[v2,00/17] Enable Qualcomm Crypto Engine on sm8250

Message

Bhupesh Sharma May 5, 2021, 9:37 p.m. UTC

Changes since v1:
=================
- v1 can be seen here: https://lore.kernel.org/linux-arm-msm/[e-mail]/ 
- v1 did not work well as reported earlier by Dmitry, so v2 contains the following
  changes/fixes:
  ~ Enable the interconnect path b/w BAM DMA and main memory first
    before trying to access the BAM DMA registers.
  ~ Enable the interconnect path b/w qce crytpo and main memory first
    before trying to access the qce crypto registers.
  ~ Make sure to document the required and optional properties for both
    BAM DMA and qce crypto drivers.
  ~ Add a few debug related print messages in case the qce crypto driver
    passes or fails to probe.
  ~ Convert the qce crypto driver probe to a defered one in case the BAM DMA
    or the interconnect driver(s) (needed on specific Qualcomm parts) are not
    yet probed.

Qualcomm crypto engine is also available on sm8250 SoC.
It supports hardware accelerated algorithms for encryption
and authentication. It also provides support for aes, des, 3des
encryption algorithms and sha1, sha256, hmac(sha1), hmac(sha256)
authentication algorithms.

Tested the enabled crypto algorithms with cryptsetup test utilities
on sm8250-mtp and RB5 board (see [1]).

While at it, also make a minor fix in 'sdm845.dtsi', to make
sure it confirms with the other .dtsi files which expose
crypto nodes on qcom SoCs.

Cc: Thara Gopinath <[e-mail]>
Cc: Bjorn Andersson <[e-mail]>
Cc: Rob Herring <[e-mail]>
Cc: Andy Gross <[e-mail]>
Cc: Herbert Xu <[e-mail]>
Cc: David S. Miller <[e-mail]>
Cc: Stephen Boyd <[e-mail]>
Cc: Michael Turquette <[e-mail]>
Cc: Vinod Koul <[e-mail]>
Cc: [e-mail]
Cc: [e-mail]
Cc: [e-mail]
Cc: [e-mail]
Cc: [e-mail]
Cc: [e-mail]
 
Bhupesh Sharma (14):
  dt-bindings: qcom-bam: Add 'interconnects' & 'interconnect-names' to
    optional properties
  dt-bindings: qcom-bam: Add 'iommus' to required properties
  dt-bindings: qcom-qce: Add 'iommus' to required properties
  dt-bindings: qcom-qce: Add 'interconnects' and move 'clocks' to
    optional properties
  arm64/dts: qcom: sdm845: Use RPMH_CE_CLK macro directly
  dt-bindings: crypto : Add new compatible strings for qcom-qce
  arm64/dts: qcom: Use new compatibles for crypto nodes
  crypto: qce: Add new compatibles for qce crypto driver
  crypto: qce: Print a failure msg in case probe() fails
  crypto: qce: Convert the device found dev_dbg() to dev_info()
  dma: qcom: bam_dma: Create a new header file for BAM DMA driver
  crypto: qce: Defer probing if BAM dma is not yet initialized
  crypto: qce: Defer probe in case interconnect is not yet initialized
  arm64/dts: qcom: sm8250: Add dt entries to support crypto engine.

Thara Gopinath (3):
  dma: qcom: bam_dma: Add support to initialize interconnect path
  crypto: qce: core: Add support to initialize interconnect path
  crypto: qce: core: Make clocks optional

 .../devicetree/bindings/crypto/qcom-qce.txt   |  22 +-
 .../devicetree/bindings/dma/qcom_bam_dma.txt  |   5 +
 arch/arm64/boot/dts/qcom/ipq6018.dtsi         |   2 +-
 arch/arm64/boot/dts/qcom/sdm845.dtsi          |   6 +-
 arch/arm64/boot/dts/qcom/sm8250.dtsi          |  28 ++
 drivers/crypto/qce/core.c                     | 112 +++++--
 drivers/crypto/qce/core.h                     |   3 +
 drivers/dma/qcom/bam_dma.c                    | 306 ++----------------
 include/soc/qcom/bam_dma.h                    | 290 +++++++++++++++++
 9 files changed, 457 insertions(+), 317 deletions(-)
 create mode 100644 include/soc/qcom/bam_dma.h

Comments

Eric Biggers May 5, 2021, 10:09 p.m. UTC | #1

On Thu, May 06, 2021 at 03:07:14AM +0530, Bhupesh Sharma wrote:
> 
> Tested the enabled crypto algorithms with cryptsetup test utilities
> on sm8250-mtp and RB5 board (see [1]).
> 

Does this driver also pass the crypto self-tests, including the fuzz tests
(CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y)?

- Eric

Bhupesh Sharma May 7, 2021, 9:12 p.m. UTC | #2

Hello Eric,

On Thu, 6 May 2021 at 03:39, Eric Biggers <[e-mail]> wrote:
>
> On Thu, May 06, 2021 at 03:07:14AM +0530, Bhupesh Sharma wrote:
> >
> > Tested the enabled crypto algorithms with cryptsetup test utilities
> > on sm8250-mtp and RB5 board (see [1]).
> >
>
> Does this driver also pass the crypto self-tests, including the fuzz tests
> (CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y)?

I did try running these self-tests and they pass with
'CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y' as well. Do note that we need
the AEAD fixes from Thara (see[1]) for all of the fuzz tests to work
(so my patches are actually rebased on this series).

[1]. https://lore.kernel.org/linux-crypto/[e-mail]/T/

Thanks,
Bhupesh

Rob Herring (Arm) May 7, 2021, 9:14 p.m. UTC | #3

On Thu, May 06, 2021 at 03:07:14AM +0530, Bhupesh Sharma wrote:
> Changes since v1:
> =================
> - v1 can be seen here: https://lore.kernel.org/linux-arm-msm/[e-mail]/ 
> - v1 did not work well as reported earlier by Dmitry, so v2 contains the following
>   changes/fixes:
>   ~ Enable the interconnect path b/w BAM DMA and main memory first
>     before trying to access the BAM DMA registers.
>   ~ Enable the interconnect path b/w qce crytpo and main memory first
>     before trying to access the qce crypto registers.
>   ~ Make sure to document the required and optional properties for both
>     BAM DMA and qce crypto drivers.
>   ~ Add a few debug related print messages in case the qce crypto driver
>     passes or fails to probe.
>   ~ Convert the qce crypto driver probe to a defered one in case the BAM DMA
>     or the interconnect driver(s) (needed on specific Qualcomm parts) are not
>     yet probed.
> 
> Qualcomm crypto engine is also available on sm8250 SoC.
> It supports hardware accelerated algorithms for encryption
> and authentication. It also provides support for aes, des, 3des
> encryption algorithms and sha1, sha256, hmac(sha1), hmac(sha256)
> authentication algorithms.
> 
> Tested the enabled crypto algorithms with cryptsetup test utilities
> on sm8250-mtp and RB5 board (see [1]).
> 
> While at it, also make a minor fix in 'sdm845.dtsi', to make
> sure it confirms with the other .dtsi files which expose
> crypto nodes on qcom SoCs.
> 
> Cc: Thara Gopinath <[e-mail]>
> Cc: Bjorn Andersson <[e-mail]>
> Cc: Rob Herring <[e-mail]>
> Cc: Andy Gross <[e-mail]>
> Cc: Herbert Xu <[e-mail]>
> Cc: David S. Miller <[e-mail]>
> Cc: Stephen Boyd <[e-mail]>
> Cc: Michael Turquette <[e-mail]>
> Cc: Vinod Koul <[e-mail]>
> Cc: [e-mail]
> Cc: [e-mail]
> Cc: [e-mail]
> Cc: [e-mail]
> Cc: [e-mail]
> Cc: [e-mail]
>  
> Bhupesh Sharma (14):
>   dt-bindings: qcom-bam: Add 'interconnects' & 'interconnect-names' to
>     optional properties
>   dt-bindings: qcom-bam: Add 'iommus' to required properties
>   dt-bindings: qcom-qce: Add 'iommus' to required properties
>   dt-bindings: qcom-qce: Add 'interconnects' and move 'clocks' to
>     optional properties
>   arm64/dts: qcom: sdm845: Use RPMH_CE_CLK macro directly
>   dt-bindings: crypto : Add new compatible strings for qcom-qce

Please convert these bindings to schemas.


>   arm64/dts: qcom: Use new compatibles for crypto nodes
>   crypto: qce: Add new compatibles for qce crypto driver
>   crypto: qce: Print a failure msg in case probe() fails
>   crypto: qce: Convert the device found dev_dbg() to dev_info()
>   dma: qcom: bam_dma: Create a new header file for BAM DMA driver
>   crypto: qce: Defer probing if BAM dma is not yet initialized
>   crypto: qce: Defer probe in case interconnect is not yet initialized
>   arm64/dts: qcom: sm8250: Add dt entries to support crypto engine.
> 
> Thara Gopinath (3):
>   dma: qcom: bam_dma: Add support to initialize interconnect path
>   crypto: qce: core: Add support to initialize interconnect path
>   crypto: qce: core: Make clocks optional
> 
>  .../devicetree/bindings/crypto/qcom-qce.txt   |  22 +-
>  .../devicetree/bindings/dma/qcom_bam_dma.txt  |   5 +
>  arch/arm64/boot/dts/qcom/ipq6018.dtsi         |   2 +-
>  arch/arm64/boot/dts/qcom/sdm845.dtsi          |   6 +-
>  arch/arm64/boot/dts/qcom/sm8250.dtsi          |  28 ++
>  drivers/crypto/qce/core.c                     | 112 +++++--
>  drivers/crypto/qce/core.h                     |   3 +
>  drivers/dma/qcom/bam_dma.c                    | 306 ++----------------
>  include/soc/qcom/bam_dma.h                    | 290 +++++++++++++++++
>  9 files changed, 457 insertions(+), 317 deletions(-)
>  create mode 100644 include/soc/qcom/bam_dma.h
> 
> -- 
> 2.30.2
>

Bhupesh Sharma May 8, 2021, 6:56 p.m. UTC | #4

Hi Rob,

On Sat, 8 May 2021 at 02:44, Rob Herring <[e-mail]> wrote:
>
> On Thu, May 06, 2021 at 03:07:14AM +0530, Bhupesh Sharma wrote:
> > Changes since v1:
> > =================
> > - v1 can be seen here: https://lore.kernel.org/linux-arm-msm/[e-mail]/
> > - v1 did not work well as reported earlier by Dmitry, so v2 contains the following
> >   changes/fixes:
> >   ~ Enable the interconnect path b/w BAM DMA and main memory first
> >     before trying to access the BAM DMA registers.
> >   ~ Enable the interconnect path b/w qce crytpo and main memory first
> >     before trying to access the qce crypto registers.
> >   ~ Make sure to document the required and optional properties for both
> >     BAM DMA and qce crypto drivers.
> >   ~ Add a few debug related print messages in case the qce crypto driver
> >     passes or fails to probe.
> >   ~ Convert the qce crypto driver probe to a defered one in case the BAM DMA
> >     or the interconnect driver(s) (needed on specific Qualcomm parts) are not
> >     yet probed.
> >
> > Qualcomm crypto engine is also available on sm8250 SoC.
> > It supports hardware accelerated algorithms for encryption
> > and authentication. It also provides support for aes, des, 3des
> > encryption algorithms and sha1, sha256, hmac(sha1), hmac(sha256)
> > authentication algorithms.
> >
> > Tested the enabled crypto algorithms with cryptsetup test utilities
> > on sm8250-mtp and RB5 board (see [1]).
> >
> > While at it, also make a minor fix in 'sdm845.dtsi', to make
> > sure it confirms with the other .dtsi files which expose
> > crypto nodes on qcom SoCs.
> >
> > Cc: Thara Gopinath <[e-mail]>
> > Cc: Bjorn Andersson <[e-mail]>
> > Cc: Rob Herring <[e-mail]>
> > Cc: Andy Gross <[e-mail]>
> > Cc: Herbert Xu <[e-mail]>
> > Cc: David S. Miller <[e-mail]>
> > Cc: Stephen Boyd <[e-mail]>
> > Cc: Michael Turquette <[e-mail]>
> > Cc: Vinod Koul <[e-mail]>
> > Cc: [e-mail]
> > Cc: [e-mail]
> > Cc: [e-mail]
> > Cc: [e-mail]
> > Cc: [e-mail]
> > Cc: [e-mail]
> >
> > Bhupesh Sharma (14):
> >   dt-bindings: qcom-bam: Add 'interconnects' & 'interconnect-names' to
> >     optional properties
> >   dt-bindings: qcom-bam: Add 'iommus' to required properties
> >   dt-bindings: qcom-qce: Add 'iommus' to required properties
> >   dt-bindings: qcom-qce: Add 'interconnects' and move 'clocks' to
> >     optional properties
> >   arm64/dts: qcom: sdm845: Use RPMH_CE_CLK macro directly
> >   dt-bindings: crypto : Add new compatible strings for qcom-qce
>
> Please convert these bindings to schemas.

Ok, will fix it in v3.

Thanks,
Bhupesh

>
> >   arm64/dts: qcom: Use new compatibles for crypto nodes
> >   crypto: qce: Add new compatibles for qce crypto driver
> >   crypto: qce: Print a failure msg in case probe() fails
> >   crypto: qce: Convert the device found dev_dbg() to dev_info()
> >   dma: qcom: bam_dma: Create a new header file for BAM DMA driver
> >   crypto: qce: Defer probing if BAM dma is not yet initialized
> >   crypto: qce: Defer probe in case interconnect is not yet initialized
> >   arm64/dts: qcom: sm8250: Add dt entries to support crypto engine.
> >
> > Thara Gopinath (3):
> >   dma: qcom: bam_dma: Add support to initialize interconnect path
> >   crypto: qce: core: Add support to initialize interconnect path
> >   crypto: qce: core: Make clocks optional
> >
> >  .../devicetree/bindings/crypto/qcom-qce.txt   |  22 +-
> >  .../devicetree/bindings/dma/qcom_bam_dma.txt  |   5 +
> >  arch/arm64/boot/dts/qcom/ipq6018.dtsi         |   2 +-
> >  arch/arm64/boot/dts/qcom/sdm845.dtsi          |   6 +-
> >  arch/arm64/boot/dts/qcom/sm8250.dtsi          |  28 ++
> >  drivers/crypto/qce/core.c                     | 112 +++++--
> >  drivers/crypto/qce/core.h                     |   3 +
> >  drivers/dma/qcom/bam_dma.c                    | 306 ++----------------
> >  include/soc/qcom/bam_dma.h                    | 290 +++++++++++++++++
> >  9 files changed, 457 insertions(+), 317 deletions(-)
> >  create mode 100644 include/soc/qcom/bam_dma.h
> >
> > --
> > 2.30.2
> >