| Message ID | 20241212-correct_gpio_ranges-v1-0-c5f20d61882f@quicinc.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | Correct the number of GPIOs in gpio-ranges for QCS615 and QCS8300 | expand |
On Thu, Dec 12, 2024 at 05:23:59PM +0800, Lijuan Gao wrote: > The UFS_RESET pin is expected to be wired to the reset pin of the > primary UFS memory, it's a general purpose output pin. Reorder it and > expose it as a gpio, so that the UFS driver can toggle it. I don't see pins being reordered. Please correct your commit messages. > > The QCS615 TLMM pin controller has GPIOs 0-122, so correct the > gpio-rangs to 124. > > The QCS8300 TLMM pin controller has GPIOs 0-132, so correct the > gpio-rangs to 134. > > Signed-off-by: Lijuan Gao <quic_lijuang@quicinc.com> > --- > Lijuan Gao (6): > dt-bindings: pinctrl: qcom: correct gpio-ranges in examples for qcs615 > dt-bindings: pinctrl: qcom: correct gpio-ranges in examples for qcs8300 > pinctrl: qcom: correct the number of ngpios for QCS615 > pinctrl: qcom: correct the number of ngpios for QCS8300 > arm64: dts: qcom: correct gpio-ranges for QCS615 > arm64: dts: qcom: correct gpio-ranges for QCS8300 > > Documentation/devicetree/bindings/pinctrl/qcom,qcs615-tlmm.yaml | 2 +- > Documentation/devicetree/bindings/pinctrl/qcom,qcs8300-tlmm.yaml | 2 +- > arch/arm64/boot/dts/qcom/qcs615.dtsi | 2 +- > arch/arm64/boot/dts/qcom/qcs8300.dtsi | 2 +- > drivers/pinctrl/qcom/pinctrl-qcs615.c | 2 +- > drivers/pinctrl/qcom/pinctrl-qcs8300.c | 2 +- > 6 files changed, 6 insertions(+), 6 deletions(-) > --- > base-commit: 91e71d606356e50f238d7a87aacdee4abc427f07 > change-id: 20241211-correct_gpio_ranges-ed8a25ad22e7 > > Best regards, > -- > Lijuan Gao <quic_lijuang@quicinc.com> >
在 12/12/2024 5:34 PM, Dmitry Baryshkov 写道: > On Thu, Dec 12, 2024 at 05:23:59PM +0800, Lijuan Gao wrote: >> The UFS_RESET pin is expected to be wired to the reset pin of the >> primary UFS memory, it's a general purpose output pin. Reorder it and >> expose it as a gpio, so that the UFS driver can toggle it. > > I don't see pins being reordered. Please correct your commit messages. > Understood, I will update the commit message in next patch, thanks! >> >> The QCS615 TLMM pin controller has GPIOs 0-122, so correct the >> gpio-rangs to 124. >> >> The QCS8300 TLMM pin controller has GPIOs 0-132, so correct the >> gpio-rangs to 134. >> >> Signed-off-by: Lijuan Gao <quic_lijuang@quicinc.com> >> --- >> Lijuan Gao (6): >> dt-bindings: pinctrl: qcom: correct gpio-ranges in examples for qcs615 >> dt-bindings: pinctrl: qcom: correct gpio-ranges in examples for qcs8300 >> pinctrl: qcom: correct the number of ngpios for QCS615 >> pinctrl: qcom: correct the number of ngpios for QCS8300 >> arm64: dts: qcom: correct gpio-ranges for QCS615 >> arm64: dts: qcom: correct gpio-ranges for QCS8300 >> >> Documentation/devicetree/bindings/pinctrl/qcom,qcs615-tlmm.yaml | 2 +- >> Documentation/devicetree/bindings/pinctrl/qcom,qcs8300-tlmm.yaml | 2 +- >> arch/arm64/boot/dts/qcom/qcs615.dtsi | 2 +- >> arch/arm64/boot/dts/qcom/qcs8300.dtsi | 2 +- >> drivers/pinctrl/qcom/pinctrl-qcs615.c | 2 +- >> drivers/pinctrl/qcom/pinctrl-qcs8300.c | 2 +- >> 6 files changed, 6 insertions(+), 6 deletions(-) >> --- >> base-commit: 91e71d606356e50f238d7a87aacdee4abc427f07 >> change-id: 20241211-correct_gpio_ranges-ed8a25ad22e7 >> >> Best regards, >> -- >> Lijuan Gao <quic_lijuang@quicinc.com> >> >
The UFS_RESET pin is expected to be wired to the reset pin of the primary UFS memory, it's a general purpose output pin. Reorder it and expose it as a gpio, so that the UFS driver can toggle it. The QCS615 TLMM pin controller has GPIOs 0-122, so correct the gpio-rangs to 124. The QCS8300 TLMM pin controller has GPIOs 0-132, so correct the gpio-rangs to 134. Signed-off-by: Lijuan Gao <quic_lijuang@quicinc.com> --- Lijuan Gao (6): dt-bindings: pinctrl: qcom: correct gpio-ranges in examples for qcs615 dt-bindings: pinctrl: qcom: correct gpio-ranges in examples for qcs8300 pinctrl: qcom: correct the number of ngpios for QCS615 pinctrl: qcom: correct the number of ngpios for QCS8300 arm64: dts: qcom: correct gpio-ranges for QCS615 arm64: dts: qcom: correct gpio-ranges for QCS8300 Documentation/devicetree/bindings/pinctrl/qcom,qcs615-tlmm.yaml | 2 +- Documentation/devicetree/bindings/pinctrl/qcom,qcs8300-tlmm.yaml | 2 +- arch/arm64/boot/dts/qcom/qcs615.dtsi | 2 +- arch/arm64/boot/dts/qcom/qcs8300.dtsi | 2 +- drivers/pinctrl/qcom/pinctrl-qcs615.c | 2 +- drivers/pinctrl/qcom/pinctrl-qcs8300.c | 2 +- 6 files changed, 6 insertions(+), 6 deletions(-) --- base-commit: 91e71d606356e50f238d7a87aacdee4abc427f07 change-id: 20241211-correct_gpio_ranges-ed8a25ad22e7 Best regards,