| Message ID | 20240520-otter-bringup-v2-0-d717d1dab6b8@linaro.org (mailing list archive) |
|---|---|
| Headers | show |
| Series | qcom: initial support for the SHIFTphone 8 | expand |
On Mon, 20 May 2024 17:29:40 +0200, Caleb Connolly wrote: > The SHIFTphone 8 is an upcoming QCM6490 smartphone, it has the following > features: > > * 12GB of RAM, 512GB UFS storage > * 1080p display. > * Hardware kill switches for cameras and microphones > * UART access via type-c SBU pins (enabled by an internal switch) > > Initial support includes: > > * Framebuffer display > * UFS and sdcard storage > * Battery monitoring and USB role switching via pmic glink > * Bluetooth > * Thermals > > Wifi works but requires some commits to be reverted to prevent a > firmware crash. > > The serial port on the device can be accessed via the usb-cereal > adapter, it must first be enabled by flipping the switch under the > display. Additional info can be found on the postmarketOS wiki page. > > https://wiki.postmarketos.org/wiki/SHIFT_SHIFTphone_8_(shift-otter) > > --- > Changes in v2: > - Fix authorship > - Address Luca's feedback > - Link to v1: https://lore.kernel.org/r/20240508-otter-bringup-v1-0-c807d3d931f6@linaro.org > > --- > Caleb Connolly (2): > dt-bindings: arm: qcom: Add QCM6490 SHIFTphone 8 > arm64: dts: qcom: add QCM6490 SHIFTphone 8 > > Documentation/devicetree/bindings/arm/qcom.yaml | 1 + > arch/arm64/boot/dts/qcom/Makefile | 1 + > arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts | 923 +++++++++++++++++++++++ > 3 files changed, 925 insertions(+) > --- > change-id: 20240507-otter-bringup-388cf3aa7ca5 > base-commit: a38297e3fb012ddfa7ce0321a7e5a8daeb1872b6 > > // Caleb (they/them) > > > My bot found new DTB warnings on the .dts files added or changed in this series. Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings are fixed by another series. Ultimately, it is up to the platform maintainer whether these warnings are acceptable or not. No need to reply unless the platform maintainer has comments. If you already ran DT checks and didn't see these error(s), then make sure dt-schema is up to date: pip3 install dtschema --upgrade New warnings running 'make CHECK_DTBS=y qcom/qcm6490-shift-otter.dtb' for 20240520-otter-bringup-v2-0-d717d1dab6b8@linaro.org: arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dtb: pcie@1c08000: interrupts: [[0, 307, 4], [0, 308, 4], [0, 309, 4], [0, 312, 4], [0, 313, 4], [0, 314, 4], [0, 374, 4], [0, 375, 4]] is too long from schema $id: http://devicetree.org/schemas/pci/qcom,pcie-sc7280.yaml# arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dtb: pcie@1c08000: interrupt-names:0: 'msi' was expected from schema $id: http://devicetree.org/schemas/pci/qcom,pcie-sc7280.yaml# arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dtb: pcie@1c08000: interrupt-names: ['msi0', 'msi1', 'msi2', 'msi3', 'msi4', 'msi5', 'msi6', 'msi7'] is too long from schema $id: http://devicetree.org/schemas/pci/qcom,pcie-sc7280.yaml# arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dtb: phy@88e3000: 'orientation-switch' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/phy/qcom,usb-snps-femto-v2.yaml# arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dtb: usb@8cf8800: interrupt-names: ['pwr_event', 'hs_phy_irq', 'dp_hs_phy_irq', 'dm_hs_phy_irq'] is too short from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml# arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dtb: video-codec@aa00000: iommus: [[65, 8576, 32]] is too short from schema $id: http://devicetree.org/schemas/media/qcom,sc7280-venus.yaml#
The SHIFTphone 8 is an upcoming QCM6490 smartphone, it has the following features: * 12GB of RAM, 512GB UFS storage * 1080p display. * Hardware kill switches for cameras and microphones * UART access via type-c SBU pins (enabled by an internal switch) Initial support includes: * Framebuffer display * UFS and sdcard storage * Battery monitoring and USB role switching via pmic glink * Bluetooth * Thermals Wifi works but requires some commits to be reverted to prevent a firmware crash. The serial port on the device can be accessed via the usb-cereal adapter, it must first be enabled by flipping the switch under the display. Additional info can be found on the postmarketOS wiki page. https://wiki.postmarketos.org/wiki/SHIFT_SHIFTphone_8_(shift-otter) --- Changes in v2: - Fix authorship - Address Luca's feedback - Link to v1: https://lore.kernel.org/r/20240508-otter-bringup-v1-0-c807d3d931f6@linaro.org --- Caleb Connolly (2): dt-bindings: arm: qcom: Add QCM6490 SHIFTphone 8 arm64: dts: qcom: add QCM6490 SHIFTphone 8 Documentation/devicetree/bindings/arm/qcom.yaml | 1 + arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts | 923 +++++++++++++++++++++++ 3 files changed, 925 insertions(+) --- change-id: 20240507-otter-bringup-388cf3aa7ca5 base-commit: a38297e3fb012ddfa7ce0321a7e5a8daeb1872b6 // Caleb (they/them)