mbox series

[0/8] arm64: dts: qcom: Add SA8155p-adp board DTS

Message ID 20210607113840.15435-1-bhupesh.sharma@linaro.org (mailing list archive)
Headers show
Series arm64: dts: qcom: Add SA8155p-adp board DTS | expand

Message

Bhupesh Sharma June 7, 2021, 11:38 a.m. UTC
This series adds DTS for SA8155p-adp board which is based on
Qualcomm snapdragon sm8150 SoC. 

This patchset also includes DTS for the two new PMICs PMM8155AU_1
and PMM8155AU_2 found on the adp board.

Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Andy Gross <agross@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-gpio@vger.kernel.org
Cc: bhupesh.linux@gmail.com

Bhupesh Sharma (8):
  dt-bindings: qcom: rpmh-regulator: Add compatible for SA8155p-adp
    board pmics
  dt-bindings: pinctrl: qcom,pmic-gpio: Add compatible for SA8155p-adp
  dt-bindings: arm: qcom: Add compatible for SA8155p-adp board
  regulator: qcom-rpmh: Add new regulator types found on SA8155p adp
    board
  pinctrl: qcom/pinctrl-spmi-gpio: Add compatibles for pmic-gpios on
    SA8155p-adp
  arm64: dts: qcom: pmm8155au_1: Add base dts file
  arm64: dts: qcom: pmm8155au_2: Add base dts file
  arm64: dts: qcom: sa8155p-adp: Add base dts file

 .../devicetree/bindings/arm/qcom.yaml         |   8 +
 .../bindings/pinctrl/qcom,pmic-gpio.txt       |   5 +
 .../regulator/qcom,rpmh-regulator.yaml        |   2 +
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi     | 134 +++++++
 arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi     | 107 +++++
 arch/arm64/boot/dts/qcom/sa8155p-adp.dts      | 375 ++++++++++++++++++
 drivers/pinctrl/qcom/pinctrl-spmi-gpio.c      |   4 +
 drivers/regulator/qcom-rpmh-regulator.c       |  72 ++++
 9 files changed, 708 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/sa8155p-adp.dts