[v2,0/2] arm64: dts: qcom: sm6350: enable IPA

Message

Alex Elder Jan. 4, 2023, 7:37 p.m. UTC

Enable IPA for the SM6350 SoC, which implements IPA v4.7.  Enable it
on the Fairphone 4, which incorporates IPA definitions used for the
SM6350.

Version 2 of this series uses the new "qcom,gsi-loader" property to
specify that the AP should load firmware on this platform.

					-Alex

Luca Weiss (2):
  arm64: dts: qcom: sm6350: add IPA node
  arm64: dts: qcom: sm7225-fairphone-fp4: enable IPA

 arch/arm64/boot/dts/qcom/sm6350.dtsi          | 47 +++++++++++++++++++
 .../boot/dts/qcom/sm7225-fairphone-fp4.dts    |  7 +++
 2 files changed, 54 insertions(+)

Comments

Bjorn Andersson Jan. 18, 2023, 11:55 p.m. UTC | #1

On Wed, 4 Jan 2023 13:37:57 -0600, Alex Elder wrote:
> Enable IPA for the SM6350 SoC, which implements IPA v4.7.  Enable it
> on the Fairphone 4, which incorporates IPA definitions used for the
> SM6350.
> 
> Version 2 of this series uses the new "qcom,gsi-loader" property to
> specify that the AP should load firmware on this platform.
> 
> [...]

Applied, thanks!

[1/2] arm64: dts: qcom: sm6350: add IPA node
      commit: aed7154a30239f0275b13d622e1edd9d4d356308
[2/2] arm64: dts: qcom: sm7225-fairphone-fp4: enable IPA
      commit: 60bf8740870e0377f29b44593c0bfbab379b4909

Best regards,