mbox series

[0/7] Add CPU frequency scaling support for MSM8226

Message ID 20240619-msm8226-cpufreq-v1-0-85143f5291d1@lucaweiss.eu (mailing list archive)
Headers show
Series Add CPU frequency scaling support for MSM8226 | expand

Message

Luca Weiss June 19, 2024, 9:02 p.m. UTC 
Apart from a bunch of bindings updates, add support for the a7pll found
on the SoC and wire up everything in the dtsi. And finally switch over
to using apcs via mbox interface to stop using the apcs via syscon.

Only a limited list of CPU frequencies are supported for now, higher
ones require speedbin support which I plan to work on after this lands.

Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
---
Luca Weiss (7):
      dt-bindings: mailbox: qcom: add compatible for MSM8226 SoC
      dt-bindings: clock: qcom,a53pll: Allow opp-table subnode
      dt-bindings: clock: qcom,a53pll: Add msm8226-a7pll compatible
      clk: qcom: a53-pll: Add MSM8226 a7pll support
      ARM: dts: qcom: msm8226: Add CPU frequency scaling support
      ARM: dts: qcom: msm8226: Hook up CPU cooling
      ARM: dts: qcom: msm8226: Convert APCS usages to mbox interface

 .../devicetree/bindings/clock/qcom,a53pll.yaml     |   4 +
 .../bindings/mailbox/qcom,apcs-kpss-global.yaml    |   1 +
 arch/arm/boot/dts/qcom/qcom-msm8226.dtsi           | 134 ++++++++++++++++++++-
 drivers/clk/qcom/a53-pll.c                         |   1 +
 4 files changed, 134 insertions(+), 6 deletions(-)
---
base-commit: 0efa3123a1658dbafdace0bfcdcc4f34eebc7f9f
change-id: 20240619-msm8226-cpufreq-788b0bf0256a

Best regards,