mbox series

[00/10] dt-binding patches for sm6350

Message ID 20211213082614.22651-1-luca.weiss@fairphone.com (mailing list archive)
Headers show
Series dt-binding patches for sm6350 | expand

Message

Luca Weiss Dec. 13, 2021, 8:26 a.m. UTC 
This series adds compatibles to the dt-bindings documentation where it
was missed before.

Finally, the last patch solves some further dtbs_check errors by
modifying the sm6350.dtsi to match the binding docs more closely.

Please note, that the first patch from Konrad is a resend that wasn't
picked up when sent to the lists in August 2021.

Konrad Dybcio (1):
  dt-bindings: arm: msm: Add LLCC for SM6350

Luca Weiss (9):
  dt-bindings: firmware: scm: Add SM6350 compatible
  dt-bindings: qcom,pdc: Add SM6350 compatible
  dt-bindings: phy: qcom,qusb2: Add SM6350 compatible
  dt-bindings: thermal: tsens: Add SM6350 compatible
  dt-bindings: usb: qcom,dwc3: Add SM6350 compatible
  dt-bindings: watchdog: Add SM6350 and SM8250 compatible
  dt-bindings: arm: msm: Don't mark LLCC interrupt as required
  dt-bindings: simple-framebuffer: allow standalone compatible
  arm64: dts: qcom: sm6350: Fix validation errors

 .../devicetree/bindings/arm/msm/qcom,llcc.yaml   |  2 +-
 .../bindings/display/simple-framebuffer.yaml     | 12 +++++++-----
 .../devicetree/bindings/firmware/qcom,scm.txt    |  1 +
 .../bindings/interrupt-controller/qcom,pdc.txt   |  5 +++--
 .../devicetree/bindings/phy/qcom,qusb2-phy.yaml  |  1 +
 .../devicetree/bindings/thermal/qcom-tsens.yaml  |  1 +
 .../devicetree/bindings/usb/qcom,dwc3.yaml       |  1 +
 .../devicetree/bindings/watchdog/qcom-wdt.yaml   |  2 ++
 arch/arm64/boot/dts/qcom/sm6350.dtsi             | 16 ++++++++--------
 9 files changed, 25 insertions(+), 16 deletions(-)

Comments

Bjorn Andersson Dec. 15, 2021, 10:27 p.m. UTC | #1 
On Mon, 13 Dec 2021 09:26:01 +0100, Luca Weiss wrote:
> This series adds compatibles to the dt-bindings documentation where it
> was missed before.
> 
> Finally, the last patch solves some further dtbs_check errors by
> modifying the sm6350.dtsi to match the binding docs more closely.
> 
> Please note, that the first patch from Konrad is a resend that wasn't
> picked up when sent to the lists in August 2021.
> 
> [...]

Applied, thanks!

[10/10] arm64: dts: qcom: sm6350: Fix validation errors
        commit: f56498fc6a9364a35dd74af791bd1251467e9cc1

Best regards,