mbox series

[0/7] qrb4210-rb2: add HDMI audio playback support

Message ID 20240628010715.438471-1-alexey.klimov@linaro.org (mailing list archive)
Headers show
Series qrb4210-rb2: add HDMI audio playback support | expand

Message

Alexey Klimov June 28, 2024, 1:07 a.m. UTC
First time I am doing anything like this. This series adds
mising pieces here and there to allow addition of sensible
sound card in qrb4210-rb2.dts and enable HDMI audio playback there.

It is planned in future to add support for other outputs and capture --
analog audio support.

The series depends on Srini's sm4250 lpi pinctrl driver:
c2e5a25e8d88 (pinctrl: qcom: Introduce SM4250 LPI pinctrl driver, 2024-06-22)
2ffa7a354662 (dt-bindings: pinctrl: qcom: Add SM4250 pinctrl, 2024-06-22)
As far as I understood it was already accepted and will go through pinctrl tree.

Alexey Klimov (7):
  ASoC: dt-bindings: qcom,sm8250: add qrb4210-rb2-sndcard
  ASoC: qcom: sm8250: add qrb4210-rb2-sndcard compatible string
  ASoC: qcom: sm8250: add handling of secondary MI2S clock
  arm64: dts: qcom: sm6115: add apr, its services and simple sound node
  arm64: dts: qcom: sm6115: add LPASS LPI pin controller
  arm64: dts: qcom: sm6115: add description of lpi_i2s2 pins
  arm64: dts: qcom: qrb4210-rb2: add HDMI audio playback support

 .../bindings/sound/qcom,sm8250.yaml           |   1 +
 arch/arm64/boot/dts/qcom/qrb4210-rb2.dts      |  73 ++++++++++++
 arch/arm64/boot/dts/qcom/sm6115.dtsi          | 112 ++++++++++++++++++
 sound/soc/qcom/sm8250.c                       |  19 +++
 4 files changed, 205 insertions(+)

Comments

Rob Herring (Arm) June 28, 2024, 3:41 p.m. UTC | #1
On Fri, 28 Jun 2024 02:07:08 +0100, Alexey Klimov wrote:
> First time I am doing anything like this. This series adds
> mising pieces here and there to allow addition of sensible
> sound card in qrb4210-rb2.dts and enable HDMI audio playback there.
> 
> It is planned in future to add support for other outputs and capture --
> analog audio support.
> 
> The series depends on Srini's sm4250 lpi pinctrl driver:
> c2e5a25e8d88 (pinctrl: qcom: Introduce SM4250 LPI pinctrl driver, 2024-06-22)
> 2ffa7a354662 (dt-bindings: pinctrl: qcom: Add SM4250 pinctrl, 2024-06-22)
> As far as I understood it was already accepted and will go through pinctrl tree.
> 
> Alexey Klimov (7):
>   ASoC: dt-bindings: qcom,sm8250: add qrb4210-rb2-sndcard
>   ASoC: qcom: sm8250: add qrb4210-rb2-sndcard compatible string
>   ASoC: qcom: sm8250: add handling of secondary MI2S clock
>   arm64: dts: qcom: sm6115: add apr, its services and simple sound node
>   arm64: dts: qcom: sm6115: add LPASS LPI pin controller
>   arm64: dts: qcom: sm6115: add description of lpi_i2s2 pins
>   arm64: dts: qcom: qrb4210-rb2: add HDMI audio playback support
> 
>  .../bindings/sound/qcom,sm8250.yaml           |   1 +
>  arch/arm64/boot/dts/qcom/qrb4210-rb2.dts      |  73 ++++++++++++
>  arch/arm64/boot/dts/qcom/sm6115.dtsi          | 112 ++++++++++++++++++
>  sound/soc/qcom/sm8250.c                       |  19 +++
>  4 files changed, 205 insertions(+)
> 
> --
> 2.45.2
> 
> 
> 


My bot found new DTB warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade


New warnings running 'make CHECK_DTBS=y qcom/qrb4210-rb2.dtb' for 20240628010715.438471-1-alexey.klimov@linaro.org:

arch/arm64/boot/dts/qcom/qrb4210-rb2.dtb: /soc@0/pinctrl@a7c0000: failed to match any schema with compatible: ['qcom,sm4250-lpass-lpi-pinctrl']