diff mbox

[2/2] USB: ehci-msm: Add device tree support and binding information

Message ID 1381491970-22896-2-git-send-email-iivanov@mm-sol.com (mailing list archive)
State Not Applicable, archived
Headers show

Commit Message

Ivan T. Ivanov Oct. 11, 2013, 11:46 a.m. UTC
From: "Ivan T. Ivanov" <iivanov@mm-sol.com>

Allows MSM EHCI controller to be specified via device tree.

Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
---
 .../devicetree/bindings/usb/msm-hsusb.txt          |   17 +++++++++++++++++
 drivers/usb/host/ehci-msm.c                        |   15 +++++++++++++--
 2 files changed, 30 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/usb/msm-hsusb.txt

Comments

David Brown Oct. 11, 2013, 2:06 p.m. UTC | #1
On Fri, Oct 11, 2013 at 02:46:10PM +0300, Ivan T. Ivanov wrote:
>From: "Ivan T. Ivanov" <iivanov@mm-sol.com>
>
>Allows MSM EHCI controller to be specified via device tree.
>
>Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
>---
> .../devicetree/bindings/usb/msm-hsusb.txt          |   17 +++++++++++++++++
> drivers/usb/host/ehci-msm.c                        |   15 +++++++++++++--

Acked-by: David Brown <davidb@codeaurora.org>
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/usb/msm-hsusb.txt b/Documentation/devicetree/bindings/usb/msm-hsusb.txt
new file mode 100644
index 0000000..5ea26c6
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/msm-hsusb.txt
@@ -0,0 +1,17 @@ 
+MSM SoC HSUSB controllers
+
+EHCI
+
+Required properties:
+- compatible:	Should contain "qcom,ehci-host"
+- regs:			offset and length of the register set in the memory map
+- usb-phy:		phandle for the PHY device
+
+Example EHCI controller device node:
+
+	ehci: ehci@f9a55000 {
+		compatible = "qcom,ehci-host";
+		reg = <0xf9a55000 0x400>;
+		usb-phy = <&usb_otg>;
+	};
+
diff --git a/drivers/usb/host/ehci-msm.c b/drivers/usb/host/ehci-msm.c
index 1bc9355..f341651 100644
--- a/drivers/usb/host/ehci-msm.c
+++ b/drivers/usb/host/ehci-msm.c
@@ -108,10 +108,14 @@  static int ehci_msm_probe(struct platform_device *pdev)
 	 * powering up VBUS, mapping of registers address space and power
 	 * management.
 	 */
-	phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2);
+	if (pdev->dev.of_node)
+		phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0);
+	else
+		phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2);
+
 	if (IS_ERR(phy)) {
 		dev_err(&pdev->dev, "unable to find transceiver\n");
-		ret = -ENODEV;
+		ret = -EPROBE_DEFER;
 		goto put_hcd;
 	}
 
@@ -187,12 +191,19 @@  static const struct dev_pm_ops ehci_msm_dev_pm_ops = {
 	.resume          = ehci_msm_pm_resume,
 };
 
+static struct of_device_id msm_ehci_dt_match[] = {
+	{ .compatible = "qcom,ehci-host", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, msm_ehci_dt_match);
+
 static struct platform_driver ehci_msm_driver = {
 	.probe	= ehci_msm_probe,
 	.remove	= ehci_msm_remove,
 	.driver = {
 		   .name = "msm_hsusb_host",
 		   .pm = &ehci_msm_dev_pm_ops,
+		   .of_match_table = msm_ehci_dt_match,
 	},
 };