diff mbox series

[v1,1/3] clk: qcom: clk-alpha-pll: Add support for controlling Agera PLLs

Message ID 010101746eb0276a-510c98e1-9db0-4bbb-a0f4-51e9536d68ca-000000@us-west-2.amazonses.com (mailing list archive)
State Superseded
Headers show
Series Add Camera clock controller driver for SC7180 | expand

Commit Message

Taniya Das Sept. 8, 2020, 5:07 p.m. UTC
Add programming sequence support for managing the Agera PLLs.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
---
 drivers/clk/qcom/clk-alpha-pll.c | 82 ++++++++++++++++++++++++++++++++++++++++
 drivers/clk/qcom/clk-alpha-pll.h |  4 ++
 2 files changed, 86 insertions(+)

--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the  Linux Foundation.
diff mbox series

Patch

diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
index 26139ef..fb27fcf 100644
--- a/drivers/clk/qcom/clk-alpha-pll.c
+++ b/drivers/clk/qcom/clk-alpha-pll.c
@@ -116,6 +116,16 @@  const u8 clk_alpha_pll_regs[][PLL_OFF_MAX_REGS] = {
 		[PLL_OFF_OPMODE] = 0x38,
 		[PLL_OFF_ALPHA_VAL] = 0x40,
 	},
+	[CLK_ALPHA_PLL_TYPE_AGERA] =  {
+		[PLL_OFF_L_VAL] = 0x04,
+		[PLL_OFF_ALPHA_VAL] = 0x08,
+		[PLL_OFF_USER_CTL] = 0x0c,
+		[PLL_OFF_CONFIG_CTL] = 0x10,
+		[PLL_OFF_CONFIG_CTL_U] = 0x14,
+		[PLL_OFF_TEST_CTL] = 0x18,
+		[PLL_OFF_TEST_CTL_U] = 0x1c,
+		[PLL_OFF_STATUS] = 0x2c,
+	},
 };
 EXPORT_SYMBOL_GPL(clk_alpha_pll_regs);

@@ -1561,3 +1571,75 @@  const struct clk_ops clk_alpha_pll_postdiv_lucid_ops = {
 	.set_rate = clk_alpha_pll_postdiv_fabia_set_rate,
 };
 EXPORT_SYMBOL_GPL(clk_alpha_pll_postdiv_lucid_ops);
+
+void clk_agera_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
+			const struct alpha_pll_config *config)
+{
+	if (config->l)
+		regmap_write(regmap, PLL_L_VAL(pll), config->l);
+
+	if (config->alpha)
+		regmap_write(regmap, PLL_ALPHA_VAL(pll), config->alpha);
+
+	if (config->user_ctl_val)
+		regmap_write(regmap, PLL_USER_CTL(pll), config->user_ctl_val);
+
+	if (config->config_ctl_val)
+		regmap_write(regmap, PLL_CONFIG_CTL(pll),
+						config->config_ctl_val);
+
+	if (config->config_ctl_hi_val)
+		regmap_write(regmap, PLL_CONFIG_CTL_U(pll),
+						config->config_ctl_hi_val);
+
+	if (config->test_ctl_val)
+		regmap_write(regmap, PLL_TEST_CTL(pll),
+						config->test_ctl_val);
+
+	if (config->test_ctl_hi_val)
+		regmap_write(regmap,  PLL_TEST_CTL_U(pll),
+						config->test_ctl_hi_val);
+}
+EXPORT_SYMBOL_GPL(clk_agera_pll_configure);
+
+static int alpha_pll_agera_set_rate(struct clk_hw *hw, unsigned long rate,
+							unsigned long prate)
+{
+	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
+	u32 l, alpha_width = pll_alpha_width(pll);
+	unsigned long rrate;
+	u64 a;
+
+	rrate = alpha_pll_round_rate(rate, prate, &l, &a, alpha_width);
+
+	/*
+	 * Due to limited number of bits for fractional rate programming, the
+	 * rounded up rate could be marginally higher than the requested rate.
+	 */
+	if (rrate > (rate + PLL_RATE_MARGIN) || rrate < rate) {
+		pr_err("Call set rate on the PLL with rounded rates!\n");
+		return -EINVAL;
+	}
+
+	/* change L_VAL without having to go through the power on sequence */
+	regmap_write(pll->clkr.regmap, PLL_L_VAL(pll), l);
+	regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL(pll), a);
+
+	/* Ensure that the write above goes through before proceeding. */
+	mb();
+
+	if (clk_hw_is_enabled(hw))
+		return wait_for_pll_enable_lock(pll);
+
+	return 0;
+}
+
+const struct clk_ops clk_alpha_pll_agera_ops = {
+	.enable = clk_alpha_pll_enable,
+	.disable = clk_alpha_pll_disable,
+	.is_enabled = clk_alpha_pll_is_enabled,
+	.recalc_rate = alpha_pll_fabia_recalc_rate,
+	.round_rate = clk_alpha_pll_round_rate,
+	.set_rate = alpha_pll_agera_set_rate,
+};
+EXPORT_SYMBOL_GPL(clk_alpha_pll_agera_ops);
diff --git a/drivers/clk/qcom/clk-alpha-pll.h b/drivers/clk/qcom/clk-alpha-pll.h
index d3201b8..0ea30d2 100644
--- a/drivers/clk/qcom/clk-alpha-pll.h
+++ b/drivers/clk/qcom/clk-alpha-pll.h
@@ -15,6 +15,7 @@  enum {
 	CLK_ALPHA_PLL_TYPE_FABIA,
 	CLK_ALPHA_PLL_TYPE_TRION,
 	CLK_ALPHA_PLL_TYPE_LUCID = CLK_ALPHA_PLL_TYPE_TRION,
+	CLK_ALPHA_PLL_TYPE_AGERA,
 	CLK_ALPHA_PLL_TYPE_MAX,
 };

@@ -141,6 +142,7 @@  extern const struct clk_ops clk_alpha_pll_postdiv_trion_ops;
 extern const struct clk_ops clk_alpha_pll_lucid_ops;
 #define clk_alpha_pll_fixed_lucid_ops clk_alpha_pll_fixed_trion_ops
 extern const struct clk_ops clk_alpha_pll_postdiv_lucid_ops;
+extern const struct clk_ops clk_alpha_pll_agera_ops;

 void clk_alpha_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
 			     const struct alpha_pll_config *config);
@@ -148,6 +150,8 @@  void clk_fabia_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
 				const struct alpha_pll_config *config);
 void clk_trion_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
 			     const struct alpha_pll_config *config);
+void clk_agera_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
+				const struct alpha_pll_config *config);
 #define clk_lucid_pll_configure(pll, regmap, config) \
 	clk_trion_pll_configure(pll, regmap, config)