merging this? I can take the first two patches
> via arm-smmu, if you like. Please just let me know.
> 

Please pick up the binding and driver patch through your tree.

Regards,
Bjorn

Will Deacon July 9, 2020, 9:54 a.m. UTC | #3

On Tue, 9 Jun 2020 15:40:18 -0400, Jonathan Marek wrote:
> Add dts nodes for apps_smmu and USB for both sm8150 and sm8250.
> 
> Also add initial dts files for HDK855 and HDK865, based on mtp dts, with a
> few changes. Notably, the HDK865 dts has regulator config changed a bit based
> on downstream (I think sm8250-mtp.dts is wrong and copied too much from sm8150).
> 
> V2 changes:
> * Added two patches for sm8150 and sm8250 iommu compatibles
> * Changed apps_smmu node patches to use new compatibles
> * Updated commit messages for apps_smmu patches to be more correct
> * Updated HDK dts patches based on Bjorn's comments
> 
> [...]

Applied to will (for-joerg/arm-smmu/updates), thanks!

[1/2] dt-bindings: arm-smmu: Add sm8150 and sm8250 compatible strings
      https://git.kernel.org/will/c/7b6b70d88b10
[2/2] iommu: arm-smmu-impl: Use qcom impl for sm8150 and sm8250 compatibles
      https://git.kernel.org/will/c/2c5c3cfb2da5

Cheers,