mbox series

[0/3] arm64: qcom: add support for QCS8550 RB5gen2 HDK board

Message ID 20240202133638.4720-1-quic_wasimn@quicinc.com (mailing list archive)
Headers show
Series arm64: qcom: add support for QCS8550 RB5gen2 HDK board | expand

Message

Wasim Nazir Feb. 2, 2024, 1:36 p.m. UTC
RB5gen2-HDK is Thundercomm's development platform used for IOT solutions.
It is based on Rb5gen2-SOM which is using QCOM's QCS8550 SoC.

On-board components:
- Qualcomm QCS8550 SoC
- LPDDR5, 12 GiB
- UFS3.1, 128 GiB
- USB3.1

On-board PMICs:
- PM8550VS
- PM8550VE
- PM8550
- PM8550BH
- PMK8550
- PMR735D
- PM8010

This series depends on [1].

[1]: https://lore.kernel.org/all/20240119100621.11788-1-quic_tengfan@quicinc.com/


Wasim Nazir (3):
  dt-bindings: arm: qcom: Document rb5gen2-hdk board
  arm64: dts: qcom: Add initial support for rb5gen2 SOM
  arm64: dts: qcom: Add initial support for rb5gen2 HDK board

 .../devicetree/bindings/arm/qcom.yaml         |   9 +
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 .../boot/dts/qcom/qcs8550-rb5gen2-hdk.dts     | 136 ++++++
 arch/arm64/boot/dts/qcom/qcs8550-rb5gen2.dtsi | 438 ++++++++++++++++++
 4 files changed, 584 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/qcs8550-rb5gen2-hdk.dts
 create mode 100644 arch/arm64/boot/dts/qcom/qcs8550-rb5gen2.dtsi

--
2.43.0