mbox series

[v3,0/4] arm64: dts: qcom: sc8280xp: enable WLAN and Bluetooth

Message ID 20240905122023.47251-1-brgl@bgdev.pl (mailing list archive)
Headers show
Series arm64: dts: qcom: sc8280xp: enable WLAN and Bluetooth | expand

Message

Bartosz Golaszewski Sept. 5, 2024, 12:20 p.m. UTC 
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

This correctly models the WLAN and Bluetooth modules on two boards using
the sc8280xp SoC. For the sc8280xp-crd we add the PMU, wifi and bluetooth
nodes with the correctly modelled wiring between them. For the X13s, we
rework existing nodes so that they align with the new DT bindings
contract.

v2 -> v3:
- move adding the bt-enable-gpios to the PMU on the CRD to patch 2/4
- add a patch removing the regulator-always-on property from regulators
  on X13s that no longer need it

v1 -> v2:
- fix commit message in patch 1/3
- drop drive-strength from the wlan enable pin function
- drop the calibration variant property from the wifi node of the CRD

Bartosz Golaszewski (3):
  arm64: dts: qcom: sc8280xp-crd: enable bluetooth
  arm64: dts: qcom: sc8280xp-x13s: model the PMU of the on-board wcn6855
  arm64: dts: qcom: sc8280xp-x13s: keep less regulators always-on

Konrad Dybcio (1):
  arm64: dts: qcom: sc8280xp-crd: model the PMU of the on-board wcn6855

 arch/arm64/boot/dts/qcom/sc8280xp-crd.dts     | 166 ++++++++++++++++++
 .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts    | 102 +++++++++--
 2 files changed, 252 insertions(+), 16 deletions(-)