diff mbox

[v10,08/10] arm: dts: qcom: Add idle states device nodes for 8074

Message ID 1416593037-27527-9-git-send-email-lina.iyer@linaro.org (mailing list archive)
State Superseded, archived
Headers show

Commit Message

Lina Iyer Nov. 21, 2014, 6:03 p.m. UTC 
Add ARM common idle states device bindings for cpuidle support for APQ
8074/8974.

Support Standby and Standalone power collapse (power down that does not
affect any SoC idle states) for each cpu.

Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
---
 arch/arm/boot/dts/qcom-msm8974.dtsi | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

Comments

Stephen Boyd Nov. 26, 2014, 8:15 p.m. UTC | #1 
On 11/21/2014 10:03 AM, Lina Iyer wrote:
> Add ARM common idle states device bindings for cpuidle support for APQ
> 8074/8974.
>
> Support Standby and Standalone power collapse (power down that does not
> affect any SoC idle states) for each cpu.
>
> Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
>

Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
diff mbox

Patch

diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 80a4467..e68b40f 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -22,6 +22,7 @@ 
 			next-level-cache = <&L2>;
 			qcom,acc = <&acc0>;
 			qcom,saw = <&saw0>;
+			cpu-idle-states = <&CPU_STBY &CPU_SPC>;
 		};
 
 		cpu@1 {
@@ -32,6 +33,7 @@ 
 			next-level-cache = <&L2>;
 			qcom,acc = <&acc1>;
 			qcom,saw = <&saw1>;
+			cpu-idle-states = <&CPU_STBY &CPU_SPC>;
 		};
 
 		cpu@2 {
@@ -42,6 +44,7 @@ 
 			next-level-cache = <&L2>;
 			qcom,acc = <&acc2>;
 			qcom,saw = <&saw2>;
+			cpu-idle-states = <&CPU_STBY &CPU_SPC>;
 		};
 
 		cpu@3 {
@@ -52,6 +55,7 @@ 
 			next-level-cache = <&L2>;
 			qcom,acc = <&acc3>;
 			qcom,saw = <&saw3>;
+			cpu-idle-states = <&CPU_STBY &CPU_SPC>;
 		};
 
 		L2: l2-cache {
@@ -59,6 +63,22 @@ 
 			cache-level = <2>;
 			qcom,saw = <&saw_l2>;
 		};
+
+		idle-states {
+			CPU_STBY: standby {
+				compatible = "qcom,idle-state-stby", "arm,idle-state";
+				entry-latency-us = <1>;
+				exit-latency-us = <1>;
+				min-residency-us = <2>;
+			};
+
+			CPU_SPC: spc {
+				compatible = "qcom,idle-state-spc", "arm,idle-state";
+				entry-latency-us = <150>;
+				exit-latency-us = <200>;
+				min-residency-us = <2000>;
+			};
+		};
 	};
 
 	cpu-pmu {