mbox series

[v3,0/2] arm64: add minimal boot support for TP-Link Archer AX55 v1

Message ID 20240313-archer-ax55-v1-v3-0-cd9402efab59@gmail.com (mailing list archive)
Headers show
Series arm64: add minimal boot support for TP-Link Archer AX55 v1 | expand

Message

Gabor Juhos March 13, 2024, 6:25 p.m. UTC
The purpose of this series to add minimal boot support for the
TP-Link Archer AX55 v1 dual-band wireless router.

There are two patches:
  - the first one adds the compatible for the board into the dt-bindings
    documentation,
  - the second patch introduces a minimal device tree source which can be
    used for booting initramfs images

---
Changes in v3:
  - change pin configuration to use "gpio20" and "gpio21" for UART pins
    in patch 2/2
  - rebase on top of v6.8
  - Link to v2: https://lore.kernel.org/r/20240226-archer-ax55-v1-v2-0-3776eb61f432@gmail.com

Changes in v2:
  - reorder pin configuration properties in patch 2/2
  - add 'Acked-by' tag to patch 1/2
  - Link to v1: https://lore.kernel.org/r/20240223-archer-ax55-v1-v1-0-99f8fa2c3858@gmail.com

---
Gabor Juhos (2):
      dt-bindings: arm: qcom: add TP-Link Archer AX55 v1
      arm64: dts: qcom: add TP-Link Archer AX55 v1

 Documentation/devicetree/bindings/arm/qcom.yaml    |   1 +
 arch/arm64/boot/dts/qcom/Makefile                  |   1 +
 .../dts/qcom/ipq5018-tplink-archer-ax55-v1.dts     | 132 +++++++++++++++++++++
 3 files changed, 134 insertions(+)
---
base-commit: 0becfaedccee979a5f270647e573b52668669a4a
change-id: 20240221-archer-ax55-v1-73ed91a97c6e

Best regards,

Comments

Rob Herring (Arm) March 15, 2024, 3:50 p.m. UTC | #1
On Wed, 13 Mar 2024 19:25:38 +0100, Gabor Juhos wrote:
> The purpose of this series to add minimal boot support for the
> TP-Link Archer AX55 v1 dual-band wireless router.
> 
> There are two patches:
>   - the first one adds the compatible for the board into the dt-bindings
>     documentation,
>   - the second patch introduces a minimal device tree source which can be
>     used for booting initramfs images
> 
> ---
> Changes in v3:
>   - change pin configuration to use "gpio20" and "gpio21" for UART pins
>     in patch 2/2
>   - rebase on top of v6.8
>   - Link to v2: https://lore.kernel.org/r/20240226-archer-ax55-v1-v2-0-3776eb61f432@gmail.com
> 
> Changes in v2:
>   - reorder pin configuration properties in patch 2/2
>   - add 'Acked-by' tag to patch 1/2
>   - Link to v1: https://lore.kernel.org/r/20240223-archer-ax55-v1-v1-0-99f8fa2c3858@gmail.com
> 
> ---
> Gabor Juhos (2):
>       dt-bindings: arm: qcom: add TP-Link Archer AX55 v1
>       arm64: dts: qcom: add TP-Link Archer AX55 v1
> 
>  Documentation/devicetree/bindings/arm/qcom.yaml    |   1 +
>  arch/arm64/boot/dts/qcom/Makefile                  |   1 +
>  .../dts/qcom/ipq5018-tplink-archer-ax55-v1.dts     | 132 +++++++++++++++++++++
>  3 files changed, 134 insertions(+)
> ---
> base-commit: 0becfaedccee979a5f270647e573b52668669a4a
> change-id: 20240221-archer-ax55-v1-73ed91a97c6e
> 
> Best regards,
> --
> Gabor Juhos <j4g8y7@gmail.com>
> 
> 
> 


My bot found new DTB warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade


New warnings running 'make CHECK_DTBS=y qcom/ipq5018-tplink-archer-ax55-v1.dtb' for 20240313-archer-ax55-v1-v3-0-cd9402efab59@gmail.com:

arch/arm64/boot/dts/qcom/ipq5018-tplink-archer-ax55-v1.dtb: usb@8af8800: interrupts: [[0, 62, 4]] is too short
	from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
arch/arm64/boot/dts/qcom/ipq5018-tplink-archer-ax55-v1.dtb: usb@8af8800: interrupt-names: ['hs_phy_irq'] is too short
	from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
arch/arm64/boot/dts/qcom/ipq5018-tplink-archer-ax55-v1.dtb: usb@8af8800: interrupts: [[0, 62, 4]] is too short
	from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
arch/arm64/boot/dts/qcom/ipq5018-tplink-archer-ax55-v1.dtb: usb@8af8800: interrupt-names:0: 'pwr_event' was expected
	from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
arch/arm64/boot/dts/qcom/ipq5018-tplink-archer-ax55-v1.dtb: usb@8af8800: interrupt-names: ['hs_phy_irq'] is too short
	from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#