[0/5] Samsung Galaxy S III Neo Initial DTS

Message

Bartosz Dudziak March 26, 2021, 2:58 p.m. UTC

This series of patches enables to boot MSM8226 SoC in Samsung Galaxy S III Neo
mobile phone. Implemented clocks are on top of MSM8974 GCC driver because there
is really little difference between them. UART serial communication is working.
I have working patches for the regulators, EMMC, multithreading and Wifi for
this device but they are not clean and ready to submit.

Bartosz Dudziak (5):
  dt-bindings: clock: qcom: Add MSM8226 GCC clock bindings
  clk: qcom: gcc: Add support for Global Clock controller found on
    MSM8226
  arm: dts: qcom: Add support for MSM8226 SoC
  dt-bindings: arm: qcom: Document MSM8226 SoC binding
  arm: dts: qcom: Add initial DTS file for Samsung Galaxy S III Neo
    phone

 .../devicetree/bindings/arm/qcom.yaml         |   6 +
 .../devicetree/bindings/clock/qcom,gcc.yaml   |  13 +-
 arch/arm/boot/dts/Makefile                    |   1 +
 .../boot/dts/qcom-msm8226-samsung-s3ve3g.dts  |  25 +++
 arch/arm/boot/dts/qcom-msm8226.dtsi           | 152 ++++++++++++++
 drivers/clk/qcom/gcc-msm8974.c                | 185 ++++++++++++++++--
 6 files changed, 364 insertions(+), 18 deletions(-)
 create mode 100644 arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts
 create mode 100644 arch/arm/boot/dts/qcom-msm8226.dtsi

Comments

Bartosz Dudziak April 18, 2021, 1 p.m. UTC | #1

On Fri, Mar 26, 2021 at 03:58:11PM +0100, Bartosz Dudziak wrote:
> This series of patches enables to boot MSM8226 SoC in Samsung Galaxy S III Neo
> mobile phone. Implemented clocks are on top of MSM8974 GCC driver because there
> is really little difference between them. UART serial communication is working.
> I have working patches for the regulators, EMMC, multithreading and Wifi for
> this device but they are not clean and ready to submit.
> 
> Bartosz Dudziak (5):
>   dt-bindings: clock: qcom: Add MSM8226 GCC clock bindings
>   clk: qcom: gcc: Add support for Global Clock controller found on
>     MSM8226
>   arm: dts: qcom: Add support for MSM8226 SoC
>   dt-bindings: arm: qcom: Document MSM8226 SoC binding
>   arm: dts: qcom: Add initial DTS file for Samsung Galaxy S III Neo
>     phone
> 
>  .../devicetree/bindings/arm/qcom.yaml         |   6 +
>  .../devicetree/bindings/clock/qcom,gcc.yaml   |  13 +-
>  arch/arm/boot/dts/Makefile                    |   1 +
>  .../boot/dts/qcom-msm8226-samsung-s3ve3g.dts  |  25 +++
>  arch/arm/boot/dts/qcom-msm8226.dtsi           | 152 ++++++++++++++
>  drivers/clk/qcom/gcc-msm8974.c                | 185 ++++++++++++++++--
>  6 files changed, 364 insertions(+), 18 deletions(-)
>  create mode 100644 arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts
>  create mode 100644 arch/arm/boot/dts/qcom-msm8226.dtsi
> 
> -- 
> 2.25.1
> 

I have sent version V2 of the patches