mbox series

[v7,0/5] media: qcom: camss: Add sc7280 support

Message ID 20241204100003.300123-1-quic_vikramsa@quicinc.com (mailing list archive)
Headers show
Series media: qcom: camss: Add sc7280 support | expand

Message

Vikram Sharma Dec. 4, 2024, 9:59 a.m. UTC 
SC7280 is a Qualcomm SoC. This series adds support to bring up the CSIPHY,
CSID, VFE/RDI interfaces in SC7280.

SC7280 provides

- 3 x VFE, 3 RDI per VFE
- 2 x VFE Lite, 4 RDI per VFE
- 3 x CSID
- 2 x CSID Lite
- 5 x CSI PHY

The changes are verified on SC7280 qcs6490-rb3gen2 board, with attached vision mezzanine
TPG (mode 1-9) and IMX577 sensor.
The base dts for qcs6490-rb3gen2 is:
https://lore.kernel.org/all/20231103184655.23555-1-quic_kbajaj@quicinc.com/

This change is dependent on below series. As it is raised on top of
this. Please take both to validate.
https://lore.kernel.org/lkml/20241126100126.2743795-1-quic_vikramsa@quicinc.com/

Used following tools for the sanity check of these changes.

- make CHECK_DTBS=y W=1 DT_SCHEMA_FILES=media/qcom,sc7280-camss.yaml
qcom/qcs6490-rb3gen2-vision-mezzanine.dtb
- make DT_CHECKER_FLAGS=-m W=1
DT_SCHEMA_FILES=media/qcom,sc7280-camss.yaml dt_binding_check
- Smatch: make CHECK="smatch --full-path"
M=drivers/media/platform/qcom/camss/
- Sparse: make C=2 M=drivers/media/platform/qcom/camss/
- coccicheck : make coccicheck M=drivers/media/platform/qcom/camss/
- make -j32 W=1
- ./scripts/checkpatch.pl
 
Changes in V7:
- Changed unit address for camss in documention and dts.
- Added avdd-supply and dvdd-supply for sensor.
- Changed reg/clocks/interrupts name for vfe_lite and csid_lite.
- Link to v6: https://lore.kernel.org/linux-arm-msm/20241127100421.3447601-1-quic_vikramsa@quicinc.com/

Changes in V6:
- Changed order of properties in Documentation [PATCH 1/5].
- Updated description for ports in Documentaion [PATCH 1/5].
- Moved regulators from csid to csiphy [PATCH 3/5].
- Link to v5: https://lore.kernel.org/linux-arm-msm/20241112173032.2740119-1-quic_vikramsa@quicinc.com/ 

Changes in V5:
- Updated Commit text for [PATCH v5 1/6].
- Moved reg after compatible string.
- Renamed csi'x' clocks to vfe'x'_csid
- Removed [PATCH v4 4/6] and raised a seprate series for this one.
- Moved gpio states to mezzanine dtso.
- Added more clock levels to address TPG related issues.
- Renamed power-domains-names -> power-domain-names. 
- Link to v4: https://lore.kernel.org/linux-arm-msm/20241030105347.2117034-1-quic_vikramsa@quicinc.com/ 

Changes in V4:
- V3 had 8 patches and V4 is reduced to 6.
- Removed [Patch v3 2/8] as binding change is not required for dtso.
- Removed [Patch v3 3/8] as the fix is already taken care in latest
  kernel tip. 
- Updated alignment for dtsi and dt-bindings.
- Adding qcs6490-rb3gen2-vision-mezzanine as overlay. 
- Link to v3: https://lore.kernel.org/linux-arm-msm/20241011140932.1744124-1-quic_vikramsa@quicinc.com/

Changes in V3:
- Added missed subject line for cover letter of V2.
- Updated Alignment, indentation and properties order.
- edit commit text for [PATCH 02/10] and [PATCH 03/10].
- Refactor camss_link_entities.
- Removed camcc enablement changes as it already done.
- Link to v2: https://lore.kernel.org/linux-arm-msm/20240904-camss_on_sc7280_rb3gen2_vision_v2_patches-v1-0-b18ddcd7d9df@quicinc.com/

Changes in V2:
- Improved indentation/formatting.
- Removed _src clocks and misleading code comments.
- Added name fields for power domains and csid register offset in DTSI.
- Dropped minItems field from YAML file.
- Listed changes in alphabetical order.
- Updated description and commit text to reflect changes
- Changed the compatible string from imx412 to imx577.
- Added board-specific enablement changes in the newly created vision
  board DTSI file.
- Fixed bug encountered during testing.
- Moved logically independent changes to a new/seprate patch.
- Removed cci0 as no sensor is on this port and MCLK2, which was a
  copy-paste error from the RB5 board reference.
- Added power rails, referencing the RB5 board.
- Discarded Patch 5/6 completely (not required).
- Removed unused enums.
- Link to v1: https://lore.kernel.org/linux-arm-msm/20240629-camss_first_post_linux_next-v1-0-bc798edabc3a@quicinc.com/

Suresh Vankadara (1):
  media: qcom: camss: Add support for camss driver on sc7280

Vikram Sharma (4):
  media: dt-bindings: Add qcom,sc7280-camss
  media: qcom: camss: Sort camss version enums and compatible strings
  arm64: dts: qcom: sc7280: Add support for camss
  arm64: dts: qcom: qcs6490-rb3gen2-vision-mezzanine: Add vision
    mezzanine

 .../bindings/media/qcom,sc7280-camss.yaml     | 418 ++++++++++++++++++
 arch/arm64/boot/dts/qcom/Makefile             |   4 +
 .../qcs6490-rb3gen2-vision-mezzanine.dtso     | 110 +++++
 arch/arm64/boot/dts/qcom/sc7280.dtsi          | 172 +++++++
 .../qcom/camss/camss-csiphy-3ph-1-0.c         |  13 +-
 .../media/platform/qcom/camss/camss-csiphy.c  |   5 +
 .../media/platform/qcom/camss/camss-csiphy.h  |   1 +
 drivers/media/platform/qcom/camss/camss-vfe.c |   8 +-
 drivers/media/platform/qcom/camss/camss.c     | 321 +++++++++++++-
 drivers/media/platform/qcom/camss/camss.h     |   5 +-
 10 files changed, 1047 insertions(+), 10 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/media/qcom,sc7280-camss.yaml
 create mode 100644 arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-vision-mezzanine.dtso