Show patches with: none      |   76757 patches
« 1 2 ... 541 542 543 … 767 768 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[V5,1/5] iio: adc: Convert the QCOM SPMI ADC bindings to .yaml format iio: adc: Add support for QCOM SPMI PMIC7 ADC 1 2 - --- 2020-05-22 Jishnu Prakash Superseded
[4/4] irqchip: qcom-pdc: Introduce irq_set_wake call irqchip: qcom: pdc: Introduce irq_set_wake call - - - --- 2020-05-22 Maulik Shah Superseded
[3/4] pinctrl: qcom: Add msmgpio irqchip flags irqchip: qcom: pdc: Introduce irq_set_wake call - - - --- 2020-05-22 Maulik Shah Superseded
[2/4] pinctrl: qcom: Remove irq_disable callback from msmgpio irqchip irqchip: qcom: pdc: Introduce irq_set_wake call - - - --- 2020-05-22 Maulik Shah Superseded
[1/4] gpio: gpiolib: Allow GPIO IRQs to lazy disable irqchip: qcom: pdc: Introduce irq_set_wake call - - - --- 2020-05-22 Maulik Shah Superseded
iommu: Fix group refcount in iommu_alloc_default_domain() iommu: Fix group refcount in iommu_alloc_default_domain() - - - --- 2020-05-22 Sai Prakash Ranjan New
[v3,2/2] dt-bindings: thermal: tsens: Add cold interrupt support in yaml Add cold interrupt support to tsens driver - 1 - --- 2020-05-22 Manaf Meethalavalappu Pallikunhi New
[v3,1/2] drivers: thermal: tsens: Add cold interrupt support Add cold interrupt support to tsens driver - - - --- 2020-05-22 Manaf Meethalavalappu Pallikunhi New
[v3,2/2] dt-bindings: thermal: tsens: Add cold interrupt support in yaml Add cold interrupt support to tsens driver - - - --- 2020-05-22 Manaf Meethalavalappu Pallikunhi Superseded
[v3,1/2] drivers: thermal: tsens: Add cold interrupt support Add cold interrupt support to tsens driver - - - --- 2020-05-22 Manaf Meethalavalappu Pallikunhi Superseded
nvmem: qfprom: remove incorrect write support nvmem: qfprom: remove incorrect write support - 1 - --- 2020-05-22 Srinivas Kandagatla Accepted
media: venus: vdec: Fix runtime PM imbalance in vdec_open media: venus: vdec: Fix runtime PM imbalance in vdec_open - - - --- 2020-05-22 Dinghao Liu New
arm64: defconfig: Enable SDM845 video clock controller arm64: defconfig: Enable SDM845 video clock controller - - - --- 2020-05-22 Stanimir Varbanov New
[V2,8/8] mmc: sdhci-msm: dump vendor specific registers during error [V2,1/8] dt-bindings: mmc: Add new compatible string for sm8250 target 1 - - --- 2020-05-22 Sarthak Garg Accepted
[V2,7/8] mmc: sdhci-msm: Introduce new ops to dump vendor specific registers [V2,1/8] dt-bindings: mmc: Add new compatible string for sm8250 target 1 - - --- 2020-05-22 Sarthak Garg Accepted
[V2,6/8] mmc: sdhci-msm: Read and use DLL Config property from device tree file [V2,1/8] dt-bindings: mmc: Add new compatible string for sm8250 target 1 - - --- 2020-05-22 Sarthak Garg Accepted
[V2,5/8] mmc: sdhci-msm: Update DDR_CONFIG as per device tree file [V2,1/8] dt-bindings: mmc: Add new compatible string for sm8250 target 1 - - --- 2020-05-22 Sarthak Garg Accepted
[V2,4/8] mmc: sdhci-msm: Update dll_config_3 as per HSR [V2,1/8] dt-bindings: mmc: Add new compatible string for sm8250 target 1 - - --- 2020-05-22 Sarthak Garg Accepted
[V2,3/8] mmc: host: sdhci-msm: Configure dll-user-control in dll init sequence [V2,1/8] dt-bindings: mmc: Add new compatible string for sm8250 target 1 - - --- 2020-05-22 Sarthak Garg Accepted
[V2,2/8] dt-bindings: mmc: Add information for DLL register properties [V2,1/8] dt-bindings: mmc: Add new compatible string for sm8250 target - - - --- 2020-05-22 Sarthak Garg Accepted
[V2,1/8] dt-bindings: mmc: Add new compatible string for sm8250 target [V2,1/8] dt-bindings: mmc: Add new compatible string for sm8250 target - - - --- 2020-05-22 Sarthak Garg Accepted
[5/5] iio: remove left-over parent assignments [1/5] iio: core: pass parent device as parameter during allocation - - - --- 2020-05-22 Alexandru Ardelean New
[4/5] iio: light: lm3533-als: remove explicit parent assignment [1/5] iio: core: pass parent device as parameter during allocation - - - --- 2020-05-22 Alexandru Ardelean New
[3/5] iio: remove left-over comments about parent assignment [1/5] iio: core: pass parent device as parameter during allocation - - - --- 2020-05-22 Alexandru Ardelean New
[1/5] iio: core: pass parent device as parameter during allocation [1/5] iio: core: pass parent device as parameter during allocation - - - --- 2020-05-22 Alexandru Ardelean New
[v2,3/3] bus: mhi: clients: Add user space client interface driver user space client interface driver - - - --- 2020-05-22 Hemant Kumar Superseded
[v2,2/3] bus: mhi: core: Move MHI_MAX_MTU to external header file user space client interface driver - - - --- 2020-05-22 Hemant Kumar Superseded
[v2,1/3] bus: mhi: core: Add helper API to return number of free TREs user space client interface driver - - - --- 2020-05-22 Hemant Kumar Superseded
[v2] phy: qcom-snps: Add runtime suspend and resume handlers [v2] phy: qcom-snps: Add runtime suspend and resume handlers - - - --- 2020-05-22 Wesley Cheng Superseded
[RFC] Make dynamic debug infrastructure more flexible [RFC] Make dynamic debug infrastructure more flexible - - - --- 2020-05-21 Joe Perches New
[RESEND,14/14] bus: mhi: core: Handle syserr during power_up MHI patches for v5.8 - 2 - --- 2020-05-21 Manivannan Sadhasivam Accepted
[RESEND,13/14] bus: mhi: core: Handle write lock properly in mhi_pm_m0_transition MHI patches for v5.8 - 1 - --- 2020-05-21 Manivannan Sadhasivam Accepted
[RESEND,12/14] bus: mhi: core: Do not process SYS_ERROR if RDDM is supported MHI patches for v5.8 - 2 - --- 2020-05-21 Manivannan Sadhasivam Accepted
[RESEND,11/14] bus: mhi: core: Skip handling BHI irq if MHI reg access is not allowed MHI patches for v5.8 - 2 - --- 2020-05-21 Manivannan Sadhasivam Accepted
[RESEND,10/14] bus: mhi: core: Handle disable transitions in state worker MHI patches for v5.8 - 2 - --- 2020-05-21 Manivannan Sadhasivam Accepted
[RESEND,09/14] bus: mhi: core: Remove the system error worker thread MHI patches for v5.8 - 2 - --- 2020-05-21 Manivannan Sadhasivam Accepted
[RESEND,08/14] bus: mhi: core: Ensure non-zero session or sequence ID values are used MHI patches for v5.8 - 2 - --- 2020-05-21 Manivannan Sadhasivam Accepted
[RESEND,07/14] bus: mhi: core: Improve debug logs for loading firmware MHI patches for v5.8 - 2 - --- 2020-05-21 Manivannan Sadhasivam Accepted
[RESEND,06/14] bus: mhi: core: Return appropriate error codes for AMSS load failure MHI patches for v5.8 - 2 - --- 2020-05-21 Manivannan Sadhasivam Accepted
[RESEND,05/14] bus: mhi: core: Handle firmware load using state worker MHI patches for v5.8 - 2 - --- 2020-05-21 Manivannan Sadhasivam Accepted
[RESEND,04/14] bus: mhi: core: Read transfer length from an event properly MHI patches for v5.8 - 2 - --- 2020-05-21 Manivannan Sadhasivam Accepted
[RESEND,03/14] bus: mhi: core: Add range check for channel id received in event ring MHI patches for v5.8 - 2 - --- 2020-05-21 Manivannan Sadhasivam Accepted
[RESEND,02/14] bus: mhi: core: Cache intmod from mhi event to mhi channel MHI patches for v5.8 - 2 - --- 2020-05-21 Manivannan Sadhasivam Accepted
[RESEND,01/14] bus: mhi: core: Refactor mhi queue APIs MHI patches for v5.8 - 2 - --- 2020-05-21 Manivannan Sadhasivam Accepted
[v7,2/2] dt-bindings: usb: qcom,dwc3: Add compatible for SC7180 Add USB DWC3 support for SC7180 1 2 - --- 2020-05-21 Sandeep Maheswaram New
[v7,1/2] dt-bindings: usb: qcom,dwc3: Convert USB DWC3 bindings Add USB DWC3 support for SC7180 - - - --- 2020-05-21 Sandeep Maheswaram New
[14/14] bus: mhi: core: Handle syserr during power_up MHI patches for v5.8 - 2 - --- 2020-05-21 Manivannan Sadhasivam Accepted
[13/14] bus: mhi: core: Handle write lock properly in mhi_pm_m0_transition MHI patches for v5.8 - 1 - --- 2020-05-21 Manivannan Sadhasivam Accepted
[12/14] bus: mhi: core: Do not process SYS_ERROR if RDDM is supported MHI patches for v5.8 - 2 - --- 2020-05-21 Manivannan Sadhasivam Accepted
[11/14] bus: mhi: core: Skip handling BHI irq if MHI reg access is not allowed MHI patches for v5.8 - 2 - --- 2020-05-21 Manivannan Sadhasivam Accepted
[10/14] bus: mhi: core: Handle disable transitions in state worker MHI patches for v5.8 - 2 - --- 2020-05-21 Manivannan Sadhasivam Accepted
[09/14] bus: mhi: core: Remove the system error worker thread MHI patches for v5.8 - 2 - --- 2020-05-21 Manivannan Sadhasivam Accepted
[08/14] bus: mhi: core: Ensure non-zero session or sequence ID values are used MHI patches for v5.8 - 2 - --- 2020-05-21 Manivannan Sadhasivam Accepted
[07/14] bus: mhi: core: Improve debug logs for loading firmware MHI patches for v5.8 - 2 - --- 2020-05-21 Manivannan Sadhasivam Accepted
[06/14] bus: mhi: core: Return appropriate error codes for AMSS load failure MHI patches for v5.8 - 2 - --- 2020-05-21 Manivannan Sadhasivam Accepted
[05/14] bus: mhi: core: Handle firmware load using state worker MHI patches for v5.8 - 2 - --- 2020-05-21 Manivannan Sadhasivam Accepted
[04/14] bus: mhi: core: Read transfer length from an event properly MHI patches for v5.8 - 2 - --- 2020-05-21 Manivannan Sadhasivam Accepted
[03/14] bus: mhi: core: Add range check for channel id received in event ring MHI patches for v5.8 - 2 - --- 2020-05-21 Manivannan Sadhasivam Accepted
[02/14] bus: mhi: core: Cache intmod from mhi event to mhi channel MHI patches for v5.8 - 2 - --- 2020-05-21 Manivannan Sadhasivam Accepted
[01/14] bus: mhi: core: Refactor mhi queue APIs MHI patches for v5.8 - 2 - --- 2020-05-21 Manivannan Sadhasivam Accepted
[V2,3/3] mmc: sdhci: Allow platform controlled voltage switching [V2,1/3] dt-bindings: mmc: Supply max load for mmc supplies 1 - - --- 2020-05-21 Veerabhadrarao Badiganti Superseded
[V2,2/3] mmc: sdhci-msm: Use internal voltage control [V2,1/3] dt-bindings: mmc: Supply max load for mmc supplies - - - --- 2020-05-21 Veerabhadrarao Badiganti Superseded
[V2,1/3] dt-bindings: mmc: Supply max load for mmc supplies [V2,1/3] dt-bindings: mmc: Supply max load for mmc supplies - - - --- 2020-05-21 Veerabhadrarao Badiganti Superseded
[v2,3/3] venus: Add a debugfs file for SSR trigger Venus dynamic debug - - - --- 2020-05-21 Stanimir Varbanov Superseded
[v2,2/3] venus: Make debug infrastructure more flexible Venus dynamic debug - - - --- 2020-05-21 Stanimir Varbanov Superseded
[v2,1/3] venus: Add debugfs interface to set firmware log level Venus dynamic debug - - - --- 2020-05-21 Stanimir Varbanov Superseded
media: camss: ispif: Fix runtime PM imbalance on error media: camss: ispif: Fix runtime PM imbalance on error - - - --- 2020-05-21 Dinghao Liu Accepted
media: camss: vfe: Fix runtime PM imbalance on error media: camss: vfe: Fix runtime PM imbalance on error - - - --- 2020-05-21 Dinghao Liu Accepted
net: ethernet: stmmac: Enable interface clocks on probe for IPQ806x net: ethernet: stmmac: Enable interface clocks on probe for IPQ806x - - - --- 2020-05-21 Jonathan McDowell Mainlined
[v2,3/3] dt-bindings: usb: dwc3: Add entry for tx-fifo-resize Re-introduce TX FIFO resize for larger EP bursting - 1 - --- 2020-05-21 Wesley Cheng Superseded
[v2,2/3] arm64: boot: dts: qcom: sm8150: Enable dynamic TX FIFO resize logic Re-introduce TX FIFO resize for larger EP bursting - - - --- 2020-05-21 Wesley Cheng Superseded
[v2,1/3] usb: dwc3: Resize TX FIFOs to meet EP bursting requirements Re-introduce TX FIFO resize for larger EP bursting - 1 - --- 2020-05-21 Wesley Cheng Superseded
[V6,7/7] arm64: dts: sc7180: Add interconnect for QUP and QSPI Add interconnect support to QSPI and QUP drivers - - - --- 2020-05-21 Akash Asthana Superseded
[V6,6/7] spi: spi-qcom-qspi: Add interconnect support Add interconnect support to QSPI and QUP drivers 1 - - --- 2020-05-21 Akash Asthana Superseded
[V6,5/7] tty: serial: qcom_geni_serial: Add interconnect support Add interconnect support to QSPI and QUP drivers 1 1 - --- 2020-05-21 Akash Asthana Superseded
[V6,4/7] spi: spi-geni-qcom: Add interconnect support Add interconnect support to QSPI and QUP drivers 1 1 - --- 2020-05-21 Akash Asthana Superseded
[V6,3/7] i2c: i2c-qcom-geni: Add interconnect support Add interconnect support to QSPI and QUP drivers 1 1 - --- 2020-05-21 Akash Asthana Superseded
[V6,2/7] soc: qcom-geni-se: Add interconnect support to fix earlycon crash Add interconnect support to QSPI and QUP drivers - 2 - --- 2020-05-21 Akash Asthana Superseded
[V6,1/7] soc: qcom: geni: Support for ICC voting Add interconnect support to QSPI and QUP drivers - 2 - --- 2020-05-21 Akash Asthana Superseded
[PATCHv3/RESEND,3/3] soc: qcom: rpmh-rsc: Fold WARN_ON() into if condition Even moar rpmh cleanups - 2 - --- 2020-05-21 Stephen Boyd New
[PATCHv3/RESEND,2/3] soc: qcom: rpmh-rsc: Loop over fewer bits in irq handler Even moar rpmh cleanups - 2 - --- 2020-05-21 Stephen Boyd New
[PATCHv3/RESEND,1/3] soc: qcom: rpmh-rsc: Remove tcs_is_free() API Even moar rpmh cleanups - 2 - --- 2020-05-21 Stephen Boyd New
clk: qcom: gcc: Fix parent for gpll0_out_even clk: qcom: gcc: Fix parent for gpll0_out_even - 1 - --- 2020-05-21 Vinod Koul Accepted
arm64: dts: qcom: sc7180: Move mss node to the right place arm64: dts: qcom: sc7180: Move mss node to the right place - 2 - --- 2020-05-21 Stephen Boyd Accepted
[2/2] phy: qcom-usb-hs: Add qcom,enable-vbus-pullup support phy: qcom-usb-hs: Add DT controlled VBUS pullup waggle - - - --- 2020-05-21 Bryan O'Donoghue New
[1/2] dt-bindings: phy-qcom-usb-hs-phy: Add qcom,enable-vbus-pullup phy: qcom-usb-hs: Add DT controlled VBUS pullup waggle 1 - - --- 2020-05-21 Bryan O'Donoghue New
[v4,2/2] scsi: ufs-qcom: enter and exit hibern8 during clock scaling [v4,1/2] scsi: ufs: export hibern8 entry - - - --- 2020-05-20 Asutosh Das (asd) New
[v4,1/2] scsi: ufs: export hibern8 entry [v4,1/2] scsi: ufs: export hibern8 entry - - - --- 2020-05-20 Asutosh Das (asd) New
[V6,5/5] rpmsg: glink: unregister rpmsg device during endpoint destroy [V6,1/5] rpmsg: glink: Use complete_all for open states - - - --- 2020-05-20 Arun Kumar Neelakantam New
[V6,4/5] rpmsg: glink: Expose rpmsg name attr for glink [V6,1/5] rpmsg: glink: Use complete_all for open states - - - --- 2020-05-20 Arun Kumar Neelakantam New
[V6,3/5] rpmsg: glink: Add support for rpmsg glink chrdev [V6,1/5] rpmsg: glink: Use complete_all for open states - - - --- 2020-05-20 Arun Kumar Neelakantam New
[V6,1/5] rpmsg: glink: Use complete_all for open states [V6,1/5] rpmsg: glink: Use complete_all for open states - - - --- 2020-05-20 Arun Kumar Neelakantam New
PCI: qcom: fix runtime pm imbalance on error PCI: qcom: fix runtime pm imbalance on error - - - --- 2020-05-20 Dinghao Liu New
[v3,3/3] MAINTAINERS: Add entry for Qualcomm IPCC driver Add Qualcomm IPCC driver support - 1 - --- 2020-05-20 Manivannan Sadhasivam New
[v3,2/3] mailbox: Add support for Qualcomm IPCC Add Qualcomm IPCC driver support - 1 - --- 2020-05-20 Manivannan Sadhasivam New
[v3,1/3] dt-bindings: mailbox: Add devicetree binding for Qcom IPCC Add Qualcomm IPCC driver support - 2 - --- 2020-05-20 Manivannan Sadhasivam New
[v11] arm64: dts: qcom: sc7180: Add WCN3990 WLAN module device node [v11] arm64: dts: qcom: sc7180: Add WCN3990 WLAN module device node - 2 - --- 2020-05-20 Rakesh Pillai Superseded
[v1,6/6] bus: mhi: core: Process execution environment changes serially Bug fixes and bootup and shutdown improvements - - - --- 2020-05-20 Bhaumik Bhatt New
[v1,5/6] bus: mhi: core: Introduce support for manual AMSS loading Bug fixes and bootup and shutdown improvements - - - --- 2020-05-20 Bhaumik Bhatt New
[v1,4/6] bus: mhi: core: Use common name for BHI firmware load function Bug fixes and bootup and shutdown improvements - - - --- 2020-05-20 Bhaumik Bhatt New
« 1 2 ... 541 542 543 … 767 768 »