mbox series

[0/5] arm64: dts: qcom: sm6125-seine: Configure regulators and enable SD Card

Message ID 20221222203636.250190-1-marijn.suijten@somainline.org (mailing list archive)
Headers show
Series arm64: dts: qcom: sm6125-seine: Configure regulators and enable SD Card | expand

Message

Marijn Suijten Dec. 22, 2022, 8:36 p.m. UTC 
Configure regulators on Sony's SM6125-backed seine platform, and provide
these regulators to existing (SDHCI 1 / HS USB2 PHY) nodes so that they
can cast their votes despite being left enabled by the bootloader.

In addition this allows us to enable the SD Card slot on SDHCI 2, which
would not function without turning on the necessary regulators (i.e.
these were /not/ left enabled by the BL, for good reason).

Depends on:
- SM6125 APPS SMMU: https://lore.kernel.org/linux-arm-msm/20221222193254.126925-1-marijn.suijten@somainline.org/T/#u
- SM6125 GPI DMA: https://lore.kernel.org/linux-arm-msm/20221222194600.139854-1-marijn.suijten@somainline.org/T/#u
- SM6125 QUPs, SPI and I2C: https://lore.kernel.org/linux-arm-msm/20221216233408.1283581-1-marijn.suijten@somainline.org/T/#u

(To prevent DTS conflicts with the &qupv3_id_0 node override right above
&rpm_requests.)

Marijn Suijten (5):
  arm64: dts: qcom: sm6125-seine: Configure PM6125 regulators
  arm64: dts: qcom: sm6125-seine: Provide regulators to HS USB2 PHY
  arm64: dts: qcom: sm6125-seine: Provide regulators to SDHCI 1
  arm64: dts: qcom: sm6125-seine: Configure SD Card slot on SDHCI 2
  arm64: dts: qcom: sm6125-seine: Lock eMMC and SD Card IDs via aliases

 .../qcom/sm6125-sony-xperia-seine-pdx201.dts  | 162 ++++++++++++++++++
 1 file changed, 162 insertions(+)

--
2.39.0

Comments

Bjorn Andersson Dec. 29, 2022, 5:23 p.m. UTC | #1 
On Thu, 22 Dec 2022 21:36:31 +0100, Marijn Suijten wrote:
> Configure regulators on Sony's SM6125-backed seine platform, and provide
> these regulators to existing (SDHCI 1 / HS USB2 PHY) nodes so that they
> can cast their votes despite being left enabled by the bootloader.
> 
> In addition this allows us to enable the SD Card slot on SDHCI 2, which
> would not function without turning on the necessary regulators (i.e.
> these were /not/ left enabled by the BL, for good reason).
> 
> [...]

Applied, thanks!

[1/5] arm64: dts: qcom: sm6125-seine: Configure PM6125 regulators
      commit: 7421a8d2f1394ee9f8b5fd87121f055e56ab4e60
[2/5] arm64: dts: qcom: sm6125-seine: Provide regulators to HS USB2 PHY
      commit: 232bb8073b5b3ec043459b34535542ea5ca81694
[3/5] arm64: dts: qcom: sm6125-seine: Provide regulators to SDHCI 1
      commit: 68aadbe7805901b52b18595dcbe36442ebf26d93
[4/5] arm64: dts: qcom: sm6125-seine: Configure SD Card slot on SDHCI 2
      commit: d696b1618bc1a416a4ab72a1176cfdf187ca09bf
[5/5] arm64: dts: qcom: sm6125-seine: Lock eMMC and SD Card IDs via aliases
      commit: fa7ff6e9f14a05f304587ba566a4f445a2a74aa6

Best regards,