From patchwork Tue Apr 22 09:20:33 2014 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Ivan T. Ivanov" X-Patchwork-Id: 4030091 Return-Path: X-Original-To: patchwork-linux-arm-msm@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork1.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.19.201]) by patchwork1.web.kernel.org (Postfix) with ESMTP id A0E9C9F1F4 for ; Tue, 22 Apr 2014 09:24:24 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id 3AE0620219 for ; Tue, 22 Apr 2014 09:24:20 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 9E16D20211 for ; Tue, 22 Apr 2014 09:24:15 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755364AbaDVJWy (ORCPT ); Tue, 22 Apr 2014 05:22:54 -0400 Received: from ns.mm-sol.com ([37.157.136.199]:53580 "EHLO extserv.mm-sol.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755042AbaDVJVq (ORCPT ); Tue, 22 Apr 2014 05:21:46 -0400 Received: from iivanov-dev.wifi.mm-sol.com (unknown [37.157.136.206]) by extserv.mm-sol.com (Postfix) with ESMTPSA id ED43EC790; Tue, 22 Apr 2014 12:21:37 +0300 (EEST) From: "Ivan T. Ivanov" To: Felipe Balbi Cc: "Ivan T. Ivanov" , Greg Kroah-Hartman , linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, Tim Bird , Mayank Rana Subject: [PATCH v6 14/19] usb: phy: msm: Correct USB PHY Reset sequence for newer platform Date: Tue, 22 Apr 2014 12:20:33 +0300 Message-Id: <1398158438-21579-15-git-send-email-iivanov@mm-sol.com> X-Mailer: git-send-email 1.8.3.2 In-Reply-To: <1398158438-21579-1-git-send-email-iivanov@mm-sol.com> References: <1398158438-21579-1-git-send-email-iivanov@mm-sol.com> Sender: linux-arm-msm-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org X-Spam-Status: No, score=-7.5 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_HI, RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=unavailable version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP From: "Ivan T. Ivanov" On few legacy platforms, USB PHY is having dedicated reset clk. It is used to reset USB PHY after putting USB PHY into low power mode and for calibration of USB PHY. Putting USB PHY into low power mode is causing ulpi read/write timeout as expected. USB PHY reset clk is not available on newer platform. For 28nm PHY, reset USB PHY after resestting USB LINK. Also reset USB PHY using USB_PHY_PON bit with USB_OTG_HS_PHY_CTRL register after programming USB PHY Override registers as suggested with hardware programming guidelines. Signed-off-by: Ivan T. Ivanov Signed-off-by: Tim Bird Cc: Mayank Rana --- drivers/usb/phy/phy-msm-usb.c | 140 ++++++++++++++++++++++++--------------- include/linux/usb/msm_hsusb_hw.h | 5 ++ 2 files changed, 93 insertions(+), 52 deletions(-) -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index b03d7f1..dababf9 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c @@ -48,6 +48,7 @@ #define DRIVER_NAME "msm_otg" #define ULPI_IO_TIMEOUT_USEC (10 * 1000) +#define LINK_RESET_TIMEOUT_USEC (250 * 1000) #define USB_PHY_3P3_VOL_MIN 3050000 /* uV */ #define USB_PHY_3P3_VOL_MAX 3300000 /* uV */ @@ -267,77 +268,35 @@ static int msm_otg_phy_clk_reset(struct msm_otg *motg) return ret; } -static int msm_otg_phy_reset(struct msm_otg *motg) +static int msm_link_reset(struct msm_otg *motg) { u32 val; int ret; - int retries; ret = msm_otg_link_clk_reset(motg, 1); if (ret) return ret; - ret = msm_otg_phy_clk_reset(motg); - if (ret) - return ret; - ret = msm_otg_link_clk_reset(motg, 0); - if (ret) - return ret; - val = readl(USB_PORTSC) & ~PORTSC_PTS_MASK; - writel(val | PORTSC_PTS_ULPI, USB_PORTSC); - - for (retries = 3; retries > 0; retries--) { - ret = ulpi_write(&motg->phy, ULPI_FUNC_CTRL_SUSPENDM, - ULPI_CLR(ULPI_FUNC_CTRL)); - if (!ret) - break; - ret = msm_otg_phy_clk_reset(motg); - if (ret) - return ret; - } - if (!retries) - return -ETIMEDOUT; + /* wait for 1ms delay as suggested in HPG. */ + usleep_range(1000, 1200); - /* This reset calibrates the phy, if the above write succeeded */ - ret = msm_otg_phy_clk_reset(motg); + ret = msm_otg_link_clk_reset(motg, 0); if (ret) return ret; - for (retries = 3; retries > 0; retries--) { - ret = ulpi_read(&motg->phy, ULPI_DEBUG); - if (ret != -ETIMEDOUT) - break; - ret = msm_otg_phy_clk_reset(motg); - if (ret) - return ret; - } - if (!retries) - return -ETIMEDOUT; - if (motg->phy_number) writel(readl(USB_PHY_CTRL2) | BIT(16), USB_PHY_CTRL2); - dev_info(motg->phy.dev, "phy_reset: success\n"); + val = readl(USB_PORTSC) & ~PORTSC_PTS_MASK; + writel(val | PORTSC_PTS_ULPI, USB_PORTSC); + return 0; } -#define LINK_RESET_TIMEOUT_USEC (250 * 1000) static int msm_otg_reset(struct usb_phy *phy) { struct msm_otg *motg = container_of(phy, struct msm_otg, phy); - struct msm_otg_platform_data *pdata = motg->pdata; int cnt = 0; - int ret; - u32 val = 0; - u32 ulpi_val = 0; - - ret = msm_otg_phy_reset(motg); - if (ret) { - dev_err(phy->dev, "phy_reset failed\n"); - return ret; - } - - ulpi_init(motg); writel(USBCMD_RESET, USB_USBCMD); while (cnt < LINK_RESET_TIMEOUT_USEC) { @@ -351,11 +310,86 @@ static int msm_otg_reset(struct usb_phy *phy) /* select ULPI phy */ writel(0x80000000, USB_PORTSC); + writel(0x0, USB_AHBBURST); + writel(0x08, USB_AHBMODE); + + if (motg->phy_number) + writel(readl(USB_PHY_CTRL2) | BIT(16), USB_PHY_CTRL2); + return 0; +} + +static void msm_phy_reset(struct msm_otg *motg) +{ + void __iomem *addr; + + if (motg->pdata->phy_type != SNPS_28NM_INTEGRATED_PHY) { + msm_otg_phy_clk_reset(motg); + return; + } + + addr = USB_PHY_CTRL; + if (motg->phy_number) + addr = USB_PHY_CTRL2; + + /* Assert USB PHY_POR */ + writel(readl(addr) | PHY_POR_ASSERT, addr); + + /* + * wait for minimum 10 microseconds as suggested in HPG. + * Use a slightly larger value since the exact value didn't + * work 100% of the time. + */ + udelay(12); + + /* Deassert USB PHY_POR */ + writel(readl(addr) & ~PHY_POR_ASSERT, addr); +} + +static int msm_usb_reset(struct usb_phy *phy) +{ + struct msm_otg *motg = container_of(phy, struct msm_otg, phy); + int ret; + + if (!IS_ERR(motg->core_clk)) + clk_prepare_enable(motg->core_clk); + + ret = msm_link_reset(motg); + if (ret) { + dev_err(phy->dev, "phy_reset failed\n"); + return ret; + } + + ret = msm_otg_reset(&motg->phy); + if (ret) { + dev_err(phy->dev, "link reset failed\n"); + return ret; + } msleep(100); - writel(0x0, USB_AHBBURST); - writel(0x00, USB_AHBMODE); + /* Reset USB PHY after performing USB Link RESET */ + msm_phy_reset(motg); + + if (!IS_ERR(motg->core_clk)) + clk_disable_unprepare(motg->core_clk); + + return 0; +} + +static int msm_phy_init(struct usb_phy *phy) +{ + struct msm_otg *motg = container_of(phy, struct msm_otg, phy); + struct msm_otg_platform_data *pdata = motg->pdata; + u32 val, ulpi_val = 0; + + /* Program USB PHY Override registers. */ + ulpi_init(motg); + + /* + * It is recommended in HPG to reset USB PHY after programming + * USB PHY Override registers. + */ + msm_phy_reset(motg); if (pdata->otg_control == OTG_PHY_CONTROL) { val = readl(USB_OTGSC); @@ -1571,7 +1605,7 @@ static int msm_otg_probe(struct platform_device *pdev) goto disable_ldo; } - phy->init = msm_otg_reset; + phy->init = msm_phy_init; phy->set_power = msm_otg_set_power; phy->io_ops = &msm_otg_io_ops; @@ -1580,6 +1614,8 @@ static int msm_otg_probe(struct platform_device *pdev) phy->otg->set_host = msm_otg_set_host; phy->otg->set_peripheral = msm_otg_set_peripheral; + msm_usb_reset(phy); + ret = usb_add_phy(&motg->phy, USB_PHY_TYPE_USB2); if (ret) { dev_err(&pdev->dev, "usb_add_phy failed\n"); diff --git a/include/linux/usb/msm_hsusb_hw.h b/include/linux/usb/msm_hsusb_hw.h index e6d7035..575c743 100644 --- a/include/linux/usb/msm_hsusb_hw.h +++ b/include/linux/usb/msm_hsusb_hw.h @@ -42,9 +42,14 @@ #define ULPI_DATA(n) ((n) & 255) #define ULPI_DATA_READ(n) (((n) >> 8) & 255) +/* synopsys 28nm phy registers */ +#define ULPI_PWR_CLK_MNG_REG 0x88 +#define OTG_COMP_DISABLE BIT(0) + #define ASYNC_INTR_CTRL (1 << 29) /* Enable async interrupt */ #define ULPI_STP_CTRL (1 << 30) /* Block communication with PHY */ #define PHY_RETEN (1 << 1) /* PHY retention enable/disable */ +#define PHY_POR_ASSERT (1 << 0) /* USB2 28nm PHY POR ASSERT */ /* OTG definitions */ #define OTGSC_INTSTS_MASK (0x7f << 16)