mbox series

[RESEND,v6,00/12] arm64: qcom: add and enable SHM Bridge support

Message ID 20240122102157.22761-1-brgl@bgdev.pl (mailing list archive)
Headers show
Series arm64: qcom: add and enable SHM Bridge support | expand

Message

Bartosz Golaszewski Jan. 22, 2024, 10:21 a.m. UTC
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Resending after the merge window. I dropped the first patch which was a
fix and was picked up last release cycle.

We've established the need for using separate secured memory pools for
SCM and QSEECOM as well as the upcoming scminvoke driver.

It's also become clear that in order to be future-proof, the new
allocator must be an abstraction layer of a higher level as the SHM
Bridge will not be the only memory protection mechanism that we'll see
upstream. Hence the rename to TrustZone Memory rather than SCM Memory
allocator.

Also to that end: the new allocator is its own module now and provides a
Kconfig choice menu for selecting the mode of operation (currently
default and SHM Bridge).

Tested on sm8550 and sa8775p with the Inline Crypto Engine and
remoteproc.

v5 -> v6:
Fixed two issues reported by autobuilders:
- add a fix for memory leaks in the qseecom driver as the first patch for
  easier backporting to the v6.6.y branch
- explicitly cast the bus address stored in a variable of type dma_addr_t
  to phys_addr_t expected by the genpool API

v4 -> v5:
- fix the return value from qcom_tzmem_init() if SHM Bridge is not supported
- remove a comment that's no longer useful
- collect tags

v3 -> v4:
- include linux/sizes.h for SZ_X macros
- use dedicated RCU APIs to dereference radix tree slots
- fix kerneldocs
- fix the comment in patch 14/15: it's the hypervisor, not the TrustZone
  that creates the SHM bridge

v2 -> v3:
- restore pool management and use separate pools for different users
- don't use the new allocator in qcom_scm_pas_init_image() as the
  TrustZone will create an SHM bridge for us here
- rewrite the entire series again for most part

v1 -> v2:
- too many changes to list, it's a complete rewrite as explained above

Bartosz Golaszewski (12):
  firmware: qcom: add a dedicated TrustZone buffer allocator
  firmware: qcom: scm: enable the TZ mem allocator
  firmware: qcom: scm: smc: switch to using the SCM allocator
  firmware: qcom: scm: make qcom_scm_assign_mem() use the TZ allocator
  firmware: qcom: scm: make qcom_scm_ice_set_key() use the TZ allocator
  firmware: qcom: scm: make qcom_scm_lmh_dcvsh() use the TZ allocator
  firmware: qcom: scm: make qcom_scm_qseecom_app_get_id() use the TZ
    allocator
  firmware: qcom: qseecom: convert to using the TZ allocator
  firmware: qcom: scm: add support for SHM bridge operations
  firmware: qcom: tzmem: enable SHM Bridge support
  firmware: qcom: scm: clarify the comment in qcom_scm_pas_init_image()
  arm64: defconfig: enable SHM Bridge support for the TZ memory
    allocator

 MAINTAINERS                                   |   8 +
 arch/arm64/configs/defconfig                  |   1 +
 drivers/firmware/qcom/Kconfig                 |  30 ++
 drivers/firmware/qcom/Makefile                |   1 +
 .../firmware/qcom/qcom_qseecom_uefisecapp.c   | 281 +++++---------
 drivers/firmware/qcom/qcom_scm-smc.c          |  30 +-
 drivers/firmware/qcom/qcom_scm.c              | 179 +++++----
 drivers/firmware/qcom/qcom_scm.h              |   6 +
 drivers/firmware/qcom/qcom_tzmem.c            | 365 ++++++++++++++++++
 drivers/firmware/qcom/qcom_tzmem.h            |  13 +
 include/linux/firmware/qcom/qcom_qseecom.h    |   4 +-
 include/linux/firmware/qcom/qcom_scm.h        |   6 +
 include/linux/firmware/qcom/qcom_tzmem.h      |  28 ++
 13 files changed, 684 insertions(+), 268 deletions(-)
 create mode 100644 drivers/firmware/qcom/qcom_tzmem.c
 create mode 100644 drivers/firmware/qcom/qcom_tzmem.h
 create mode 100644 include/linux/firmware/qcom/qcom_tzmem.h

Comments

Bartosz Golaszewski Feb. 1, 2024, 3:06 p.m. UTC | #1
On Mon, Jan 22, 2024 at 11:22 AM Bartosz Golaszewski <brgl@bgdev.pl> wrote:
>
> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
>
> Resending after the merge window. I dropped the first patch which was a
> fix and was picked up last release cycle.
>
> We've established the need for using separate secured memory pools for
> SCM and QSEECOM as well as the upcoming scminvoke driver.
>
> It's also become clear that in order to be future-proof, the new
> allocator must be an abstraction layer of a higher level as the SHM
> Bridge will not be the only memory protection mechanism that we'll see
> upstream. Hence the rename to TrustZone Memory rather than SCM Memory
> allocator.
>
> Also to that end: the new allocator is its own module now and provides a
> Kconfig choice menu for selecting the mode of operation (currently
> default and SHM Bridge).
>
> Tested on sm8550 and sa8775p with the Inline Crypto Engine and
> remoteproc.
>
> v5 -> v6:
> Fixed two issues reported by autobuilders:
> - add a fix for memory leaks in the qseecom driver as the first patch for
>   easier backporting to the v6.6.y branch
> - explicitly cast the bus address stored in a variable of type dma_addr_t
>   to phys_addr_t expected by the genpool API
>
> v4 -> v5:
> - fix the return value from qcom_tzmem_init() if SHM Bridge is not supported
> - remove a comment that's no longer useful
> - collect tags
>
> v3 -> v4:
> - include linux/sizes.h for SZ_X macros
> - use dedicated RCU APIs to dereference radix tree slots
> - fix kerneldocs
> - fix the comment in patch 14/15: it's the hypervisor, not the TrustZone
>   that creates the SHM bridge
>
> v2 -> v3:
> - restore pool management and use separate pools for different users
> - don't use the new allocator in qcom_scm_pas_init_image() as the
>   TrustZone will create an SHM bridge for us here
> - rewrite the entire series again for most part
>
> v1 -> v2:
> - too many changes to list, it's a complete rewrite as explained above
>
> Bartosz Golaszewski (12):
>   firmware: qcom: add a dedicated TrustZone buffer allocator
>   firmware: qcom: scm: enable the TZ mem allocator
>   firmware: qcom: scm: smc: switch to using the SCM allocator
>   firmware: qcom: scm: make qcom_scm_assign_mem() use the TZ allocator
>   firmware: qcom: scm: make qcom_scm_ice_set_key() use the TZ allocator
>   firmware: qcom: scm: make qcom_scm_lmh_dcvsh() use the TZ allocator
>   firmware: qcom: scm: make qcom_scm_qseecom_app_get_id() use the TZ
>     allocator
>   firmware: qcom: qseecom: convert to using the TZ allocator
>   firmware: qcom: scm: add support for SHM bridge operations
>   firmware: qcom: tzmem: enable SHM Bridge support
>   firmware: qcom: scm: clarify the comment in qcom_scm_pas_init_image()
>   arm64: defconfig: enable SHM Bridge support for the TZ memory
>     allocator
>
>  MAINTAINERS                                   |   8 +
>  arch/arm64/configs/defconfig                  |   1 +
>  drivers/firmware/qcom/Kconfig                 |  30 ++
>  drivers/firmware/qcom/Makefile                |   1 +
>  .../firmware/qcom/qcom_qseecom_uefisecapp.c   | 281 +++++---------
>  drivers/firmware/qcom/qcom_scm-smc.c          |  30 +-
>  drivers/firmware/qcom/qcom_scm.c              | 179 +++++----
>  drivers/firmware/qcom/qcom_scm.h              |   6 +
>  drivers/firmware/qcom/qcom_tzmem.c            | 365 ++++++++++++++++++
>  drivers/firmware/qcom/qcom_tzmem.h            |  13 +
>  include/linux/firmware/qcom/qcom_qseecom.h    |   4 +-
>  include/linux/firmware/qcom/qcom_scm.h        |   6 +
>  include/linux/firmware/qcom/qcom_tzmem.h      |  28 ++
>  13 files changed, 684 insertions(+), 268 deletions(-)
>  create mode 100644 drivers/firmware/qcom/qcom_tzmem.c
>  create mode 100644 drivers/firmware/qcom/qcom_tzmem.h
>  create mode 100644 include/linux/firmware/qcom/qcom_tzmem.h
>
> --
> 2.40.1
>

Bjorn,

I tested it on db410c as well so let me gently ping you about picking
it up into your tree.

Bartosz