mbox series

[v3,00/34] pinctrl/arm64: qcom: continued - fix Qualcomm TLMM pinctrl schema warnings

Message ID 20220927173702.5200-1-krzysztof.kozlowski@linaro.org (mailing list archive)
Headers show
Series pinctrl/arm64: qcom: continued - fix Qualcomm TLMM pinctrl schema warnings | expand

Message

Krzysztof Kozlowski Sept. 27, 2022, 5:36 p.m. UTC
Hi,

Changes since v2
================
1. ipq6018-cp01-c1: do not switch to blsp1 (Robert).
2. pinctrl: qcom,ipq6018: correct BLSP6->BLSP0 functions: new patch.
3. Drop quotes from $ref when not needed (Rob).
4. Add Rb tags. Few patches from v1 got review from Rob, but I changed them in
   v2 significantly, so I did not keep these Rb tags.

Changes since v1
================
v1: https://lore.kernel.org/linux-devicetree/20220924080459.13084-1-krzysztof.kozlowski@linaro.org/T/#t
1. As Stephan suggested, move check for function on non-GPIO pins to common
   TLMM schema.  This affects few commits in the set named:
   "use common TLMM schema"
   "do not require function on non-GPIOs"

Overview
========
This is the third, independent patchset around Qualcomm pinctrl in recent days:
1. First round of TLMM fixes: merged
2. LPASS fixes:
   https://lore.kernel.org/linux-devicetree/20220927153429.55365-1-krzysztof.kozlowski@linaro.org/T/#t
3. ARMv7 TLMM fixes: *THIS PATCHSET*
4. ARMv8 remaining TLMM fixes: v1 send:
   https://lore.kernel.org/linux-devicetree/20220925110608.145728-1-krzysztof.kozlowski@linaro.org/T/#t

Dependencies
============
1. No dependencies.
2. dt-bindings are independent of DTS patches.

Best regards,
Krzysztof

Krzysztof Kozlowski (34):
  arm64: dts: qcom: ipq6018-cp01-c1: use BLSPI1 pins
  arm64: dts: qcom: ipq6018: align TLMM pin configuration with DT schema
  ARM: dts: qcom: sdx55: add gpio-ranges to TLMM pinctrl
  ARM: dts: qcom: sdx55: align TLMM pin configuration with DT schema
  ARM: dts: qcom: msm8226: align TLMM pin configuration with DT schema
  ARM: dts: qcom: msm8974: align TLMM pin configuration with DT schema
  dt-bindings: pinctrl: qcom,tlmm-common: add common check for function
  dt-bindings: pinctrl: qcom,ipq6018: add qpic_pad function
  dt-bindings: pinctrl: qcom,ipq6018: correct BLSP6->BLSP0 functions
  dt-bindings: pinctrl: qcom,ipq6018: increase number of pins in pinmux
  dt-bindings: pinctrl: qcom,ipq6018: fix matching pin config
  dt-bindings: pinctrl: qcom,ipq6018: use common TLMM schema
  dt-bindings: pinctrl: qcom,ipq6018: fix indentation in example
  dt-bindings: pinctrl: qcom,msm8226: fix matching pin config
  dt-bindings: pinctrl: qcom,msm8226: use common TLMM schema
  dt-bindings: pinctrl: qcom,msm8226: add functions and input-enable
  dt-bindings: pinctrl: qcom,msm8226: fix indentation in example
  dt-bindings: pinctrl: qcom,msm8909-tlmm: fix matching pin config
  dt-bindings: pinctrl: qcom,msm8909-tlmm: do not require function on
    non-GPIOs
  dt-bindings: pinctrl: qcom,msm8909-tlmm: fix indentation in example
  dt-bindings: pinctrl: qcom,msm8953: fix matching pin config
  dt-bindings: pinctrl: qcom,msm8953: use common TLMM schema
  dt-bindings: pinctrl: qcom,msm8953: fix indentation in example
  dt-bindings: pinctrl: qcom,mdm9607: do not require function on
    non-GPIOs
  dt-bindings: pinctrl: qcom,mdm9607: fix indentation in example
  dt-bindings: pinctrl: qcom,qcm2290: fix matching pin config
  dt-bindings: pinctrl: qcom,qcm2290: use common TLMM schema
  dt-bindings: pinctrl: qcom,sdx55: fix matching pin config
  dt-bindings: pinctrl: qcom,sdx55: use common TLMM schema
  dt-bindings: pinctrl: qcom,sdx55: fix indentation in example
  dt-bindings: pinctrl: qcom,sdx65: fix matching pin config
  dt-bindings: pinctrl: qcom,sdx65: use common TLMM schema
  dt-bindings: pinctrl: qcom,sc7280: fix matching pin config
  dt-bindings: pinctrl: qcom,sc8280xp: fix indentation in example
    (remaining piece)

 .../pinctrl/qcom,ipq6018-pinctrl.yaml         | 66 ++++++++++---------
 .../pinctrl/qcom,mdm9607-pinctrl.yaml         | 23 ++++---
 .../pinctrl/qcom,msm8226-pinctrl.yaml         | 63 ++++++++++--------
 .../bindings/pinctrl/qcom,msm8909-tlmm.yaml   | 64 +++++++++---------
 .../pinctrl/qcom,msm8953-pinctrl.yaml         | 51 +++++++-------
 .../pinctrl/qcom,qcm2290-pinctrl.yaml         | 11 ++--
 .../bindings/pinctrl/qcom,sc7280-pinctrl.yaml | 14 +++-
 .../pinctrl/qcom,sc8280xp-pinctrl.yaml        |  4 +-
 .../bindings/pinctrl/qcom,sdx55-pinctrl.yaml  | 51 +++++++-------
 .../bindings/pinctrl/qcom,sdx65-pinctrl.yaml  | 12 ++--
 .../bindings/pinctrl/qcom,tlmm-common.yaml    | 20 ++++--
 arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts   |  6 +-
 arch/arm/boot/dts/qcom-msm8226.dtsi           | 24 +++----
 .../qcom-msm8974-lge-nexus5-hammerhead.dts    | 30 ++++-----
 .../boot/dts/qcom-sdx55-telit-fn980-tlb.dts   | 45 +++++--------
 arch/arm/boot/dts/qcom-sdx55.dtsi             |  1 +
 arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts  |  6 +-
 arch/arm64/boot/dts/qcom/ipq6018.dtsi         |  4 +-
 18 files changed, 266 insertions(+), 229 deletions(-)

Comments

Bjorn Andersson Oct. 18, 2022, 3:05 a.m. UTC | #1
On Tue, 27 Sep 2022 19:36:28 +0200, Krzysztof Kozlowski wrote:
> Changes since v2
> ================
> 1. ipq6018-cp01-c1: do not switch to blsp1 (Robert).
> 2. pinctrl: qcom,ipq6018: correct BLSP6->BLSP0 functions: new patch.
> 3. Drop quotes from $ref when not needed (Rob).
> 4. Add Rb tags. Few patches from v1 got review from Rob, but I changed them in
>    v2 significantly, so I did not keep these Rb tags.
> 
> [...]

Applied, thanks!

[03/34] ARM: dts: qcom: sdx55: add gpio-ranges to TLMM pinctrl
        commit: 0139f183bcddcf5b36f805254bb0f0625963f783
[04/34] ARM: dts: qcom: sdx55: align TLMM pin configuration with DT schema
        commit: bda79af488a3e75769433fb961800c39bb07b29c
[05/34] ARM: dts: qcom: msm8226: align TLMM pin configuration with DT schema
        commit: df9c86025510c45a6d90669347129e8000e1bbbc
[06/34] ARM: dts: qcom: msm8974: align TLMM pin configuration with DT schema
        commit: 6cd72414abc7345e277fcab5e1c763c3a017dc6a

Best regards,