diff mbox series

[v4,01/15] drivers: thermal: tsens: Get rid of id field in tsens_sensor

Message ID 0ada60b1b216346e3e9e2429af8c2b7c9901c938.1569015835.git.amit.kucheria@linaro.org (mailing list archive)
State Superseded
Headers show
Series thermal: qcom: tsens: Add interrupt support | expand

Commit Message

Amit Kucheria Sept. 20, 2019, 9:52 p.m. UTC
There are two fields - id and hw_id - to track what sensor an action was
to performed on. This was because the sensors connected to a TSENS IP
might not be contiguous i.e. 1, 2, 4, 5 with 3 being skipped.

This causes confusion in the code which uses hw_id sometimes and id
other times (tsens_get_temp, tsens_get_trend).

Switch to only using the hw_id field to track the physical ID of the
sensor. When we iterate through all the sensors connected to an IP
block, we use an index i to loop through the list of sensors, and then
return the actual hw_id that is registered on that index.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/thermal/qcom/tsens-8960.c   |  4 ++--
 drivers/thermal/qcom/tsens-common.c | 16 +++++++++-------
 drivers/thermal/qcom/tsens.c        | 11 +++++------
 drivers/thermal/qcom/tsens.h        | 10 ++++------
 4 files changed, 20 insertions(+), 21 deletions(-)
diff mbox series

Patch

diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c
index 8d9b721dadb6..3e1436fda1eb 100644
--- a/drivers/thermal/qcom/tsens-8960.c
+++ b/drivers/thermal/qcom/tsens-8960.c
@@ -243,11 +243,11 @@  static inline int code_to_mdegC(u32 adc_code, const struct tsens_sensor *s)
 	return adc_code * slope + offset;
 }
 
-static int get_temp_8960(struct tsens_priv *priv, int id, int *temp)
+static int get_temp_8960(struct tsens_sensor *s, int *temp)
 {
 	int ret;
 	u32 code, trdy;
-	const struct tsens_sensor *s = &priv->sensor[id];
+	struct tsens_priv *priv = s->priv;
 	unsigned long timeout;
 
 	timeout = jiffies + usecs_to_jiffies(TIMEOUT_US);
diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c
index 528df8801254..c037bdf92c66 100644
--- a/drivers/thermal/qcom/tsens-common.c
+++ b/drivers/thermal/qcom/tsens-common.c
@@ -83,11 +83,12 @@  static inline int code_to_degc(u32 adc_code, const struct tsens_sensor *s)
 	return degc;
 }
 
-int get_temp_tsens_valid(struct tsens_priv *priv, int i, int *temp)
+int get_temp_tsens_valid(struct tsens_sensor *s, int *temp)
 {
-	struct tsens_sensor *s = &priv->sensor[i];
-	u32 temp_idx = LAST_TEMP_0 + s->hw_id;
-	u32 valid_idx = VALID_0 + s->hw_id;
+	struct tsens_priv *priv = s->priv;
+	int hw_id = s->hw_id;
+	u32 temp_idx = LAST_TEMP_0 + hw_id;
+	u32 valid_idx = VALID_0 + hw_id;
 	u32 last_temp = 0, valid, mask;
 	int ret;
 
@@ -123,12 +124,13 @@  int get_temp_tsens_valid(struct tsens_priv *priv, int i, int *temp)
 	return 0;
 }
 
-int get_temp_common(struct tsens_priv *priv, int i, int *temp)
+int get_temp_common(struct tsens_sensor *s, int *temp)
 {
-	struct tsens_sensor *s = &priv->sensor[i];
+	struct tsens_priv *priv = s->priv;
+	int hw_id = s->hw_id;
 	int last_temp = 0, ret;
 
-	ret = regmap_field_read(priv->rf[LAST_TEMP_0 + s->hw_id], &last_temp);
+	ret = regmap_field_read(priv->rf[LAST_TEMP_0 + hw_id], &last_temp);
 	if (ret)
 		return ret;
 
diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index 0627d8615c30..6ed687a6e53c 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -14,19 +14,19 @@ 
 
 static int tsens_get_temp(void *data, int *temp)
 {
-	const struct tsens_sensor *s = data;
+	struct tsens_sensor *s = data;
 	struct tsens_priv *priv = s->priv;
 
-	return priv->ops->get_temp(priv, s->id, temp);
+	return priv->ops->get_temp(s, temp);
 }
 
 static int tsens_get_trend(void *data, int trip, enum thermal_trend *trend)
 {
-	const struct tsens_sensor *s = data;
+	struct tsens_sensor *s = data;
 	struct tsens_priv *priv = s->priv;
 
 	if (priv->ops->get_trend)
-		return priv->ops->get_trend(priv, s->id, trend);
+		return priv->ops->get_trend(s, trend);
 
 	return -ENOTSUPP;
 }
@@ -86,8 +86,7 @@  static int tsens_register(struct tsens_priv *priv)
 
 	for (i = 0;  i < priv->num_sensors; i++) {
 		priv->sensor[i].priv = priv;
-		priv->sensor[i].id = i;
-		tzd = devm_thermal_zone_of_sensor_register(priv->dev, i,
+		tzd = devm_thermal_zone_of_sensor_register(priv->dev, priv->sensor[i].hw_id,
 							   &priv->sensor[i],
 							   &tsens_of_ops);
 		if (IS_ERR(tzd))
diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
index 2fd94997245b..d022e726d074 100644
--- a/drivers/thermal/qcom/tsens.h
+++ b/drivers/thermal/qcom/tsens.h
@@ -31,7 +31,6 @@  enum tsens_ver {
  * @priv: tsens device instance that this sensor is connected to
  * @tzd: pointer to the thermal zone that this sensor is in
  * @offset: offset of temperature adjustment curve
- * @id: Sensor ID
  * @hw_id: HW ID can be used in case of platform-specific IDs
  * @slope: slope of temperature adjustment curve
  * @status: 8960-specific variable to track 8960 and 8660 status register offset
@@ -40,7 +39,6 @@  struct tsens_sensor {
 	struct tsens_priv		*priv;
 	struct thermal_zone_device	*tzd;
 	int				offset;
-	unsigned int			id;
 	unsigned int			hw_id;
 	int				slope;
 	u32				status;
@@ -61,13 +59,13 @@  struct tsens_ops {
 	/* mandatory callbacks */
 	int (*init)(struct tsens_priv *priv);
 	int (*calibrate)(struct tsens_priv *priv);
-	int (*get_temp)(struct tsens_priv *priv, int i, int *temp);
+	int (*get_temp)(struct tsens_sensor *s, int *temp);
 	/* optional callbacks */
 	int (*enable)(struct tsens_priv *priv, int i);
 	void (*disable)(struct tsens_priv *priv);
 	int (*suspend)(struct tsens_priv *priv);
 	int (*resume)(struct tsens_priv *priv);
-	int (*get_trend)(struct tsens_priv *priv, int i, enum thermal_trend *trend);
+	int (*get_trend)(struct tsens_sensor *s, enum thermal_trend *trend);
 };
 
 #define REG_FIELD_FOR_EACH_SENSOR11(_name, _offset, _startbit, _stopbit) \
@@ -313,8 +311,8 @@  struct tsens_priv {
 char *qfprom_read(struct device *dev, const char *cname);
 void compute_intercept_slope(struct tsens_priv *priv, u32 *pt1, u32 *pt2, u32 mode);
 int init_common(struct tsens_priv *priv);
-int get_temp_tsens_valid(struct tsens_priv *priv, int i, int *temp);
-int get_temp_common(struct tsens_priv *priv, int i, int *temp);
+int get_temp_tsens_valid(struct tsens_sensor *s, int *temp);
+int get_temp_common(struct tsens_sensor *s, int *temp);
 
 /* TSENS target */
 extern const struct tsens_plat_data data_8960;