[9/9] ARM: DT: qcom: Add Qualcomm crypto driver binding document

Commit Message

Stanimir Varbanov April 3, 2014, 4:18 p.m. UTC

Here is Qualcomm crypto driver device tree binding documentation
to used as a reference example.

Signed-off-by: Stanimir Varbanov <[e-mail]>
---
 .../devicetree/bindings/crypto/qcom-qce.txt        | 25 ++++++++++++++++++++++
 1 file changed, 25 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/crypto/qcom-qce.txt

Patch

diff --git a/Documentation/devicetree/bindings/crypto/qcom-qce.txt b/Documentation/devicetree/bindings/crypto/qcom-qce.txt
new file mode 100644
index 000000000000..7ec67c90d2d1
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/qcom-qce.txt
@@ -0,0 +1,25 @@ 
+Qualcomm crypto engine driver
+
+Required properties:
+
+- compatible  : should be "qcom,crypto-v5.1"
+- reg         : specifies base physical address and size of the registers map
+- clocks      : phandle to clock-controller plus clock-specifier pair
+- clock-names : "iface" clocks register interface
+		"bus" clocks data transfer interface
+		"core" clocks reset of the crypto block
+- dmas        : DMA specifiers for tx and rx dma channels. For more see
+		Documentation/devicetree/bindings/dma/dma.txt
+- dma-names   : DMA request names should be "rx" and "tx"
+
+Example:
+	crypto@fd45a000 {
+		compatible = "qcom,crypto-v5.1";
+		reg = <0xfd45a000 0x6000>;
+		clocks = <&gcc GCC_CE2_AHB_CLK>,
+			 <&gcc GCC_CE2_AXI_CLK>,
+			 <&gcc GCC_CE2_CLK>;
+		clock-names = "iface", "bus", "core";
+		dmas = <&cryptobam 2>, <&cryptobam 3>;
+		dma-names = "rx", "tx";
+	};