mbox series

[v2,00/11] dt-bindings: display/msm: rework MDSS and DPU bindings

Message ID 20220710090040.35193-1-dmitry.baryshkov@linaro.org (mailing list archive)
Headers show
Series dt-bindings: display/msm: rework MDSS and DPU bindings | expand

Message

Dmitry Baryshkov July 10, 2022, 9 a.m. UTC 
Create separate YAML schema for MDSS devicesd$ (both for MDP5 and DPU
devices). Cleanup DPU schema files, so that they do not contain schema
for both MDSS and DPU nodes. Apply misc small fixes to the DPU schema
afterwards.

Changes since v1:
 - Renamed DPU device nodes from mdp@ to display-controller@
 - Described removal of mistakenly mentioned "lut" clock
 - Switched mdss.yaml to use $ref instead of fixing compatible strings
 - Dropped mdp-opp-table description (renamed by Krzysztof in his
   patchset)
 - Reworked DPU's ports definitions. Dropped description of individual
   ports, left only /ports $ref and description in dpu-common.yaml.

Dmitry Baryshkov (11):
  arm64: dts: qcom: sdm845: rename DPU device node
  arm64: dts: qcom: sc7180: rename DPU device node
  arm64: dts: qcom: sm8250: rename DPU device node
  dt-bindings: display/msm: split qcom, mdss bindings
  dt-bindings: display/msm: move qcom,sdm845-mdss schema to mdss.yaml
  dt-bindings: display/msm: move qcom,sc7180-mdss schema to mdss.yaml
  dt-bindings: display/msm: move qcom,sc7280-mdss schema to mdss.yaml
  dt-bindings: display/msm: move qcom,qcm2290-mdss schema to mdss.yaml
  dt-bindings: display/msm: move qcom,msm8998-mdss schema to mdss.yaml
  dt-bindings: display/mdm: add gcc-bus clock to dpu-smd845
  dt-bindings: display/msm: move common DPU properties to
    dpu-common.yaml

 .../bindings/display/msm/dpu-common.yaml      |  42 ++
 .../bindings/display/msm/dpu-msm8998.yaml     | 139 +------
 .../bindings/display/msm/dpu-qcm2290.yaml     | 143 +------
 .../bindings/display/msm/dpu-sc7180.yaml      | 148 +------
 .../bindings/display/msm/dpu-sc7280.yaml      | 147 +------
 .../bindings/display/msm/dpu-sdm845.yaml      | 139 +------
 .../devicetree/bindings/display/msm/mdp5.txt  |  30 +-
 .../devicetree/bindings/display/msm/mdss.yaml | 361 ++++++++++++++++++
 arch/arm64/boot/dts/qcom/sc7180.dtsi          |   2 +-
 arch/arm64/boot/dts/qcom/sdm845.dtsi          |   2 +-
 arch/arm64/boot/dts/qcom/sm8250.dtsi          |   2 +-
 11 files changed, 508 insertions(+), 647 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/display/msm/dpu-common.yaml
 create mode 100644 Documentation/devicetree/bindings/display/msm/mdss.yaml

Comments

Bjorn Andersson July 16, 2022, 3:18 p.m. UTC | #1 
On Sun, 10 Jul 2022 12:00:29 +0300, Dmitry Baryshkov wrote:
> Create separate YAML schema for MDSS devicesd$ (both for MDP5 and DPU
> devices). Cleanup DPU schema files, so that they do not contain schema
> for both MDSS and DPU nodes. Apply misc small fixes to the DPU schema
> afterwards.
> 
> Changes since v1:
>  - Renamed DPU device nodes from mdp@ to display-controller@
>  - Described removal of mistakenly mentioned "lut" clock
>  - Switched mdss.yaml to use $ref instead of fixing compatible strings
>  - Dropped mdp-opp-table description (renamed by Krzysztof in his
>    patchset)
>  - Reworked DPU's ports definitions. Dropped description of individual
>    ports, left only /ports $ref and description in dpu-common.yaml.
> 
> [...]

Applied, thanks!

[01/11] arm64: dts: qcom: sdm845: rename DPU device node
        commit: 1d52eb6cc827d0f166c728a7577609de75b6b8b1
[02/11] arm64: dts: qcom: sc7180: rename DPU device node
        commit: 37e3558b79392ab864fe887b4593c5f737e063a5
[03/11] arm64: dts: qcom: sm8250: rename DPU device node
        commit: ce5cf986cdab1973df0042ac5b743d5df008c338

Best regards,