diff --git a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
index 20468b2..65e3117 100644
--- a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
+++ b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
@@ -8,9 +8,33 @@ Required properties:
 - interrupts        : <interrupt mapping for UFS host controller IRQ>
 - reg               : <registers mapping>
 
+Optional properties:
+- vcc-supply            : phandle to VCC supply regulator node
+- vccq-supply           : phandle to VCCQ supply regulator node
+- vccq2-supply          : phandle to VCCQ2 supply regulator node
+- vcc-supply-1p8        : For embedded UFS devices, valid VCC range is 1.7-1.95V
+                          or 2.7-3.6V. This boolean property when set, specifies
+			  to use low voltage range of 1.7-1.95V. Note for external
+			  UFS cards this property is invalid and valid VCC range is
+			  always 2.7-3.6V.
+- vcc-max-microamp      : specifies max. load that can be drawn from vcc supply
+- vccq-max-microamp     : specifies max. load that can be drawn from vccq supply
+- vccq2-max-microamp    : specifies max. load that can be drawn from vccq2 supply
+
+Note: If above properties are not defined it can be assumed that the supply
+regulators are always on.
+
 Example:
 	ufshc@0xfc598000 {
 		compatible = "jedec,ufs-1.1";
 		reg = <0xfc598000 0x800>;
 		interrupts = <0 28 0>;
+
+		vcc-supply = <&xxx_reg1>;
+		vcc-supply-1p8;
+		vccq-supply = <&xxx_reg2>;
+		vccq2-supply = <&xxx_reg3>;
+		vcc-max-microamp = 500000;
+		vccq-max-microamp = 200000;
+		vccq2-max-microamp = 200000;
 	};
diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h
index fafcf5e..729ce7d 100644
--- a/drivers/scsi/ufs/ufs.h
+++ b/drivers/scsi/ufs/ufs.h
@@ -362,4 +362,29 @@ struct ufs_query_res {
 	struct utp_upiu_query upiu_res;
 };
 
+#define UFS_VREG_VCC_MIN_UV	   2700000 /* uV */
+#define UFS_VREG_VCC_MAX_UV	   3600000 /* uV */
+#define UFS_VREG_VCC_1P8_MIN_UV    1700000 /* uV */
+#define UFS_VREG_VCC_1P8_MAX_UV    1950000 /* uV */
+#define UFS_VREG_VCCQ_MIN_UV	   1100000 /* uV */
+#define UFS_VREG_VCCQ_MAX_UV	   1300000 /* uV */
+#define UFS_VREG_VCCQ2_MIN_UV	   1650000 /* uV */
+#define UFS_VREG_VCCQ2_MAX_UV	   1950000 /* uV */
+
+struct ufs_vreg {
+	struct regulator *reg;
+	const char *name;
+	bool enabled;
+	int min_uV;
+	int max_uV;
+	int min_uA;
+	int max_uA;
+};
+
+struct ufs_vreg_info {
+	struct ufs_vreg *vcc;
+	struct ufs_vreg *vccq;
+	struct ufs_vreg *vccq2;
+};
+
 #endif /* End of Header */
diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.c b/drivers/scsi/ufs/ufshcd-pltfrm.c
index d727b1a..51e47c4 100644
--- a/drivers/scsi/ufs/ufshcd-pltfrm.c
+++ b/drivers/scsi/ufs/ufshcd-pltfrm.c
@@ -53,6 +53,99 @@ static struct ufs_hba_variant_ops *get_variant_ops(struct device *dev)
 	return NULL;
 }
 
+#define MAX_PROP_SIZE 32
+static int ufshcd_populate_vreg(struct device *dev, const char *name,
+		struct ufs_vreg **out_vreg)
+{
+	int ret = 0;
+	char prop_name[MAX_PROP_SIZE];
+	struct ufs_vreg *vreg = NULL;
+	struct device_node *np = dev->of_node;
+
+	if (!np) {
+		dev_err(dev, "%s: non DT initialization\n", __func__);
+		goto out;
+	}
+
+	snprintf(prop_name, MAX_PROP_SIZE, "%s-supply", name);
+	if (!of_parse_phandle(np, prop_name, 0)) {
+		dev_info(dev, "%s: Unable to find %s regulator, assuming enabled\n",
+				__func__, prop_name);
+		goto out;
+	}
+
+	vreg = devm_kzalloc(dev, sizeof(*vreg), GFP_KERNEL);
+	if (!vreg) {
+		dev_err(dev, "No memory for %s regulator\n", name);
+		goto out;
+	}
+
+	vreg->name = kstrdup(name, GFP_KERNEL);
+
+	snprintf(prop_name, MAX_PROP_SIZE, "%s-max-microamp", name);
+	ret = of_property_read_u32(np, prop_name, &vreg->max_uA);
+	if (ret) {
+		dev_err(dev, "%s: unable to find %s err %d\n",
+				__func__, prop_name, ret);
+		goto out_free;
+	}
+
+	vreg->min_uA = 0;
+	if (!strcmp(name, "vcc")) {
+		if (of_property_read_bool(np, "vcc-supply-1p8")) {
+			vreg->min_uV = UFS_VREG_VCC_1P8_MIN_UV;
+			vreg->max_uV = UFS_VREG_VCC_1P8_MAX_UV;
+		} else {
+			vreg->min_uV = UFS_VREG_VCC_MIN_UV;
+			vreg->max_uV = UFS_VREG_VCC_MAX_UV;
+		}
+	} else if (!strcmp(name, "vccq")) {
+		vreg->min_uV = UFS_VREG_VCCQ_MIN_UV;
+		vreg->max_uV = UFS_VREG_VCCQ_MAX_UV;
+	} else if (!strcmp(name, "vccq2")) {
+		vreg->min_uV = UFS_VREG_VCCQ2_MIN_UV;
+		vreg->max_uV = UFS_VREG_VCCQ2_MAX_UV;
+	}
+
+	goto out;
+
+out_free:
+	devm_kfree(dev, vreg);
+	vreg = NULL;
+out:
+	if (!ret)
+		*out_vreg = vreg;
+	return ret;
+}
+
+/**
+ * ufshcd_parse_regulator_info - get regulator info from device tree
+ * @hba: per adapter instance
+ *
+ * Get regulator info from device tree for vcc, vccq, vccq2 power supplies.
+ * If any of the supplies are not defined it is assumed that they are always-on
+ * and hence return zero. If the property is defined but parsing is failed
+ * then return corresponding error.
+ */
+static int ufshcd_parse_regulator_info(struct ufs_hba *hba)
+{
+	int err;
+	struct device *dev = hba->dev;
+	struct ufs_vreg_info *info = &hba->vreg_info;
+
+	err = ufshcd_populate_vreg(dev, "vcc", &info->vcc);
+	if (err)
+		goto out;
+
+	err = ufshcd_populate_vreg(dev, "vccq", &info->vccq);
+	if (err)
+		goto out;
+
+	err = ufshcd_populate_vreg(dev, "vccq2", &info->vccq2);
+out:
+	return err;
+}
+
 #ifdef CONFIG_PM
 /**
  * ufshcd_pltfrm_suspend - suspend power management function
@@ -173,6 +266,13 @@ static int ufshcd_pltfrm_probe(struct platform_device *pdev)
 
 	hba->vops = get_variant_ops(&pdev->dev);
 
+	err = ufshcd_parse_regulator_info(hba);
+	if (err) {
+		dev_err(&pdev->dev, "%s: regulator init failed %d\n",
+				__func__, err);
+		goto out;
+	}
+
 	pm_runtime_set_active(&pdev->dev);
 	pm_runtime_enable(&pdev->dev);
 
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index d0565b0..ef8519e 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -68,6 +68,16 @@
 /* Interrupt aggregation default timeout, unit: 40us */
 #define INT_AGGR_DEF_TO	0x02
 
+#define ufshcd_toggle_vreg(_dev, _vreg, _on)				\
+	({                                                              \
+		int _ret;                                               \
+		if (_on)                                                \
+			_ret = ufshcd_enable_vreg(_dev, _vreg);         \
+		else                                                    \
+			_ret = ufshcd_disable_vreg(_dev, _vreg);        \
+		_ret;                                                   \
+	})
+
 enum {
 	UFSHCD_MAX_CHANNEL	= 0,
 	UFSHCD_MAX_ID		= 1,
@@ -3193,6 +3203,153 @@ static struct scsi_host_template ufshcd_driver_template = {
 	.can_queue		= UFSHCD_CAN_QUEUE,
 };
 
+static int ufshcd_config_vreg(struct device *dev,
+		struct ufs_vreg *vreg, bool on)
+{
+	int ret = 0;
+	struct regulator *reg = vreg->reg;
+	const char *name = vreg->name;
+	int min_uV, uA_load;
+
+	BUG_ON(!vreg);
+
+	if (regulator_count_voltages(reg) > 0) {
+		min_uV = on ? vreg->min_uV : 0;
+		ret = regulator_set_voltage(reg, min_uV, vreg->max_uV);
+		if (ret) {
+			dev_err(dev, "%s: %s set voltage failed, err=%d\n",
+					__func__, name, ret);
+			goto out;
+		}
+
+		uA_load = on ? vreg->max_uA : 0;
+		ret = regulator_set_optimum_mode(reg, uA_load);
+		if (ret >= 0) {
+			/*
+			 * regulator_set_optimum_mode() returns new regulator
+			 * mode upon success.
+			 */
+			ret = 0;
+		} else {
+			dev_err(dev, "%s: %s set optimum mode(uA_load=%d) failed, err=%d\n",
+					__func__, name, uA_load, ret);
+			goto out;
+		}
+	}
+out:
+	return ret;
+}
+
+static int ufshcd_enable_vreg(struct device *dev, struct ufs_vreg *vreg)
+{
+	int ret = 0;
+
+	if (!vreg || vreg->enabled)
+		goto out;
+
+	ret = ufshcd_config_vreg(dev, vreg, true);
+	if (!ret)
+		ret = regulator_enable(vreg->reg);
+
+	if (!ret)
+		vreg->enabled = true;
+	else
+		dev_err(dev, "%s: %s enable failed, err=%d\n",
+				__func__, vreg->name, ret);
+out:
+	return ret;
+}
+
+static int ufshcd_disable_vreg(struct device *dev, struct ufs_vreg *vreg)
+{
+	int ret = 0;
+
+	if (!vreg || !vreg->enabled)
+		goto out;
+
+	ret = regulator_disable(vreg->reg);
+
+	if (!ret) {
+		/* ignore errors on applying disable config */
+		ufshcd_config_vreg(dev, vreg, false);
+		vreg->enabled = false;
+	} else {
+		dev_err(dev, "%s: %s disable failed, err=%d\n",
+				__func__, vreg->name, ret);
+	}
+out:
+	return ret;
+}
+
+static int ufshcd_setup_vreg(struct ufs_hba *hba, bool on)
+{
+	int ret = 0;
+	struct device *dev = hba->dev;
+	struct ufs_vreg_info *info = &hba->vreg_info;
+
+	if (!info)
+		goto out;
+
+	ret = ufshcd_toggle_vreg(dev, info->vcc, on);
+	if (ret)
+		goto out;
+
+	ret = ufshcd_toggle_vreg(dev, info->vccq, on);
+	if (ret)
+		goto out;
+
+	ret = ufshcd_toggle_vreg(dev, info->vccq2, on);
+	if (ret)
+		goto out;
+
+out:
+	if (ret) {
+		ufshcd_toggle_vreg(dev, info->vccq2, false);
+		ufshcd_toggle_vreg(dev, info->vccq, false);
+		ufshcd_toggle_vreg(dev, info->vcc, false);
+	}
+	return ret;
+}
+
+static int ufshcd_get_vreg(struct device *dev, struct ufs_vreg *vreg)
+{
+	int ret = 0;
+
+	if (!vreg)
+		goto out;
+
+	vreg->reg = devm_regulator_get(dev, vreg->name);
+	if (IS_ERR(vreg->reg)) {
+		ret = PTR_ERR(vreg->reg);
+		dev_err(dev, "%s: %s get failed, err=%d\n",
+				__func__, vreg->name, ret);
+	}
+out:
+	return ret;
+}
+
+static int ufshcd_init_vreg(struct ufs_hba *hba)
+{
+	int ret = 0;
+	struct device *dev = hba->dev;
+	struct ufs_vreg_info *info = &hba->vreg_info;
+
+	if (!info)
+		goto out;
+
+	ret = ufshcd_get_vreg(dev, info->vcc);
+	if (ret)
+		goto out;
+
+	ret = ufshcd_get_vreg(dev, info->vccq);
+	if (ret)
+		goto out;
+
+	ret = ufshcd_get_vreg(dev, info->vccq2);
+out:
+	return ret;
+}
+
 static int ufshcd_variant_hba_init(struct ufs_hba *hba)
 {
 	int err = 0;
@@ -3248,6 +3405,36 @@ static void ufshcd_variant_hba_exit(struct ufs_hba *hba)
 		hba->vops->exit(hba);
 }
 
+static int ufshcd_hba_init(struct ufs_hba *hba)
+{
+	int err;
+
+	err = ufshcd_init_vreg(hba);
+	if (err)
+		goto out;
+
+	err = ufshcd_setup_vreg(hba, true);
+	if (err)
+		goto out;
+
+	err = ufshcd_variant_hba_init(hba);
+	if (err)
+		goto out_disable_vreg;
+
+	goto out;
+
+out_disable_vreg:
+	ufshcd_setup_vreg(hba, false);
+out:
+	return err;
+}
+
+static void ufshcd_hba_exit(struct ufs_hba *hba)
+{
+	ufshcd_variant_hba_exit(hba);
+	ufshcd_setup_vreg(hba, false);
+}
+
 /**
  * ufshcd_suspend - suspend power management function
  * @hba: per adapter instance
@@ -3333,7 +3520,7 @@ void ufshcd_remove(struct ufs_hba *hba)
 
 	scsi_host_put(hba->host);
 
-	ufshcd_variant_hba_exit(hba);
+	ufshcd_hba_exit(hba);
 }
 EXPORT_SYMBOL_GPL(ufshcd_remove);
 
@@ -3412,7 +3599,7 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
 	hba->mmio_base = mmio_base;
 	hba->irq = irq;
 
-	err = ufshcd_variant_hba_init(hba);
+	err = ufshcd_hba_init(hba);
 	if (err)
 		goto out_error;
 
@@ -3504,7 +3691,7 @@ out_remove_scsi_host:
 	scsi_remove_host(hba->host);
 out_disable:
 	scsi_host_put(host);
-	ufshcd_variant_hba_exit(hba);
+	ufshcd_hba_exit(hba);
 out_error:
 	return err;
 }
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 8c6bec0..c0232f9 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -52,6 +52,7 @@
 #include <linux/pm_runtime.h>
 #include <linux/clk.h>
 #include <linux/completion.h>
+#include <linux/regulator/consumer.h>
 
 #include <asm/irq.h>
 #include <asm/byteorder.h>
@@ -219,6 +220,7 @@ struct ufs_hba_variant_ops {
  * @saved_uic_err: sticky UIC error mask
  * @dev_cmd: ufs device management command information
  * @auto_bkops_enabled: to track whether bkops is enabled in device
+ * @vreg_info: UFS device voltage regulator information
  */
 struct ufs_hba {
 	void __iomem *mmio_base;
@@ -279,6 +281,7 @@ struct ufs_hba {
 	struct ufs_dev_cmd dev_cmd;
 
 	bool auto_bkops_enabled;
+	struct ufs_vreg_info vreg_info;
 };
 
 #define ufshcd_writel(hba, val, reg)	\
