[v5,00/21] mdss-dsi-ctrl binding and dts fixes

Message

Bryan O'Donoghue Dec. 20, 2022, 12:36 p.m. UTC

V5:
- Adds compat strings to bindings/display/msm/qcom,SoC-mdss.yaml - Dmitry
- Re-orders simple fixes to the start of the series to allow backports - Dmitry 
- VDDA and drop of node-names - Krzysztof
- Deprecates qcom,dsi-ctrl-6g-qcm2290 - Krzysztof, Dmitry
- Expands set of updated files to include new msm8953 - bod
- Converts to agreed compat string qcom,SoC-dsi-ctrl hence
  -              - qcom,mdss-dsi-ctrl-msm8996
  +              - qcom,msm8996-dsi-ctrl
- Adds RB where indicated for the compat strings.
V4:
- Moves the update of the example from patch #5 to patch #4

V3:
- Moves declaration of mdss-dsi-ctrl into compat string declaration
  patch - Krzysztof, Dmitry
- Renames qcm-2290 compat string to agreed compat "qcom,socname-dsi-ctrl"
  Dmirty, Krzysztof
- Adds empty line after if clause in yaml control flow section - Dmirty
- Adds Rb/Ack - Krzysztof, Dmitry, Doug, David
- vdd*
  Looking into this some more, I don't believe vdd, vdda, vddio ought to be
  required properties. Its up to the PCB manufacturer and the panel in-use
  how that panel is powered. Powering the panel is not something that
  even necessarily needs to be done from the dsi-ctrl driver.
  Originally marking vdd* as required in the .txt was an error, its not a
  SoC level dtsi requirement.
- clock-names
  Rather than replicate the clock-name in each if block I listed them with
  a specific description from a similar reference in usb/qcom,dwc3.yaml.
 
https://lore.kernel.org/linux-arm-msm/[e-mail]/

V2:
https://www.spinics.net/lists/linux-arm-msm/msg116326.html

- Moves the DSI PHY changes to a different later series.
  There are enough dsi-controller-main changes to justify its own
  standalone series.

- The original phy-name binding change given discussion with Rob and
  Krzysztof became its own standalone series that has since been merged.
  https://www.mail-archive.com/[e-mail]/msg403214.html

- Retains the drop of power-domain from yaml as a required property.
  I dug into the available dtsi. The apq8064 doesn't appear to have any
  GDSC which can be attached as a power-domain, which means the
  power-domain requirement is not universal across the various silicon
  versions.

- Adds Dmitry's RB to power-domain drop

- For the clock declarations I've
  * I noticed that the simple change I had worked for msm8939 but
    subsquently broke other dtsi which drove a bigger change to document
    the clocks on a per compatible basis.
  * Added compat strings in yaml.
  * Moved the allOf down later in the file to acomodate the if/then.
  * Number of clocks validated on a per compatible basis
  * The driver code which doesn't care about the number of clocks
    can still operate on the mdss-dsi-ctrl compat but the dts checks will
    validate against the compat string and yaml.

- vdd descriptions
  Took the previous text I missed from the .txt file - Krzysztof, Dmitry
  Adds vdd, vdda and vddio to the required list. This exposes warnings in
  existing dtsi but the previous .txt declared these regulators as
  required. - Krzysztof
 
V1:
This series fixes up a number of dtbs checks which are being flagged adding
in the msm8939 dtsi.


When converting from .txt to .yaml a number of the parameters for the older
msm8916 silicon were not transmitted into the yaml.

Adding in the msm8939 which is a near 1:1 copy of the msm8916 in terms of
dtsi triggers a rake of dtbs checks as a result.

https://www.mail-archive.com/[e-mail]/msg403211.html

Bryan O'Donoghue (21):
  dt-bindings: msm: dsi-controller-main: Fix operating-points-v2
    constraint
  dt-bindings: msm: dsi-controller-main: Fix power-domain constraint
  dt-bindings: msm: dsi-controller-main: Fix description of core clock
  dt-bindings: msm: dsi-controller-main: Add compatible strings for
    every current SoC
  dt-bindings: msm: dsi-controller-main: Deprecate
    qcom,dsi-ctrl-6g-qcm2290 in favour of qcom,qcm2290-dsi-ctrl
  dt-bindings: msm: dsi-controller-main: Document clocks on a per
    compatible basis
  dt-bindings: msm: dsi-controller-main: Fix clock declarations
  dt-bindings: msm: dsi-controller-main: Add vdd* descriptions back in
  dt-bindings: display/msm: Add list of mdss-dsi-ctrl compats
  dt-bindings: display/msm: Update MDSS dsi compat strings
  ARM: dts: qcom: apq8064: add compat qcom,apq8064-dsi-ctrl
  ARM: dts: qcom: msm8974: Add compat qcom,msm8974-dsi-ctrl
  arm64: dts: qcom: msm8916: Add compat qcom,msm8916-dsi-ctrl
  arm64: dts: qcom: msm8953: Add compat qcom,msm8953-dsi-ctrl
  arm64: dts: qcom: msm8996: Add compat qcom,msm8996-dsi-ctrl
  arm64: dts: qcom: sc7180: Add compat qcom,sc7180-dsi-ctrl
  arm64: dts: qcom: sc7280: Add compat qcom,sc7280-dsi-ctrl
  arm64: dts: qcom: sdm630: Add compat qcom,sdm660-dsi-ctrl
  arm64: dts: qcom: sdm660: Add compat qcom,sdm660-dsi-ctrl
  arm64: dts: qcom: sdm845: Add compat qcom,sdm845-dsi-ctrl
  arm64: dts: qcom: sm8250: Add compat qcom,sm8250-dsi-ctrl

 .../display/msm/dsi-controller-main.yaml      | 250 ++++++++++++++++--
 .../bindings/display/msm/qcom,mdss.yaml       |  16 +-
 .../display/msm/qcom,msm8998-mdss.yaml        |   8 +-
 .../display/msm/qcom,sc7180-mdss.yaml         |   6 +-
 .../display/msm/qcom,sc7280-mdss.yaml         |   6 +-
 .../display/msm/qcom,sdm845-mdss.yaml         |   8 +-
 .../display/msm/qcom,sm8250-mdss.yaml         |   8 +-
 arch/arm/boot/dts/qcom-apq8064.dtsi           |   3 +-
 arch/arm/boot/dts/qcom-msm8974.dtsi           |   3 +-
 arch/arm64/boot/dts/qcom/msm8916.dtsi         |   3 +-
 arch/arm64/boot/dts/qcom/msm8953.dtsi         |   4 +-
 arch/arm64/boot/dts/qcom/msm8996.dtsi         |   6 +-
 arch/arm64/boot/dts/qcom/sc7180.dtsi          |   3 +-
 arch/arm64/boot/dts/qcom/sc7280.dtsi          |   3 +-
 arch/arm64/boot/dts/qcom/sdm630.dtsi          |   3 +-
 arch/arm64/boot/dts/qcom/sdm660.dtsi          |   3 +-
 arch/arm64/boot/dts/qcom/sdm845.dtsi          |   6 +-
 arch/arm64/boot/dts/qcom/sm8250.dtsi          |   6 +-
 18 files changed, 293 insertions(+), 52 deletions(-)