| Message ID | 20230731053712.2220898-1-quic_fenglinw@quicinc.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | Add support for vibrator in multiple PMICs | expand |
Hi Fenglin, On Mon Jul 31, 2023 at 7:37 AM CEST, Fenglin Wu wrote: > Add SW support for the vibrator module inside PMI632, PM7250B, PM7325B, PM7550BA. > It is very similar to the vibrator module inside PM8916 which is supported in > pm8xxx-vib driver but just the drive amplitude is controlled with 2 registers, > and the register base offset in each PMIC is different. Briefly tested on a SDM632+PMI632-based Fairphone 3. I didn't really check for vibration strength or anything more detailed but with the fftest tool the vibrator seems to work fine! Diff is attached below. I can send the pmi632.dtsi change once this series is merged (unless you send something first). Many thanks for sending these patches! Tested-by: Luca Weiss <luca.weiss@fairphone.com> # sdm632-fairphone-fp3 (pmi632) Regards Luca diff --git a/arch/arm64/boot/dts/qcom/pmi632.dtsi b/arch/arm64/boot/dts/qcom/pmi632.dtsi index 4eb79e0ce40a..41ef7dad508e 100644 --- a/arch/arm64/boot/dts/qcom/pmi632.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi632.dtsi @@ -161,5 +161,11 @@ pmi632_lpg: pwm { status = "disabled"; }; + + pmi632_vib: vibrator@5700 { + compatible = "qcom,pmi632-vib", "qcom,spmi-vib-gen2"; + reg = <0x5700>; + status = "disabled"; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts index 301eca9a4f31..0d89bc39f613 100644 --- a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts +++ b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts @@ -112,6 +112,10 @@ led@3 { }; }; +&pmi632_vib { + status = "okay"; +}; + &sdhc_1 { status = "okay"; vmmc-supply = <&pm8953_l8>; > Changes in v4: > 1. Update to use the combination of the HW type and register offset > as the constant match data, the register base address defined in > 'reg' property will be added when accessing SPMI registers using > regmap APIs. > 2. Remove 'qcom,spmi-vib-gen1' generic compatible string. > > Changes in v3: > 1. Refactor the driver to support different type of the vibrators with > better flexibility by introducing the HW type with corresponding > register fields definitions. > 2. Add 'qcom,spmi-vib-gen1' and 'qcom,spmi-vib-gen2' compatible > strings, and add PMI632, PM7250B, PM7325B, PM7550BA as compatbile as > spmi-vib-gen2. > > Changes in v2: > Remove the "pm7550ba-vib" compatible string as it's compatible with pm7325b. > > Fenglin Wu (3): > input: pm8xxx-vib: refactor to easily support new SPMI vibrator > dt-bindings: input: qcom,pm8xxx-vib: add new SPMI vibrator module > input: pm8xxx-vibrator: add new SPMI vibrator support > > .../bindings/input/qcom,pm8xxx-vib.yaml | 16 +- > drivers/input/misc/pm8xxx-vibrator.c | 171 ++++++++++++------ > 2 files changed, 132 insertions(+), 55 deletions(-)
Add SW support for the vibrator module inside PMI632, PM7250B, PM7325B, PM7550BA. It is very similar to the vibrator module inside PM8916 which is supported in pm8xxx-vib driver but just the drive amplitude is controlled with 2 registers, and the register base offset in each PMIC is different. Changes in v4: 1. Update to use the combination of the HW type and register offset as the constant match data, the register base address defined in 'reg' property will be added when accessing SPMI registers using regmap APIs. 2. Remove 'qcom,spmi-vib-gen1' generic compatible string. Changes in v3: 1. Refactor the driver to support different type of the vibrators with better flexibility by introducing the HW type with corresponding register fields definitions. 2. Add 'qcom,spmi-vib-gen1' and 'qcom,spmi-vib-gen2' compatible strings, and add PMI632, PM7250B, PM7325B, PM7550BA as compatbile as spmi-vib-gen2. Changes in v2: Remove the "pm7550ba-vib" compatible string as it's compatible with pm7325b. Fenglin Wu (3): input: pm8xxx-vib: refactor to easily support new SPMI vibrator dt-bindings: input: qcom,pm8xxx-vib: add new SPMI vibrator module input: pm8xxx-vibrator: add new SPMI vibrator support .../bindings/input/qcom,pm8xxx-vib.yaml | 16 +- drivers/input/misc/pm8xxx-vibrator.c | 171 ++++++++++++------ 2 files changed, 132 insertions(+), 55 deletions(-)