mbox series

[v2,0/5] Enable ethernet for qcs8300

Message ID 20241017102728.2844274-1-quic_yijiyang@quicinc.com (mailing list archive)
Headers show
Series Enable ethernet for qcs8300 | expand

Message

YijieYang Oct. 17, 2024, 10:27 a.m. UTC 
From: Yijie Yang <quic_yijiyang@quicinc.com>

Add dts nodes to enable ethernet interface on qcs8300-ride and
Rev 2 platforms.
The EMAC, SerDes and EPHY version are the same as those in sa8775p.

Signed-off-by: Yijie Yang <quic_yijiyang@quicinc.com>
---
This patch series depends on below patch series:
https://lore.kernel.org/all/20240925-qcs8300_initial_dtsi-v2-0-494c40fa2a42@quicinc.com/
https://lore.kernel.org/all/20241010-schema-v1-0-98b2d0a2f7a2@quicinc.com/

Changes in v2:
- Detect rename and rewrite of changes, and break down changes for easier understanding
- Document the difference between qcs8300 ride and revision 2 in commit message
- Link to v1: https://lore.kernel.org/r/20241010-dts_qcs8300-v1-0-bf5acf05830b@quicinc.com

Yijie Yang (5):
  dt-bindings: arm: qcom: add qcs8300-ride Rev 2
  arm64: dts: qcom: qcs8300: add the first 1Gb ethernet
  arm64: dts: qcom: qcs8300-ride: enable ethernet0
  arm64: dts: qcom: move common parts for qcs8300-ride variants into a
    .dtsi
  arm64: dts: qcom: qcs8300-ride-r2: add new board file

 .../devicetree/bindings/arm/qcom.yaml         |   1 +
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 arch/arm64/boot/dts/qcom/qcs8300-ride-r2.dts  |  33 ++
 arch/arm64/boot/dts/qcom/qcs8300-ride.dts     | 299 ++----------------
 .../{qcs8300-ride.dts => qcs8300-ride.dtsi}   | 107 ++++++-
 arch/arm64/boot/dts/qcom/qcs8300.dtsi         |  43 +++
 6 files changed, 212 insertions(+), 272 deletions(-)
 create mode 100644 arch/arm64/boot/dts/qcom/qcs8300-ride-r2.dts
 rewrite arch/arm64/boot/dts/qcom/qcs8300-ride.dts (95%)
 copy arch/arm64/boot/dts/qcom/{qcs8300-ride.dts => qcs8300-ride.dtsi} (78%)


base-commit: cea5425829f77e476b03702426f6b3701299b925