diff mbox

[1/6] rtc: pm8xxx: fixup checkpatch/style issues

Message ID 1394047776-13827-2-git-send-email-joshc@codeaurora.org (mailing list archive)
State Superseded, archived
Headers show

Commit Message

Josh Cartwright March 5, 2014, 7:29 p.m. UTC
Before performing additional cleanups to this driver, do the easy
cleanups first.

Signed-off-by: Josh Cartwright <joshc@codeaurora.org>
---
 drivers/rtc/rtc-pm8xxx.c | 88 +++++++++++++++++++++++++-----------------------
 1 file changed, 45 insertions(+), 43 deletions(-)

Comments

Stephen Boyd March 5, 2014, 9:02 p.m. UTC | #1
On 03/05/14 11:29, Josh Cartwright wrote:
> Before performing additional cleanups to this driver, do the easy
> cleanups first.
>
> Signed-off-by: Josh Cartwright <joshc@codeaurora.org>

Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>

> @@ -253,7 +253,7 @@ static int pm8xxx_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
>  
>  	ctrl_reg = rtc_dd->ctrl_reg;
>  	ctrl_reg = alarm->enabled ? (ctrl_reg | PM8xxx_RTC_ALARM_ENABLE) :
> -					(ctrl_reg & ~PM8xxx_RTC_ALARM_ENABLE);
> +				    (ctrl_reg & ~PM8xxx_RTC_ALARM_ENABLE);
>  
>  	rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base, 1);
>  	if (rc < 0) {

This could be better style with more lines:

if (alarm->enabled)
    ctrl_reg |= PM8xxx_RTC_ALARM_ENABLE;
else
    ctrl_reg &= ~PM8xxx_RTC_ALARM_ENABLE;
Joe Perches March 5, 2014, 9:54 p.m. UTC | #2
On Wed, 2014-03-05 at 13:02 -0800, Stephen Boyd wrote:
> On 03/05/14 11:29, Josh Cartwright wrote:
> > Before performing additional cleanups to this driver, do the easy
> > cleanups first.
> >
> > Signed-off-by: Josh Cartwright <joshc@codeaurora.org>
> 
> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
> 
> > @@ -253,7 +253,7 @@ static int pm8xxx_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
> >  
> >  	ctrl_reg = rtc_dd->ctrl_reg;
> >  	ctrl_reg = alarm->enabled ? (ctrl_reg | PM8xxx_RTC_ALARM_ENABLE) :
> > -					(ctrl_reg & ~PM8xxx_RTC_ALARM_ENABLE);
> > +				    (ctrl_reg & ~PM8xxx_RTC_ALARM_ENABLE);
> >  
> >  	rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base, 1);
> >  	if (rc < 0) {
> 
> This could be better style with more lines:
> 
> if (alarm->enabled)
>     ctrl_reg |= PM8xxx_RTC_ALARM_ENABLE;
> else
>     ctrl_reg &= ~PM8xxx_RTC_ALARM_ENABLE;
> 

I agree.

Maybe something like a set_or_clear_bits macro similar to clamp
could be useful.

Maybe:

#define set_or_clear_bits(value, test, bits)	\
({						\
	typeof value _value;			\
	if (test)				\
		_value = (value) | (bits);	\
	else					\
		_value = (value) & (~(bits));	\
	_value;					\
})

so the code above could be something like:

	ctrl_reg = set_or_clear_bits(ctrl_reg, alarm->enabled, PM8xxx_RTC_ALARM_ENABLE);

(or some other better macro name, or maybe not type
 the value name twice and have it set by the macro)

There's at least a few dozen like alarm->enabled use
above that could be converted in drivers/.

( a few false positives here too )

$ grep-2.5.4 -rP --include=*.[ch] "([\w\.\>\[\]\-]+)\s*=[^;\?]+\?\s*\(?\s*\1\s*[\&\|][^;]+;" drivers/
drivers/input/misc/twl4030-vibra.c:		reg = (dir) ? (reg | TWL4030_VIBRA_DIR) :
			(reg & ~TWL4030_VIBRA_DIR);
drivers/ata/libata-scsi.c:	tf->device = dev->devno ?
		tf->device | ATA_DEV1 : tf->device & ~ATA_DEV1;
drivers/ata/pata_samsung_cf.c:	reg = mode ? (reg & ~S3C_ATA_CFG_SWAP) : (reg | S3C_ATA_CFG_SWAP);
drivers/ata/pata_samsung_cf.c:	temp = state ? (temp | 1) : (temp & ~1);
drivers/staging/iio/accel/lis3l02dq_core.c:		control = val & 0x3f ?
			(control | LIS3L02DQ_REG_CTRL_2_ENABLE_INTERRUPT) :
			(control & ~LIS3L02DQ_REG_CTRL_2_ENABLE_INTERRUPT);
drivers/staging/media/sn9c102/sn9c102_core.c:	rect->left = (s->_rect.left & 1L) ? rect->left | 1L : rect->left & ~1L;
drivers/staging/media/sn9c102/sn9c102_core.c:	rect->top = (s->_rect.top & 1L) ? rect->top | 1L : rect->top & ~1L;
drivers/message/fusion/mptsas.c:	ioc->device_missing_delay = (device_missing_delay & MPI_SAS_IOUNIT1_REPORT_MISSING_UNIT_16) ?
	    (device_missing_delay & MPI_SAS_IOUNIT1_REPORT_MISSING_TIMEOUT_MASK) * 16 :
	    device_missing_delay & MPI_SAS_IOUNIT1_REPORT_MISSING_TIMEOUT_MASK;
drivers/gpio/gpio-max732x.c:	reg_out = (val) ? reg_out | mask : reg_out & ~mask;
drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c:	mac_filters->ucast_drop_all = drop_all_ucast ?
		mac_filters->ucast_drop_all | mask :
		mac_filters->ucast_drop_all & ~mask;
drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c:	mac_filters->mcast_drop_all = drop_all_mcast ?
		mac_filters->mcast_drop_all | mask :
		mac_filters->mcast_drop_all & ~mask;
drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c:	mac_filters->ucast_accept_all = accp_all_ucast ?
		mac_filters->ucast_accept_all | mask :
		mac_filters->ucast_accept_all & ~mask;
drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c:	mac_filters->mcast_accept_all = accp_all_mcast ?
		mac_filters->mcast_accept_all | mask :
		mac_filters->mcast_accept_all & ~mask;
drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c:	mac_filters->bcast_accept_all = accp_all_bcast ?
		mac_filters->bcast_accept_all | mask :
		mac_filters->bcast_accept_all & ~mask;
drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c:	mac_filters->unmatched_unicast = unmatched_unicast ?
		mac_filters->unmatched_unicast | mask :
		mac_filters->unmatched_unicast & ~mask;
drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h:				reg_bit_map = new_cos ?
					      (reg_bit_map | q_bit_map) :
					      (reg_bit_map & (~q_bit_map));
drivers/ide/pdc202xx_old.c:		word_count = (rq_data_dir(rq) == READ) ?
					word_count | 0x05000000 :
					word_count | 0x06000000;
drivers/spi/spi-fsl-spi.c:		slvsel = on ? (slvsel | (1 << cs)) : (slvsel & ~(1 << cs));
drivers/rtc/rtc-pm8xxx.c:	ctrl_reg = alarm->enabled ? (ctrl_reg | PM8xxx_RTC_ALARM_ENABLE) :
					(ctrl_reg & ~PM8xxx_RTC_ALARM_ENABLE);
drivers/rtc/rtc-pm8xxx.c:	ctrl_reg = (enable) ? (ctrl_reg | PM8xxx_RTC_ALARM_ENABLE) :
				(ctrl_reg & ~PM8xxx_RTC_ALARM_ENABLE);
drivers/platform/x86/acer-wmi.c:	set_params.devices = (value) ? (devices | device) : (devices & ~device);
drivers/media/i2c/ov9650.c:		reg = awb ? reg | REG_COM8 : reg & ~REG_COM8;
drivers/media/i2c/ov9650.c:	com14 = value ? com14 | COM14_EDGE_EN : com14 & ~COM14_EDGE_EN;
drivers/media/i2c/ov9650.c:	reg = value ? reg | COM23_TEST_MODE : reg & ~COM23_TEST_MODE;
drivers/media/i2c/s5k6aa.c:		reg = awb ? reg | AALG_WB_EN_MASK : reg & ~AALG_WB_EN_MASK;
drivers/media/usb/dvb-usb-v2/lmedm04.c:	cold = (cold > 0) ? (cold & 1) : 0;
drivers/media/usb/gspca/m5602/m5602_s5k83a.c:	data[0] = (vflip) ? data[0] | 0x40 : data[0];
drivers/media/usb/gspca/m5602/m5602_s5k83a.c:	data[0] = (hflip) ? data[0] | 0x80 : data[0];
drivers/media/dvb-frontends/dib3000mb.c:	pid = (onoff ? pid | DIB3000_ACTIVATE_PID_FILTERING : 0);
drivers/video/s1d13xxxfb.c:	regno=((regno & 1) ? (regno & ~1L) : (regno + 1));
drivers/video/s1d13xxxfb.c:	regno=((regno & 1) ? (regno & ~1L) : (regno + 1));
drivers/video/i810/i810_main.c:	val = (mode == OFF) ? val | SCR_OFF :
		val & ~SCR_OFF;
drivers/video/i810/i810_main.c:	reg = (mode == OFF) ? reg & ~0x80 :
		reg | 0x80;
drivers/video/i810/i810_main.c:	temp = (mode == ON) ? temp | CURSOR_ENABLE_MASK :
		temp & ~CURSOR_ENABLE_MASK;
drivers/atm/eni.c:			tonga = (address >> j) & 1 ? tonga | SEPROM_DATA :
			    tonga & ~SEPROM_DATA;


--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Josh Cartwright March 5, 2014, 11:51 p.m. UTC | #3
On Wed, Mar 05, 2014 at 01:02:29PM -0800, Stephen Boyd wrote:
> On 03/05/14 11:29, Josh Cartwright wrote:
> > Before performing additional cleanups to this driver, do the easy
> > cleanups first.
> >
> > Signed-off-by: Josh Cartwright <joshc@codeaurora.org>
> 
> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>

Thanks for the reviews.

> > @@ -253,7 +253,7 @@ static int pm8xxx_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
> >  
> >  	ctrl_reg = rtc_dd->ctrl_reg;
> >  	ctrl_reg = alarm->enabled ? (ctrl_reg | PM8xxx_RTC_ALARM_ENABLE) :
> > -					(ctrl_reg & ~PM8xxx_RTC_ALARM_ENABLE);
> > +				    (ctrl_reg & ~PM8xxx_RTC_ALARM_ENABLE);
> >  
> >  	rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base, 1);
> >  	if (rc < 0) {
> 
> This could be better style with more lines:
> 
> if (alarm->enabled)
>     ctrl_reg |= PM8xxx_RTC_ALARM_ENABLE;
> else
>     ctrl_reg &= ~PM8xxx_RTC_ALARM_ENABLE;

Agreed, I'll clean this up in a v2.

I might go back and see just how much can be cleanup up to use the
regmap_update_bits() API as well.

Thanks,
  Josh
diff mbox

Patch

diff --git a/drivers/rtc/rtc-pm8xxx.c b/drivers/rtc/rtc-pm8xxx.c
index bd76ffe9..772b070 100644
--- a/drivers/rtc/rtc-pm8xxx.c
+++ b/drivers/rtc/rtc-pm8xxx.c
@@ -53,7 +53,7 @@  struct pm8xxx_rtc {
 	int rtc_read_base;
 	int rtc_write_base;
 	int alarm_rw_base;
-	u8  ctrl_reg;
+	u8 ctrl_reg;
 	struct device *rtc_dev;
 	spinlock_t ctrl_reg_lock;
 };
@@ -63,7 +63,7 @@  struct pm8xxx_rtc {
  * hardware limitation.
  */
 static int pm8xxx_read_wrapper(struct pm8xxx_rtc *rtc_dd, u8 *rtc_val,
-		int base, int count)
+			       int base, int count)
 {
 	int i, rc;
 	struct device *parent = rtc_dd->rtc_dev->parent;
@@ -80,7 +80,7 @@  static int pm8xxx_read_wrapper(struct pm8xxx_rtc *rtc_dd, u8 *rtc_val,
 }
 
 static int pm8xxx_write_wrapper(struct pm8xxx_rtc *rtc_dd, u8 *rtc_val,
-		int base, int count)
+				int base, int count)
 {
 	int i, rc;
 	struct device *parent = rtc_dd->rtc_dev->parent;
@@ -126,15 +126,15 @@  static int pm8xxx_rtc_set_time(struct device *dev, struct rtc_time *tm)
 		alarm_enabled = 1;
 		ctrl_reg &= ~PM8xxx_RTC_ALARM_ENABLE;
 		rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base,
-				1);
+					  1);
 		if (rc < 0) {
-			dev_err(dev, "Write to RTC control register "
-								"failed\n");
+			dev_err(dev, "Write to RTC control register failed\n");
 			goto rtc_rw_fail;
 		}
 		rtc_dd->ctrl_reg = ctrl_reg;
-	} else
+	} else {
 		spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
+	}
 
 	/* Write 0 to Byte[0] */
 	reg = 0;
@@ -146,7 +146,7 @@  static int pm8xxx_rtc_set_time(struct device *dev, struct rtc_time *tm)
 
 	/* Write Byte[1], Byte[2], Byte[3] */
 	rc = pm8xxx_write_wrapper(rtc_dd, value + 1,
-					rtc_dd->rtc_write_base + 1, 3);
+				  rtc_dd->rtc_write_base + 1, 3);
 	if (rc < 0) {
 		dev_err(dev, "Write to RTC write data register failed\n");
 		goto rtc_rw_fail;
@@ -162,10 +162,9 @@  static int pm8xxx_rtc_set_time(struct device *dev, struct rtc_time *tm)
 	if (alarm_enabled) {
 		ctrl_reg |= PM8xxx_RTC_ALARM_ENABLE;
 		rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base,
-									1);
+					  1);
 		if (rc < 0) {
-			dev_err(dev, "Write to RTC control register "
-								"failed\n");
+			dev_err(dev, "Write to RTC control register failed\n");
 			goto rtc_rw_fail;
 		}
 		rtc_dd->ctrl_reg = ctrl_reg;
@@ -186,7 +185,7 @@  static int pm8xxx_rtc_read_time(struct device *dev, struct rtc_time *tm)
 	struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
 
 	rc = pm8xxx_read_wrapper(rtc_dd, value, rtc_dd->rtc_read_base,
-							NUM_8_BIT_RTC_REGS);
+				 NUM_8_BIT_RTC_REGS);
 	if (rc < 0) {
 		dev_err(dev, "RTC read data register failed\n");
 		return rc;
@@ -204,7 +203,8 @@  static int pm8xxx_rtc_read_time(struct device *dev, struct rtc_time *tm)
 
 	if (unlikely(reg < value[0])) {
 		rc = pm8xxx_read_wrapper(rtc_dd, value,
-				rtc_dd->rtc_read_base, NUM_8_BIT_RTC_REGS);
+					 rtc_dd->rtc_read_base,
+					 NUM_8_BIT_RTC_REGS);
 		if (rc < 0) {
 			dev_err(dev, "RTC read data register failed\n");
 			return rc;
@@ -222,8 +222,8 @@  static int pm8xxx_rtc_read_time(struct device *dev, struct rtc_time *tm)
 	}
 
 	dev_dbg(dev, "secs = %lu, h:m:s == %d:%d:%d, d/m/y = %d/%d/%d\n",
-				secs, tm->tm_hour, tm->tm_min, tm->tm_sec,
-				tm->tm_mday, tm->tm_mon, tm->tm_year);
+		secs, tm->tm_hour, tm->tm_min, tm->tm_sec,
+		tm->tm_mday, tm->tm_mon, tm->tm_year);
 
 	return 0;
 }
@@ -245,7 +245,7 @@  static int pm8xxx_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 	spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags);
 
 	rc = pm8xxx_write_wrapper(rtc_dd, value, rtc_dd->alarm_rw_base,
-							NUM_8_BIT_RTC_REGS);
+				  NUM_8_BIT_RTC_REGS);
 	if (rc < 0) {
 		dev_err(dev, "Write to RTC ALARM register failed\n");
 		goto rtc_rw_fail;
@@ -253,7 +253,7 @@  static int pm8xxx_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 
 	ctrl_reg = rtc_dd->ctrl_reg;
 	ctrl_reg = alarm->enabled ? (ctrl_reg | PM8xxx_RTC_ALARM_ENABLE) :
-					(ctrl_reg & ~PM8xxx_RTC_ALARM_ENABLE);
+				    (ctrl_reg & ~PM8xxx_RTC_ALARM_ENABLE);
 
 	rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base, 1);
 	if (rc < 0) {
@@ -264,9 +264,9 @@  static int pm8xxx_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 	rtc_dd->ctrl_reg = ctrl_reg;
 
 	dev_dbg(dev, "Alarm Set for h:r:s=%d:%d:%d, d/m/y=%d/%d/%d\n",
-				alarm->time.tm_hour, alarm->time.tm_min,
-				alarm->time.tm_sec, alarm->time.tm_mday,
-				alarm->time.tm_mon, alarm->time.tm_year);
+		alarm->time.tm_hour, alarm->time.tm_min,
+		alarm->time.tm_sec, alarm->time.tm_mday,
+		alarm->time.tm_mon, alarm->time.tm_year);
 rtc_rw_fail:
 	spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
 	return rc;
@@ -280,7 +280,7 @@  static int pm8xxx_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 	struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
 
 	rc = pm8xxx_read_wrapper(rtc_dd, value, rtc_dd->alarm_rw_base,
-			NUM_8_BIT_RTC_REGS);
+				 NUM_8_BIT_RTC_REGS);
 	if (rc < 0) {
 		dev_err(dev, "RTC alarm time read failed\n");
 		return rc;
@@ -297,9 +297,9 @@  static int pm8xxx_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 	}
 
 	dev_dbg(dev, "Alarm set for - h:r:s=%d:%d:%d, d/m/y=%d/%d/%d\n",
-				alarm->time.tm_hour, alarm->time.tm_min,
-				alarm->time.tm_sec, alarm->time.tm_mday,
-				alarm->time.tm_mon, alarm->time.tm_year);
+		alarm->time.tm_hour, alarm->time.tm_min,
+		alarm->time.tm_sec, alarm->time.tm_mday,
+		alarm->time.tm_mon, alarm->time.tm_year);
 
 	return 0;
 }
@@ -313,8 +313,8 @@  static int pm8xxx_rtc_alarm_irq_enable(struct device *dev, unsigned int enable)
 
 	spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags);
 	ctrl_reg = rtc_dd->ctrl_reg;
-	ctrl_reg = (enable) ? (ctrl_reg | PM8xxx_RTC_ALARM_ENABLE) :
-				(ctrl_reg & ~PM8xxx_RTC_ALARM_ENABLE);
+	ctrl_reg = enable ? (ctrl_reg | PM8xxx_RTC_ALARM_ENABLE) :
+			    (ctrl_reg & ~PM8xxx_RTC_ALARM_ENABLE);
 
 	rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base, 1);
 	if (rc < 0) {
@@ -354,8 +354,8 @@  static irqreturn_t pm8xxx_alarm_trigger(int irq, void *dev_id)
 	rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base, 1);
 	if (rc < 0) {
 		spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
-		dev_err(rtc_dd->rtc_dev, "Write to RTC control register "
-								"failed\n");
+		dev_err(rtc_dd->rtc_dev,
+			"Write to RTC control register failed\n");
 		goto rtc_alarm_handled;
 	}
 
@@ -364,19 +364,19 @@  static irqreturn_t pm8xxx_alarm_trigger(int irq, void *dev_id)
 
 	/* Clear RTC alarm register */
 	rc = pm8xxx_read_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base +
-						PM8XXX_ALARM_CTRL_OFFSET, 1);
+				 PM8XXX_ALARM_CTRL_OFFSET, 1);
 	if (rc < 0) {
-		dev_err(rtc_dd->rtc_dev, "RTC Alarm control register read "
-								"failed\n");
+		dev_err(rtc_dd->rtc_dev,
+			"RTC Alarm control register read failed\n");
 		goto rtc_alarm_handled;
 	}
 
 	ctrl_reg &= ~PM8xxx_RTC_ALARM_CLEAR;
 	rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base +
-						PM8XXX_ALARM_CTRL_OFFSET, 1);
+				  PM8XXX_ALARM_CTRL_OFFSET, 1);
 	if (rc < 0)
-		dev_err(rtc_dd->rtc_dev, "Write to RTC Alarm control register"
-								" failed\n");
+		dev_err(rtc_dd->rtc_dev,
+			"Write to RTC Alarm control register failed\n");
 
 rtc_alarm_handled:
 	return IRQ_HANDLED;
@@ -409,7 +409,7 @@  static int pm8xxx_rtc_probe(struct platform_device *pdev)
 	}
 
 	rtc_resource = platform_get_resource_byname(pdev, IORESOURCE_IO,
-							"pmic_rtc_base");
+						    "pmic_rtc_base");
 	if (!(rtc_resource && rtc_resource->start)) {
 		dev_err(&pdev->dev, "RTC IO resource absent!\n");
 		return -ENXIO;
@@ -436,31 +436,31 @@  static int pm8xxx_rtc_probe(struct platform_device *pdev)
 		rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base,
 									1);
 		if (rc < 0) {
-			dev_err(&pdev->dev, "Write to RTC control register "
-								"failed\n");
+			dev_err(&pdev->dev,
+				"Write to RTC control register failed\n");
 			return rc;
 		}
 	}
 
 	rtc_dd->ctrl_reg = ctrl_reg;
-	if (rtc_write_enable == true)
+	if (rtc_write_enable)
 		pm8xxx_rtc_ops.set_time = pm8xxx_rtc_set_time;
 
 	platform_set_drvdata(pdev, rtc_dd);
 
 	/* Register the RTC device */
 	rtc_dd->rtc = devm_rtc_device_register(&pdev->dev, "pm8xxx_rtc",
-				&pm8xxx_rtc_ops, THIS_MODULE);
+					       &pm8xxx_rtc_ops, THIS_MODULE);
 	if (IS_ERR(rtc_dd->rtc)) {
 		dev_err(&pdev->dev, "%s: RTC registration failed (%ld)\n",
-					__func__, PTR_ERR(rtc_dd->rtc));
+			__func__, PTR_ERR(rtc_dd->rtc));
 		return PTR_ERR(rtc_dd->rtc);
 	}
 
 	/* Request the alarm IRQ */
 	rc = request_any_context_irq(rtc_dd->rtc_alarm_irq,
-				 pm8xxx_alarm_trigger, IRQF_TRIGGER_RISING,
-				 "pm8xxx_rtc_alarm", rtc_dd);
+				     pm8xxx_alarm_trigger, IRQF_TRIGGER_RISING,
+				     "pm8xxx_rtc_alarm", rtc_dd);
 	if (rc < 0) {
 		dev_err(&pdev->dev, "Request IRQ failed (%d)\n", rc);
 		return rc;
@@ -505,7 +505,9 @@  static int pm8xxx_rtc_suspend(struct device *dev)
 }
 #endif
 
-static SIMPLE_DEV_PM_OPS(pm8xxx_rtc_pm_ops, pm8xxx_rtc_suspend, pm8xxx_rtc_resume);
+static SIMPLE_DEV_PM_OPS(pm8xxx_rtc_pm_ops,
+			 pm8xxx_rtc_suspend,
+			 pm8xxx_rtc_resume);
 
 static struct platform_driver pm8xxx_rtc_driver = {
 	.probe		= pm8xxx_rtc_probe,