mbox series

[v1,0/2] Add support for vibrator in multiple PMICs

Message ID 20230717062547.2086869-1-quic_fenglinw@quicinc.com (mailing list archive)
Headers show
Series Add support for vibrator in multiple PMICs | expand

Message

Fenglin Wu July 17, 2023, 6:25 a.m. UTC 
Add SW support for the vibrator module inside PMI632, PM7250B, PM7325B, PM7550BA.
It is very similar to the vibrator module inside PM8916 which is supported in
pm8xxx-vib driver but just the drive amplitude is controlled with 2 registers,
and the register base offset in each PMIC is different.

Fenglin Wu (2):
  dt-bindings: input: qcom,pm8xxx-vib: add more PMIC support
  Input: pm8xxx-vib - Add support for more PMICs

 .../bindings/input/qcom,pm8xxx-vib.yaml       |  4 ++
 drivers/input/misc/pm8xxx-vibrator.c          | 49 +++++++++++++++++++
 2 files changed, 53 insertions(+)