From patchwork Wed Jan 28 02:46:31 2015 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Bjorn Andersson X-Patchwork-Id: 5723891 Return-Path: X-Original-To: patchwork-linux-arm-msm@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork2.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.136]) by patchwork2.web.kernel.org (Postfix) with ESMTP id 3D4E6BFFA8 for ; Wed, 28 Jan 2015 02:46:53 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id 58A3320142 for ; Wed, 28 Jan 2015 02:46:52 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 4DAAD20265 for ; Wed, 28 Jan 2015 02:46:51 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1760828AbbA1Cqr (ORCPT ); Tue, 27 Jan 2015 21:46:47 -0500 Received: from seldrel01.sonyericsson.com ([212.209.106.2]:18526 "EHLO seldrel01.sonyericsson.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754542AbbA1Cqp (ORCPT ); Tue, 27 Jan 2015 21:46:45 -0500 From: Bjorn Andersson To: Liam Girdwood , Mark Brown CC: , , , , Subject: [PATCH 1/9] regulator: core: Consolidate drms update handling Date: Tue, 27 Jan 2015 18:46:31 -0800 Message-ID: <1422413199-17273-2-git-send-email-bjorn.andersson@sonymobile.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1422413199-17273-1-git-send-email-bjorn.andersson@sonymobile.com> References: <1422413199-17273-1-git-send-email-bjorn.andersson@sonymobile.com> MIME-Version: 1.0 Sender: linux-arm-msm-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org X-Spam-Status: No, score=-6.9 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_HI, T_RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=unavailable version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP Refactor drms_uA_update() slightly to allow regulator_set_optimum_mode() to utilize the same logic instead of duplicating it. Signed-off-by: Bjorn Andersson --- drivers/regulator/core.c | 112 +++++++++++++++-------------------------------- 1 file changed, 35 insertions(+), 77 deletions(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index e225711..0e0d829 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -658,23 +658,32 @@ static struct class regulator_class = { /* Calculate the new optimum regulator operating mode based on the new total * consumer load. All locks held by caller */ -static void drms_uA_update(struct regulator_dev *rdev) +static int drms_uA_update(struct regulator_dev *rdev) { struct regulator *sibling; int current_uA = 0, output_uV, input_uV, err; unsigned int mode; + /* + * first check to see if we can set modes at all, otherwise just + * tell the consumer everything is OK. + */ err = regulator_check_drms(rdev); - if (err < 0 || !rdev->desc->ops->get_optimum_mode || - (!rdev->desc->ops->get_voltage && - !rdev->desc->ops->get_voltage_sel) || - !rdev->desc->ops->set_mode) - return; + if (err < 0) + return 0; + + if (!rdev->desc->ops->get_optimum_mode) + return 0; + + if (!rdev->desc->ops->set_mode) + return -EINVAL; /* get output voltage */ output_uV = _regulator_get_voltage(rdev); - if (output_uV <= 0) - return; + if (output_uV <= 0) { + rdev_err(rdev, "invalid output voltage found\n"); + return -EINVAL; + } /* get input voltage */ input_uV = 0; @@ -682,8 +691,10 @@ static void drms_uA_update(struct regulator_dev *rdev) input_uV = regulator_get_voltage(rdev->supply); if (input_uV <= 0) input_uV = rdev->constraints->input_uV; - if (input_uV <= 0) - return; + if (input_uV <= 0) { + rdev_err(rdev, "invalid input voltage found\n"); + return -EINVAL; + } /* calc total requested load */ list_for_each_entry(sibling, &rdev->consumer_list, list) @@ -695,8 +706,17 @@ static void drms_uA_update(struct regulator_dev *rdev) /* check the new mode is allowed */ err = regulator_mode_constrain(rdev, &mode); - if (err == 0) - rdev->desc->ops->set_mode(rdev, mode); + if (err < 0) { + rdev_err(rdev, "failed to get optimum mode @ %d uA %d -> %d uV\n", + current_uA, input_uV, output_uV); + return err; + } + + err = rdev->desc->ops->set_mode(rdev, mode); + if (err < 0) + rdev_err(rdev, "failed to set optimum mode %x\n", mode); + + return err; } static int suspend_set_state(struct regulator_dev *rdev, @@ -3024,75 +3044,13 @@ EXPORT_SYMBOL_GPL(regulator_get_mode); int regulator_set_optimum_mode(struct regulator *regulator, int uA_load) { struct regulator_dev *rdev = regulator->rdev; - struct regulator *consumer; - int ret, output_uV, input_uV = 0, total_uA_load = 0; - unsigned int mode; - - if (rdev->supply) - input_uV = regulator_get_voltage(rdev->supply); + int ret; mutex_lock(&rdev->mutex); - - /* - * first check to see if we can set modes at all, otherwise just - * tell the consumer everything is OK. - */ regulator->uA_load = uA_load; - ret = regulator_check_drms(rdev); - if (ret < 0) { - ret = 0; - goto out; - } - - if (!rdev->desc->ops->get_optimum_mode) - goto out; - - /* - * we can actually do this so any errors are indicators of - * potential real failure. - */ - ret = -EINVAL; - - if (!rdev->desc->ops->set_mode) - goto out; - - /* get output voltage */ - output_uV = _regulator_get_voltage(rdev); - if (output_uV <= 0) { - rdev_err(rdev, "invalid output voltage found\n"); - goto out; - } - - /* No supply? Use constraint voltage */ - if (input_uV <= 0) - input_uV = rdev->constraints->input_uV; - if (input_uV <= 0) { - rdev_err(rdev, "invalid input voltage found\n"); - goto out; - } - - /* calc total requested load for this regulator */ - list_for_each_entry(consumer, &rdev->consumer_list, list) - total_uA_load += consumer->uA_load; - - mode = rdev->desc->ops->get_optimum_mode(rdev, - input_uV, output_uV, - total_uA_load); - ret = regulator_mode_constrain(rdev, &mode); - if (ret < 0) { - rdev_err(rdev, "failed to get optimum mode @ %d uA %d -> %d uV\n", - total_uA_load, input_uV, output_uV); - goto out; - } - - ret = rdev->desc->ops->set_mode(rdev, mode); - if (ret < 0) { - rdev_err(rdev, "failed to set optimum mode %x\n", mode); - goto out; - } - ret = mode; -out: + ret = drms_uA_update(rdev); mutex_unlock(&rdev->mutex); + return ret; } EXPORT_SYMBOL_GPL(regulator_set_optimum_mode);