diff mbox

arm: dts: qcom: Add LCC nodes

Message ID 1422480972-4105-1-git-send-email-sboyd@codeaurora.org (mailing list archive)
State Accepted, archived
Headers show

Commit Message

Stephen Boyd Jan. 28, 2015, 9:36 p.m. UTC 
From: Kumar Gala <galak@codeaurora.org>

Add the node for the LPASS clock controller found on a few qcom
SoCs so that the clock driver can probe.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
[sboyd@codeaurora.org: Added apq8064 and msm8960 nodes]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 arch/arm/boot/dts/qcom-apq8064.dtsi | 7 +++++++
 arch/arm/boot/dts/qcom-ipq8064.dtsi | 8 ++++++++
 arch/arm/boot/dts/qcom-msm8960.dtsi | 7 +++++++
 3 files changed, 22 insertions(+)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index b3154c071652..7705752c212c 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -239,6 +239,13 @@ 
 			#reset-cells = <1>;
 		};
 
+		lcc: clock-controller@28000000 {
+			compatible = "qcom,lcc-apq8064";
+			reg = <0x28000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
 		mmcc: clock-controller@4000000 {
 			compatible = "qcom,mmcc-apq8064";
 			reg = <0x4000000 0x1000>;
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index cb225dafe97c..568260c387bb 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -279,5 +279,13 @@ 
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 		};
+
+		lcc: clock-controller@28000000 {
+			compatible = "qcom,lcc-ipq8064";
+			reg = <0x28000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
 	};
 };
diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi
index e1b0d5cd9e3c..41ac308d4d68 100644
--- a/arch/arm/boot/dts/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
@@ -91,6 +91,13 @@ 
 			reg = <0x900000 0x4000>;
 		};
 
+		lcc: clock-controller@28000000 {
+			compatible = "qcom,lcc-msm8960";
+			reg = <0x28000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
 		clock-controller@4000000 {
 			compatible = "qcom,mmcc-msm8960";
 			reg = <0x4000000 0x1000>;