mbox series

[0/2] arm64: dts: qcom: Add Qualcomm RB2 board dts

Message ID 20230314210828.2049720-1-bhupesh.sharma@linaro.org (mailing list archive)
Headers show
Series arm64: dts: qcom: Add Qualcomm RB2 board dts | expand

Message

Bhupesh Sharma March 14, 2023, 9:08 p.m. UTC 
Add an initial device tree for Qualcomm RB2 board (see [1]).
Currently it enables:
    - eMMC via SDHC1,
    - uSD card via SDHC2,
    - RPM regulators,
    - Debug UART (via micro USB port).

Subsequent patchset(s) will add more peripherals like USB, etc.

To get a successful boot run:
    
   $ cat arch/arm64/boot/Image.gz arch/arm64/boot/dts/qcom/\
    qrb4210-rb2.dtb > ./Image-adp.gz+dtb

   $ mkbootimg --kernel ./Image-adp.gz+dtb \
     --ramdisk ./some-initramfs-image.rootfs.img \
     --output ./rb2-boot.img --pagesize 4096 \
     --base 0x80000000 --cmdline 'SOME_CMDLINE'
    
   $ fastboot boot ./rb2-boot.img

[1]. https://www.qualcomm.com/products/internet-of-things/industrial/industrial-automation/qualcomm-robotics-rb2-platform#Overview

Bhupesh Sharma (2):
  dt-bindings: arm: qcom: Document the  Qualcomm qrb4210-rb2 board
  arm64: dts: qcom: Add base qrb4210-rb2 board dts

 .../devicetree/bindings/arm/qcom.yaml         |   1 +
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 arch/arm64/boot/dts/qcom/qrb4210-rb2.dts      | 337 ++++++++++++++++++
 3 files changed, 339 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/qrb4210-rb2.dts