From patchwork Fri Jul 21 04:35:28 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Varadarajan Narayanan X-Patchwork-Id: 13321336 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 8DB96EB64DD for ; Fri, 21 Jul 2023 04:37:08 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230286AbjGUEhH (ORCPT ); Fri, 21 Jul 2023 00:37:07 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:45306 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230249AbjGUEg4 (ORCPT ); Fri, 21 Jul 2023 00:36:56 -0400 Received: from mx0a-0031df01.pphosted.com (mx0a-0031df01.pphosted.com [205.220.168.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 0604F2D53; Thu, 20 Jul 2023 21:36:38 -0700 (PDT) Received: from pps.filterd (m0279865.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 36L4Aia8017058; Fri, 21 Jul 2023 04:36:09 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : subject : date : message-id : in-reply-to : references : mime-version : content-type; s=qcppdkim1; bh=rCHEV2mDgjw1NhIEC1Xs4Wq2mRyDSQx9Ia6U74mbGyU=; b=Bdh+g9HU3wblmp8p+s+zmlvK94B/Tg1GROwUMNQ+oZoKMaakPJ3HJ5li61bVOx9p3Bvf TPxs8TQZdBaQub+8YhF3mK2FfP/CjVghDX/UXUVi3Ck6z5g7BRlN9z2dydv49yXIo0R2 ChyzEfhzCq+DBbA5Ttk2RKxv+dPlHg0pT+jtcjdJaMtbdHK04KAYnesBe8VnjaAZ3mtV ywOKLuMv8D91LNi0qGuaO4869qOjTp+qjkoS/s5P4snvL2EsUfTgl0tp6fxEX4V5graD 59vyR3ICOZAMWktQ1i4eHBWVMm5pMHnM8s5H7mUMSrh5Z1aIrFfUu6VxhiP2FJFZYqhb dQ== Received: from nasanppmta03.qualcomm.com (i-global254.qualcomm.com [199.106.103.254]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3ryfyf0awd-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Fri, 21 Jul 2023 04:36:09 +0000 Received: from nasanex01a.na.qualcomm.com (nasanex01a.na.qualcomm.com [10.52.223.231]) by NASANPPMTA03.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTPS id 36L4a8rG025724 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Fri, 21 Jul 2023 04:36:08 GMT Received: from varda-linux.qualcomm.com (10.80.80.8) by nasanex01a.na.qualcomm.com (10.52.223.231) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.1118.30; Thu, 20 Jul 2023 21:36:00 -0700 From: Varadarajan Narayanan To: , , , , , , , , , , , , , , , , , , , , , , , , , Subject: [PATCH v5 3/6] phy: qcom-m31: Introduce qcom,m31 USB phy driver Date: Fri, 21 Jul 2023 10:05:28 +0530 Message-ID: <068a44b38a01740b06ea3646611c8dfdacf3f7b0.1689913334.git.quic_varada@quicinc.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: References: MIME-Version: 1.0 X-Originating-IP: [10.80.80.8] X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nasanex01a.na.qualcomm.com (10.52.223.231) X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: OP3EHA9qSjsbQBDw8LzOWuV1Bpe2VAIn X-Proofpoint-ORIG-GUID: OP3EHA9qSjsbQBDw8LzOWuV1Bpe2VAIn X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.254,Aquarius:18.0.957,Hydra:6.0.591,FMLib:17.11.176.26 definitions=2023-07-21_01,2023-07-20_01,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 mlxlogscore=999 spamscore=0 mlxscore=0 lowpriorityscore=0 bulkscore=0 phishscore=0 adultscore=0 priorityscore=1501 impostorscore=0 clxscore=1015 malwarescore=0 suspectscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2306200000 definitions=main-2307210041 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Add the M31 USB2 phy driver. Signed-off-by: Varadarajan Narayanan --- v5: Kconfig and Makefile:- place snippet according to sorted order Use generic phy instead of usb-phy Use ARRAY_SIZE for reg init instead of blank last entry Fix copyright year v4: Remove unused enum Error handling for devm_clk_get v1: Combine driver, makefile and kconfig into 1 patch Remove 'qscratch' region and its usage. The controller driver takes care of those settings Use compatible/data to handle ipq5332 init Drop the default case Get resources by index instead of name as there is only one resource Add clock Fix review comments in the driver --- drivers/phy/qualcomm/Kconfig | 11 ++ drivers/phy/qualcomm/Makefile | 1 + drivers/phy/qualcomm/phy-qcom-m31.c | 264 ++++++++++++++++++++++++++++++++++++ 3 files changed, 276 insertions(+) create mode 100644 drivers/phy/qualcomm/phy-qcom-m31.c diff --git a/drivers/phy/qualcomm/Kconfig b/drivers/phy/qualcomm/Kconfig index ced6038..d638906 100644 --- a/drivers/phy/qualcomm/Kconfig +++ b/drivers/phy/qualcomm/Kconfig @@ -143,6 +143,17 @@ config PHY_QCOM_EUSB2_REPEATER PMICs. The repeater is paired with a Synopsys eUSB2 Phy on Qualcomm SOCs. +config PHY_QCOM_M31_USB + tristate "Qualcomm M31 HS PHY driver support" + depends on (USB || USB_GADGET) && ARCH_QCOM + select USB_PHY + help + Enable this to support M31 HS PHY transceivers on Qualcomm chips + with DWC3 USB core. It handles PHY initialization, clock + management required after resetting the hardware and power + management. This driver is required even for peripheral only or + host only mode configurations. + config PHY_QCOM_USB_HS tristate "Qualcomm USB HS PHY module" depends on USB_ULPI_BUS diff --git a/drivers/phy/qualcomm/Makefile b/drivers/phy/qualcomm/Makefile index df94581..ffd609a 100644 --- a/drivers/phy/qualcomm/Makefile +++ b/drivers/phy/qualcomm/Makefile @@ -4,6 +4,7 @@ obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o obj-$(CONFIG_PHY_QCOM_EDP) += phy-qcom-edp.o obj-$(CONFIG_PHY_QCOM_IPQ4019_USB) += phy-qcom-ipq4019-usb.o obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o +obj-$(CONFIG_PHY_QCOM_M31_USB) += phy-qcom-m31.o obj-$(CONFIG_PHY_QCOM_PCIE2) += phy-qcom-pcie2.o obj-$(CONFIG_PHY_QCOM_QMP_COMBO) += phy-qcom-qmp-combo.o diff --git a/drivers/phy/qualcomm/phy-qcom-m31.c b/drivers/phy/qualcomm/phy-qcom-m31.c new file mode 100644 index 0000000..4627425 --- /dev/null +++ b/drivers/phy/qualcomm/phy-qcom-m31.c @@ -0,0 +1,264 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (c) 2014-2016, 2020-2023, The Linux Foundation. All rights reserved. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define USB2PHY_PORT_UTMI_CTRL1 0x40 + +#define USB2PHY_PORT_UTMI_CTRL2 0x44 + #define UTMI_ULPI_SEL BIT(7) + #define UTMI_TEST_MUX_SEL BIT(6) + +#define HS_PHY_CTRL_REG 0x10 + #define UTMI_OTG_VBUS_VALID BIT(20) + #define SW_SESSVLD_SEL BIT(28) + +#define USB_PHY_UTMI_CTRL0 0x3c + +#define USB_PHY_UTMI_CTRL5 0x50 + #define POR_EN BIT(1) + +#define USB_PHY_HS_PHY_CTRL_COMMON0 0x54 + #define COMMONONN BIT(7) + #define FSEL BIT(4) + #define RETENABLEN BIT(3) + #define FREQ_24MHZ (GENMASK(6, 6) | GENMASK(4, 4)) + +#define USB_PHY_HS_PHY_CTRL2 0x64 + #define USB2_SUSPEND_N_SEL BIT(3) + #define USB2_SUSPEND_N BIT(2) + #define USB2_UTMI_CLK_EN BIT(1) + +#define USB_PHY_CFG0 0x94 + #define UTMI_PHY_OVERRIDE_EN BIT(1) + +#define USB_PHY_REFCLK_CTRL 0xa0 + #define CLKCORE BIT(1) + +#define USB2PHY_PORT_POWERDOWN 0xa4 + #define POWER_UP BIT(0) + #define POWER_DOWN 0 + +#define USB_PHY_FSEL_SEL 0xb8 + #define FREQ_SEL BIT(0) + +#define USB2PHY_USB_PHY_M31_XCFGI_1 0xbc + #define USB2_0_TX_ENABLE BIT(2) + +#define USB2PHY_USB_PHY_M31_XCFGI_4 0xc8 + #define HSTX_SLEW_RATE_565PS GENMASK(1, 0) + #define PLL_CHARGING_PUMP_CURRENT_35UA GENMASK(4, 3) + #define ODT_VALUE_38_02_OHM GENMASK(7, 6) + +#define USB2PHY_USB_PHY_M31_XCFGI_5 0xcc + #define ODT_VALUE_45_02_OHM BIT(2) + #define HSTX_PRE_EMPHASIS_LEVEL_0_55MA BIT(0) + +#define USB2PHY_USB_PHY_M31_XCFGI_11 0xe4 + #define XCFG_COARSE_TUNE_NUM BIT(1) + #define XCFG_FINE_TUNE_NUM BIT(3) + +struct m31_phy_regs { + u32 off; + u32 val; + u32 delay; +}; + +struct m31_priv_data { + bool ulpi_mode; + const struct m31_phy_regs *regs; + const int nregs; +}; + +#define M31_REG(__o, __v, __d) \ + { .off = __o, .val = __v, .delay = __d } + +struct m31_phy_regs m31_ipq5332_regs[] = { + M31_REG(USB_PHY_CFG0, UTMI_PHY_OVERRIDE_EN, 0), + M31_REG(USB_PHY_UTMI_CTRL5, POR_EN, 15), + M31_REG(USB_PHY_FSEL_SEL, FREQ_SEL, 0), + M31_REG(USB_PHY_HS_PHY_CTRL_COMMON0, + COMMONONN | FREQ_24MHZ | RETENABLEN, 0), + M31_REG(USB_PHY_UTMI_CTRL5, POR_EN, 0), + M31_REG(USB_PHY_HS_PHY_CTRL2, + USB2_SUSPEND_N_SEL | USB2_SUSPEND_N | USB2_UTMI_CLK_EN, 0), + M31_REG(USB2PHY_USB_PHY_M31_XCFGI_11, + XCFG_COARSE_TUNE_NUM | XCFG_FINE_TUNE_NUM, 0), + M31_REG(USB2PHY_USB_PHY_M31_XCFGI_4, + HSTX_SLEW_RATE_565PS | PLL_CHARGING_PUMP_CURRENT_35UA | + ODT_VALUE_38_02_OHM, 0), + M31_REG(USB2PHY_USB_PHY_M31_XCFGI_1, USB2_0_TX_ENABLE, 0), + M31_REG(USB2PHY_USB_PHY_M31_XCFGI_5, + ODT_VALUE_45_02_OHM | HSTX_PRE_EMPHASIS_LEVEL_0_55MA, 4), + M31_REG(USB_PHY_UTMI_CTRL5, 0x0, 0), + M31_REG(USB_PHY_HS_PHY_CTRL2, USB2_SUSPEND_N | USB2_UTMI_CLK_EN, 0), +}; + +struct m31usb_phy { + struct phy *phy; + void __iomem *base; + const struct m31_phy_regs *regs; + int nregs; + + struct clk *cfg_ahb_clk; + struct reset_control *phy_reset; + + bool cable_connected; + bool suspended; + bool ulpi_mode; +}; + +static void m31usb_phy_enable_clock(struct m31usb_phy *qphy) +{ + const struct m31_phy_regs *regs = qphy->regs; + int i; + + for (i = 0; i < qphy->nregs; i++) { + writel(regs[i].val, qphy->base + regs[i].off); + if (regs[i].delay) + udelay(regs[i].delay); + } +} + +static int m31usb_phy_init(struct phy *phy) +{ + int ret; + struct m31usb_phy *qphy = phy_get_drvdata(phy); + + ret = clk_prepare_enable(qphy->cfg_ahb_clk); + if (ret) { + dev_err(&phy->dev, "failed to enable cfg ahb clock, %d\n", ret); + return ret; + } + + /* Perform phy reset */ + reset_control_assert(qphy->phy_reset); + udelay(5); + reset_control_deassert(qphy->phy_reset); + + /* configure for ULPI mode if requested */ + if (qphy->ulpi_mode) + writel(0x0, qphy->base + USB2PHY_PORT_UTMI_CTRL2); + + /* Enable the PHY */ + writel(POWER_UP, qphy->base + USB2PHY_PORT_POWERDOWN); + + /* Make sure above write completed */ + wmb(); + + /* Turn on phy ref clock */ + m31usb_phy_enable_clock(qphy); + + return 0; +} + +static int m31usb_phy_shutdown(struct phy *phy) +{ + struct m31usb_phy *qphy = phy_get_drvdata(phy); + + /* Disable the PHY */ + writel_relaxed(POWER_DOWN, qphy->base + USB2PHY_PORT_POWERDOWN); + /* Make sure above write completed */ + wmb(); + + clk_disable_unprepare(qphy->cfg_ahb_clk); + + return 0; +} + +static const struct phy_ops m31usb_phy_gen_ops = { + .power_on = m31usb_phy_init, + .power_off = m31usb_phy_shutdown, + .owner = THIS_MODULE, +}; + +static int m31usb_phy_probe(struct platform_device *pdev) +{ + const struct m31_priv_data *data; + struct device *dev = &pdev->dev; + struct m31usb_phy *qphy; + struct phy_provider *phy_provider; + int ret; + + qphy = devm_kzalloc(dev, sizeof(*qphy), GFP_KERNEL); + if (!qphy) + return -ENOMEM; + + qphy->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(qphy->base)) + return PTR_ERR(qphy->base); + + qphy->phy_reset = devm_reset_control_get_exclusive_by_index(dev, 0); + if (IS_ERR(qphy->phy_reset)) + return PTR_ERR(qphy->phy_reset); + + qphy->cfg_ahb_clk = devm_clk_get(dev, "cfg_ahb"); + if (IS_ERR(qphy->cfg_ahb_clk)) { + ret = PTR_ERR(qphy->cfg_ahb_clk); + dev_err(dev, "failed to get cfg_ahb clock, %d\n", ret); + return ret; + } + + platform_set_drvdata(pdev, qphy); + + data = of_device_get_match_data(dev); + qphy->regs = data->regs; + qphy->nregs = data->nregs; + qphy->ulpi_mode = data->ulpi_mode; + + qphy->phy = devm_phy_create(dev, NULL, &m31usb_phy_gen_ops); + if (IS_ERR(qphy->phy)) { + ret = PTR_ERR(qphy->phy); + dev_err(dev, "failed to create phy, %d\n", ret); + qphy->phy = NULL; + return ret; + } + + dev_set_drvdata(dev, qphy); + phy_set_drvdata(qphy->phy, qphy); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (!IS_ERR(phy_provider)) + dev_info(dev, "Registered M31 USB phy\n"); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static const struct m31_priv_data m31_ipq5332_data = { + .ulpi_mode = false, + .regs = m31_ipq5332_regs, + .nregs = ARRAY_SIZE(m31_ipq5332_regs), +}; + +static const struct of_device_id m31usb_phy_id_table[] = { + { .compatible = "qcom,ipq5332-usb-hsphy", .data = &m31_ipq5332_data }, + { }, +}; +MODULE_DEVICE_TABLE(of, m31usb_phy_id_table); + +static struct platform_driver m31usb_phy_driver = { + .probe = m31usb_phy_probe, + .driver = { + .name = "qcom-m31usb-phy", + .of_match_table = m31usb_phy_id_table, + }, +}; + +module_platform_driver(m31usb_phy_driver); + +MODULE_DESCRIPTION("USB2 Qualcomm M31 HSPHY driver"); +MODULE_LICENSE("GPL");