@@ -8,9 +8,33 @@ Required properties:
- interrupts : <interrupt mapping for UFS host controller IRQ>
- reg : <registers mapping>
+Optional properties:
+- vcc-supply : phandle to VCC supply regulator node
+- vccq-supply : phandle to VCCQ supply regulator node
+- vccq2-supply : phandle to VCCQ2 supply regulator node
+- vcc-supply-1p8 : For embedded UFS devices, valid VCC range is 1.7-1.95V
+ or 2.7-3.6V. This boolean property when set, specifies
+ to use low voltage range of 1.7-1.95V. Note for external
+ UFS cards this property is invalid and valid VCC range is
+ always 2.7-3.6V.
+- vcc-max-microamp : specifies max. load that can be drawn from vcc supply
+- vccq-max-microamp : specifies max. load that can be drawn from vccq supply
+- vccq2-max-microamp : specifies max. load that can be drawn from vccq2 supply
+
+Note: If above properties are not defined it can be assumed that the supply
+regulators are always on.
+
Example:
ufshc@0xfc598000 {
compatible = "jedec,ufs-1.1";
reg = <0xfc598000 0x800>;
interrupts = <0 28 0>;
+
+ vcc-supply = <&xxx_reg1>;
+ vcc-supply-1p8;
+ vccq-supply = <&xxx_reg2>;
+ vccq2-supply = <&xxx_reg3>;
+ vcc-max-microamp = 500000;
+ vccq-max-microamp = 200000;
+ vccq2-max-microamp = 200000;
};
@@ -362,4 +362,29 @@ struct ufs_query_res {
struct utp_upiu_query upiu_res;
};
+#define UFS_VREG_VCC_MIN_UV 2700000 /* uV */
+#define UFS_VREG_VCC_MAX_UV 3600000 /* uV */
+#define UFS_VREG_VCC_1P8_MIN_UV 1700000 /* uV */
+#define UFS_VREG_VCC_1P8_MAX_UV 1950000 /* uV */
+#define UFS_VREG_VCCQ_MIN_UV 1100000 /* uV */
+#define UFS_VREG_VCCQ_MAX_UV 1300000 /* uV */
+#define UFS_VREG_VCCQ2_MIN_UV 1650000 /* uV */
+#define UFS_VREG_VCCQ2_MAX_UV 1950000 /* uV */
+
+struct ufs_vreg {
+ struct regulator *reg;
+ const char *name;
+ bool enabled;
+ int min_uV;
+ int max_uV;
+ int min_uA;
+ int max_uA;
+};
+
+struct ufs_vreg_info {
+ struct ufs_vreg *vcc;
+ struct ufs_vreg *vccq;
+ struct ufs_vreg *vccq2;
+};
+
#endif /* End of Header */
@@ -53,6 +53,99 @@ static struct ufs_hba_variant_ops *get_variant_ops(struct device *dev)
return NULL;
}
+#define MAX_PROP_SIZE 32
+static int ufshcd_populate_vreg(struct device *dev, const char *name,
+ struct ufs_vreg **out_vreg)
+{
+ int ret = 0;
+ char prop_name[MAX_PROP_SIZE];
+ struct ufs_vreg *vreg = NULL;
+ struct device_node *np = dev->of_node;
+
+ if (!np) {
+ dev_err(dev, "%s: non DT initialization\n", __func__);
+ goto out;
+ }
+
+ snprintf(prop_name, MAX_PROP_SIZE, "%s-supply", name);
+ if (!of_parse_phandle(np, prop_name, 0)) {
+ dev_info(dev, "%s: Unable to find %s regulator, assuming enabled\n",
+ __func__, prop_name);
+ goto out;
+ }
+
+ vreg = devm_kzalloc(dev, sizeof(*vreg), GFP_KERNEL);
+ if (!vreg) {
+ dev_err(dev, "No memory for %s regulator\n", name);
+ goto out;
+ }
+
+ vreg->name = kstrdup(name, GFP_KERNEL);
+
+ snprintf(prop_name, MAX_PROP_SIZE, "%s-max-microamp", name);
+ ret = of_property_read_u32(np, prop_name, &vreg->max_uA);
+ if (ret) {
+ dev_err(dev, "%s: unable to find %s err %d\n",
+ __func__, prop_name, ret);
+ goto out_free;
+ }
+
+ vreg->min_uA = 0;
+ if (!strcmp(name, "vcc")) {
+ if (of_property_read_bool(np, "vcc-supply-1p8")) {
+ vreg->min_uV = UFS_VREG_VCC_1P8_MIN_UV;
+ vreg->max_uV = UFS_VREG_VCC_1P8_MAX_UV;
+ } else {
+ vreg->min_uV = UFS_VREG_VCC_MIN_UV;
+ vreg->max_uV = UFS_VREG_VCC_MAX_UV;
+ }
+ } else if (!strcmp(name, "vccq")) {
+ vreg->min_uV = UFS_VREG_VCCQ_MIN_UV;
+ vreg->max_uV = UFS_VREG_VCCQ_MAX_UV;
+ } else if (!strcmp(name, "vccq2")) {
+ vreg->min_uV = UFS_VREG_VCCQ2_MIN_UV;
+ vreg->max_uV = UFS_VREG_VCCQ2_MAX_UV;
+ }
+
+ goto out;
+
+out_free:
+ devm_kfree(dev, vreg);
+ vreg = NULL;
+out:
+ if (!ret)
+ *out_vreg = vreg;
+ return ret;
+}
+
+/**
+ * ufshcd_parse_regulator_info - get regulator info from device tree
+ * @hba: per adapter instance
+ *
+ * Get regulator info from device tree for vcc, vccq, vccq2 power supplies.
+ * If any of the supplies are not defined it is assumed that they are always-on
+ * and hence return zero. If the property is defined but parsing is failed
+ * then return corresponding error.
+ */
+static int ufshcd_parse_regulator_info(struct ufs_hba *hba)
+{
+ int err;
+ struct device *dev = hba->dev;
+ struct ufs_vreg_info *info = &hba->vreg_info;
+
+ err = ufshcd_populate_vreg(dev, "vcc", &info->vcc);
+ if (err)
+ goto out;
+
+ err = ufshcd_populate_vreg(dev, "vccq", &info->vccq);
+ if (err)
+ goto out;
+
+ err = ufshcd_populate_vreg(dev, "vccq2", &info->vccq2);
+out:
+ return err;
+}
+
#ifdef CONFIG_PM
/**
* ufshcd_pltfrm_suspend - suspend power management function
@@ -173,6 +266,13 @@ static int ufshcd_pltfrm_probe(struct platform_device *pdev)
hba->vops = get_variant_ops(&pdev->dev);
+ err = ufshcd_parse_regulator_info(hba);
+ if (err) {
+ dev_err(&pdev->dev, "%s: regulator init failed %d\n",
+ __func__, err);
+ goto out;
+ }
+
pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);
@@ -68,6 +68,16 @@
/* Interrupt aggregation default timeout, unit: 40us */
#define INT_AGGR_DEF_TO 0x02
+#define ufshcd_toggle_vreg(_dev, _vreg, _on) \
+ ({ \
+ int _ret; \
+ if (_on) \
+ _ret = ufshcd_enable_vreg(_dev, _vreg); \
+ else \
+ _ret = ufshcd_disable_vreg(_dev, _vreg); \
+ _ret; \
+ })
+
enum {
UFSHCD_MAX_CHANNEL = 0,
UFSHCD_MAX_ID = 1,
@@ -3193,6 +3203,153 @@ static struct scsi_host_template ufshcd_driver_template = {
.can_queue = UFSHCD_CAN_QUEUE,
};
+static int ufshcd_config_vreg(struct device *dev,
+ struct ufs_vreg *vreg, bool on)
+{
+ int ret = 0;
+ struct regulator *reg = vreg->reg;
+ const char *name = vreg->name;
+ int min_uV, uA_load;
+
+ BUG_ON(!vreg);
+
+ if (regulator_count_voltages(reg) > 0) {
+ min_uV = on ? vreg->min_uV : 0;
+ ret = regulator_set_voltage(reg, min_uV, vreg->max_uV);
+ if (ret) {
+ dev_err(dev, "%s: %s set voltage failed, err=%d\n",
+ __func__, name, ret);
+ goto out;
+ }
+
+ uA_load = on ? vreg->max_uA : 0;
+ ret = regulator_set_optimum_mode(reg, uA_load);
+ if (ret >= 0) {
+ /*
+ * regulator_set_optimum_mode() returns new regulator
+ * mode upon success.
+ */
+ ret = 0;
+ } else {
+ dev_err(dev, "%s: %s set optimum mode(uA_load=%d) failed, err=%d\n",
+ __func__, name, uA_load, ret);
+ goto out;
+ }
+ }
+out:
+ return ret;
+}
+
+static int ufshcd_enable_vreg(struct device *dev, struct ufs_vreg *vreg)
+{
+ int ret = 0;
+
+ if (!vreg || vreg->enabled)
+ goto out;
+
+ ret = ufshcd_config_vreg(dev, vreg, true);
+ if (!ret)
+ ret = regulator_enable(vreg->reg);
+
+ if (!ret)
+ vreg->enabled = true;
+ else
+ dev_err(dev, "%s: %s enable failed, err=%d\n",
+ __func__, vreg->name, ret);
+out:
+ return ret;
+}
+
+static int ufshcd_disable_vreg(struct device *dev, struct ufs_vreg *vreg)
+{
+ int ret = 0;
+
+ if (!vreg || !vreg->enabled)
+ goto out;
+
+ ret = regulator_disable(vreg->reg);
+
+ if (!ret) {
+ /* ignore errors on applying disable config */
+ ufshcd_config_vreg(dev, vreg, false);
+ vreg->enabled = false;
+ } else {
+ dev_err(dev, "%s: %s disable failed, err=%d\n",
+ __func__, vreg->name, ret);
+ }
+out:
+ return ret;
+}
+
+static int ufshcd_setup_vreg(struct ufs_hba *hba, bool on)
+{
+ int ret = 0;
+ struct device *dev = hba->dev;
+ struct ufs_vreg_info *info = &hba->vreg_info;
+
+ if (!info)
+ goto out;
+
+ ret = ufshcd_toggle_vreg(dev, info->vcc, on);
+ if (ret)
+ goto out;
+
+ ret = ufshcd_toggle_vreg(dev, info->vccq, on);
+ if (ret)
+ goto out;
+
+ ret = ufshcd_toggle_vreg(dev, info->vccq2, on);
+ if (ret)
+ goto out;
+
+out:
+ if (ret) {
+ ufshcd_toggle_vreg(dev, info->vccq2, false);
+ ufshcd_toggle_vreg(dev, info->vccq, false);
+ ufshcd_toggle_vreg(dev, info->vcc, false);
+ }
+ return ret;
+}
+
+static int ufshcd_get_vreg(struct device *dev, struct ufs_vreg *vreg)
+{
+ int ret = 0;
+
+ if (!vreg)
+ goto out;
+
+ vreg->reg = devm_regulator_get(dev, vreg->name);
+ if (IS_ERR(vreg->reg)) {
+ ret = PTR_ERR(vreg->reg);
+ dev_err(dev, "%s: %s get failed, err=%d\n",
+ __func__, vreg->name, ret);
+ }
+out:
+ return ret;
+}
+
+static int ufshcd_init_vreg(struct ufs_hba *hba)
+{
+ int ret = 0;
+ struct device *dev = hba->dev;
+ struct ufs_vreg_info *info = &hba->vreg_info;
+
+ if (!info)
+ goto out;
+
+ ret = ufshcd_get_vreg(dev, info->vcc);
+ if (ret)
+ goto out;
+
+ ret = ufshcd_get_vreg(dev, info->vccq);
+ if (ret)
+ goto out;
+
+ ret = ufshcd_get_vreg(dev, info->vccq2);
+out:
+ return ret;
+}
+
static int ufshcd_variant_hba_init(struct ufs_hba *hba)
{
int err = 0;
@@ -3248,6 +3405,36 @@ static void ufshcd_variant_hba_exit(struct ufs_hba *hba)
hba->vops->exit(hba);
}
+static int ufshcd_hba_init(struct ufs_hba *hba)
+{
+ int err;
+
+ err = ufshcd_init_vreg(hba);
+ if (err)
+ goto out;
+
+ err = ufshcd_setup_vreg(hba, true);
+ if (err)
+ goto out;
+
+ err = ufshcd_variant_hba_init(hba);
+ if (err)
+ goto out_disable_vreg;
+
+ goto out;
+
+out_disable_vreg:
+ ufshcd_setup_vreg(hba, false);
+out:
+ return err;
+}
+
+static void ufshcd_hba_exit(struct ufs_hba *hba)
+{
+ ufshcd_variant_hba_exit(hba);
+ ufshcd_setup_vreg(hba, false);
+}
+
/**
* ufshcd_suspend - suspend power management function
* @hba: per adapter instance
@@ -3333,7 +3520,7 @@ void ufshcd_remove(struct ufs_hba *hba)
scsi_host_put(hba->host);
- ufshcd_variant_hba_exit(hba);
+ ufshcd_hba_exit(hba);
}
EXPORT_SYMBOL_GPL(ufshcd_remove);
@@ -3412,7 +3599,7 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
hba->mmio_base = mmio_base;
hba->irq = irq;
- err = ufshcd_variant_hba_init(hba);
+ err = ufshcd_hba_init(hba);
if (err)
goto out_error;
@@ -3504,7 +3691,7 @@ out_remove_scsi_host:
scsi_remove_host(hba->host);
out_disable:
scsi_host_put(host);
- ufshcd_variant_hba_exit(hba);
+ ufshcd_hba_exit(hba);
out_error:
return err;
}
@@ -52,6 +52,7 @@
#include <linux/pm_runtime.h>
#include <linux/clk.h>
#include <linux/completion.h>
+#include <linux/regulator/consumer.h>
#include <asm/irq.h>
#include <asm/byteorder.h>
@@ -219,6 +220,7 @@ struct ufs_hba_variant_ops {
* @saved_uic_err: sticky UIC error mask
* @dev_cmd: ufs device management command information
* @auto_bkops_enabled: to track whether bkops is enabled in device
+ * @vreg_info: UFS device voltage regulator information
*/
struct ufs_hba {
void __iomem *mmio_base;
@@ -279,6 +281,7 @@ struct ufs_hba {
struct ufs_dev_cmd dev_cmd;
bool auto_bkops_enabled;
+ struct ufs_vreg_info vreg_info;
};
#define ufshcd_writel(hba, val, reg) \