[0/3] thermal: qcom: tsens: Add data for MSM8909

Message

Stephan Gerhold June 27, 2022, 1:14 p.m. UTC

The MSM8909 SoC has 5 thermal sensors in a TSENS v0.1 block similar to
MSM8916. Add the data for MSM8909 to the existing tsens-v0_1.c driver
to make the thermal sensors work on MSM8909.

Stephan Gerhold (3):
  dt-bindings: thermal: qcom-tsens: Drop redundant compatibles
  dt-bindings: thermal: qcom-tsens: Add MSM8909 compatible
  thermal: qcom: tsens: Add data for MSM8909

 .../bindings/thermal/qcom-tsens.yaml          |   6 +-
 drivers/thermal/qcom/tsens-v0_1.c             | 119 +++++++++++++++++-
 drivers/thermal/qcom/tsens.c                  |   3 +
 drivers/thermal/qcom/tsens.h                  |   2 +-
 4 files changed, 123 insertions(+), 7 deletions(-)

Comments

Stephan Gerhold Sept. 8, 2022, 8:08 p.m. UTC | #1

Hi Daniel,

On Mon, Jun 27, 2022 at 03:14:12PM +0200, Stephan Gerhold wrote:
> The MSM8909 SoC has 5 thermal sensors in a TSENS v0.1 block similar to
> MSM8916. Add the data for MSM8909 to the existing tsens-v0_1.c driver
> to make the thermal sensors work on MSM8909.

Can you take a look at this series when you get a chance? It should be
mostly straightforward since it's just another platform with code
similar to the existing ones.

The series still applies cleanly on latest thermal/linux-next. But
just let me know if I should resend it anyway. :)

Thanks!
Stephan

> 
> Stephan Gerhold (3):
>   dt-bindings: thermal: qcom-tsens: Drop redundant compatibles
>   dt-bindings: thermal: qcom-tsens: Add MSM8909 compatible
>   thermal: qcom: tsens: Add data for MSM8909
> 
>  .../bindings/thermal/qcom-tsens.yaml          |   6 +-
>  drivers/thermal/qcom/tsens-v0_1.c             | 119 +++++++++++++++++-
>  drivers/thermal/qcom/tsens.c                  |   3 +
>  drivers/thermal/qcom/tsens.h                  |   2 +-
>  4 files changed, 123 insertions(+), 7 deletions(-)
> 
> -- 
> 2.30.2
>