mbox series

[v5,0/3] Add dtsi for sc7280 boards that using rt5682

Message ID 20220930152613.2018360-1-judyhsiao@chromium.org (mailing list archive)
Headers show
Series Add dtsi for sc7280 boards that using rt5682 | expand

Message

Judy Hsiao Sept. 30, 2022, 3:26 p.m. UTC
Put sound node and lpass_cpu node settings for boards that use rt5682
codec in the sc7280-herobrine-audio-rt5682.dtsi as there are different
choices of headset codec for herobrine projects. Common audio setting
for the internal speaker is in sc7280-herobrine.dtsi.

Change Since V4
- Rebase and include sc7280-herobrine-villager-r0.dts change.

Changes Since V3:
- Remove Change-Id in the commit message.
- Add dependency in cover letter.

Changes Since V2:
- Fix sc7280-herobrine-audio-rt5682.dtsi syntax.

Changes Since V1:
- Not to include the herobrine-villager-r0.dts changes in this patch
  series to avoid conflict.

Judy Hsiao (3):
  arm64: dts: qcom: sc7280: herobrine: Add pinconf settings for mi2s1
  arm64: dts: qcom: sc7280: Add sc7280-herobrine-audio-rt5682.dtsi
  arm64: dts: qcom: sc7280: Include sc7280-herobrine-audio-rt5682.dtsi
    in herobrine-r1 and villager-r0

 .../qcom/sc7280-herobrine-audio-rt5682.dtsi   | 122 ++++++++++++++++++
 .../qcom/sc7280-herobrine-herobrine-r1.dts    |   1 +
 .../dts/qcom/sc7280-herobrine-villager-r0.dts |   1 +
 .../arm64/boot/dts/qcom/sc7280-herobrine.dtsi |  30 +++++
 4 files changed, 154 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi

Comments

Krzysztof Kozlowski Oct. 7, 2022, 4:11 p.m. UTC | #1
On 30/09/2022 17:26, Judy Hsiao wrote:
> Put sound node and lpass_cpu node settings for boards that use rt5682
> codec in the sc7280-herobrine-audio-rt5682.dtsi as there are different
> choices of headset codec for herobrine projects. Common audio setting
> for the internal speaker is in sc7280-herobrine.dtsi.
> 
> Change Since V4
> - Rebase and include sc7280-herobrine-villager-r0.dts change.

Please use scripts/get_maintainers.pl to get a list of necessary people
and lists to CC.  It might happen, that command when run on an older
kernel, gives you outdated entries.  Therefore please be sure you base
your patches on recent Linux kernel.

Best regards,
Krzysztof