mbox series

[v2,0/1] Add MSM8976 Device tree

Message ID 20221101191659.172416-1-a39.skl@gmail.com (mailing list archive)
Headers show
Series Add MSM8976 Device tree | expand

Message

Adam Skladowski Nov. 1, 2022, 7:16 p.m. UTC 
This patch introduce devicetree for MSM8976 SoC,
most of already supported hardware should be described there.
Note about v2:
Based on advice from Bjorn i decided to keep clocks container,
this format appears in every other qcom dts.

Changes since v1
================
1. Dropped l1 i/d cache from cpu nodes.
2. Replaced xo_board with rpmcc where possible.
3. Added base address to memory node.
4. Padded addresses to 8 digits.
5. Moved imem to mmio range.
6. Adjusted mdss te pin name.
7. Reorganized reg positions per Konrad's request.

Adam Skladowski (1):
  arm64: dts: qcom: Add MSM8976 device tree

 arch/arm64/boot/dts/qcom/msm8976.dtsi | 1310 +++++++++++++++++++++++++
 1 file changed, 1310 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/msm8976.dtsi