diff mbox series

[v1,1/3] dt-bindings: thermal: tsens: Make dtbs_check pass for sc7180 tsens

Message ID 0f506cfdd8eb9d50b5eb43c9dca510284ac8ded1.1582615616.git.amit.kucheria@linaro.org (mailing list archive)
State Superseded
Headers show
Series Cleanup dtbs_check warnings for tsens | expand

Commit Message

Amit Kucheria Feb. 25, 2020, 7:31 a.m. UTC
Fixes the following warnings:
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c263000: compatible: ['qcom,sc7180-tsens',
'qcom,tsens-v2'] is not valid under any of the given schemas (Possible
causes of the failure):
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c263000: compatible:0: 'qcom,sc7180-tsens' is not one of
['qcom,msm8916-tsens', 'qcom,msm8974-tsens']
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c263000: compatible:0: 'qcom,sc7180-tsens' is not one of
['qcom,msm8976-tsens', 'qcom,qcs404-tsens']
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c263000: compatible:0: 'qcom,sc7180-tsens' is not one of
['qcom,msm8996-tsens', 'qcom,msm8998-tsens', 'qcom,sdm845-tsens']
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c263000: compatible:1: 'qcom,tsens-v0_1' was expected
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c263000: compatible:1: 'qcom,tsens-v1' was expected

builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c265000: compatible: ['qcom,sc7180-tsens',
'qcom,tsens-v2'] is not valid under any of the given schemas (Possible
causes of the failure):
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c265000: compatible:0: 'qcom,sc7180-tsens' is not one of
['qcom,msm8916-tsens', 'qcom,msm8974-tsens']
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c265000: compatible:0: 'qcom,sc7180-tsens' is not one of
['qcom,msm8976-tsens', 'qcom,qcs404-tsens']
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c265000: compatible:0: 'qcom,sc7180-tsens' is not one of
['qcom,msm8996-tsens', 'qcom,msm8998-tsens', 'qcom,sdm845-tsens']
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c265000: compatible:1: 'qcom,tsens-v0_1' was expected
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c265000: compatible:1: 'qcom,tsens-v1' was expected

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
---
 Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 1 +
 1 file changed, 1 insertion(+)

Comments

Vinod Koul Feb. 25, 2020, 10:16 a.m. UTC | #1
On 25-02-20, 13:01, Amit Kucheria wrote:
> Fixes the following warnings:
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c263000: compatible: ['qcom,sc7180-tsens',
> 'qcom,tsens-v2'] is not valid under any of the given schemas (Possible
> causes of the failure):
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c263000: compatible:0: 'qcom,sc7180-tsens' is not one of
> ['qcom,msm8916-tsens', 'qcom,msm8974-tsens']
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c263000: compatible:0: 'qcom,sc7180-tsens' is not one of
> ['qcom,msm8976-tsens', 'qcom,qcs404-tsens']
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c263000: compatible:0: 'qcom,sc7180-tsens' is not one of
> ['qcom,msm8996-tsens', 'qcom,msm8998-tsens', 'qcom,sdm845-tsens']
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c263000: compatible:1: 'qcom,tsens-v0_1' was expected
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c263000: compatible:1: 'qcom,tsens-v1' was expected

I think the patch title should be "add qcom,sc7180-tsens to  qcom-tsens.yaml"

and it would be great to see explanation on how adding it fixes these
warns.

Relooking at series I think this applies to rest of the series too :)

Thanks


> 
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c265000: compatible: ['qcom,sc7180-tsens',
> 'qcom,tsens-v2'] is not valid under any of the given schemas (Possible
> causes of the failure):
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c265000: compatible:0: 'qcom,sc7180-tsens' is not one of
> ['qcom,msm8916-tsens', 'qcom,msm8974-tsens']
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c265000: compatible:0: 'qcom,sc7180-tsens' is not one of
> ['qcom,msm8976-tsens', 'qcom,qcs404-tsens']
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c265000: compatible:0: 'qcom,sc7180-tsens' is not one of
> ['qcom,msm8996-tsens', 'qcom,msm8998-tsens', 'qcom,sdm845-tsens']
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c265000: compatible:1: 'qcom,tsens-v0_1' was expected
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c265000: compatible:1: 'qcom,tsens-v1' was expected
> 
> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> ---
>  Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> index eef13b9446a8..13e294328932 100644
> --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> @@ -39,6 +39,7 @@ properties:
>                - qcom,msm8996-tsens
>                - qcom,msm8998-tsens
>                - qcom,sdm845-tsens
> +              - qcom,sc7180-tsens
>            - const: qcom,tsens-v2
>  
>    reg:
> -- 
> 2.20.1
Amit Kucheria Feb. 25, 2020, 12:06 p.m. UTC | #2
On Tue, Feb 25, 2020 at 3:46 PM Vinod Koul <vkoul@kernel.org> wrote:
>
> On 25-02-20, 13:01, Amit Kucheria wrote:
> > Fixes the following warnings:
> > builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> > thermal-sensor@c263000: compatible: ['qcom,sc7180-tsens',
> > 'qcom,tsens-v2'] is not valid under any of the given schemas (Possible
> > causes of the failure):
> > builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> > thermal-sensor@c263000: compatible:0: 'qcom,sc7180-tsens' is not one of
> > ['qcom,msm8916-tsens', 'qcom,msm8974-tsens']
> > builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> > thermal-sensor@c263000: compatible:0: 'qcom,sc7180-tsens' is not one of
> > ['qcom,msm8976-tsens', 'qcom,qcs404-tsens']
> > builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> > thermal-sensor@c263000: compatible:0: 'qcom,sc7180-tsens' is not one of
> > ['qcom,msm8996-tsens', 'qcom,msm8998-tsens', 'qcom,sdm845-tsens']
> > builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> > thermal-sensor@c263000: compatible:1: 'qcom,tsens-v0_1' was expected
> > builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> > thermal-sensor@c263000: compatible:1: 'qcom,tsens-v1' was expected
>
> I think the patch title should be "add qcom,sc7180-tsens to  qcom-tsens.yaml"
>
> and it would be great to see explanation on how adding it fixes these
> warns.

Agreed. I'll send out a new version with the commit messages fixed.

> Relooking at series I think this applies to rest of the series too :)
>

Thanks for the review.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index eef13b9446a8..13e294328932 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -39,6 +39,7 @@  properties:
               - qcom,msm8996-tsens
               - qcom,msm8998-tsens
               - qcom,sdm845-tsens
+              - qcom,sc7180-tsens
           - const: qcom,tsens-v2
 
   reg: