| Message ID | 1424678144-13224-1-git-send-email-srinivas.kandagatla@linaro.org (mailing list archive) |
|---|---|
| State | Changes Requested |
| Headers | show |
On 02/23/15 09:55, Srinivas Kandagatla wrote: > From: Nicolas Dechesne <nicolas.dechesne@linaro.org> > > This patch adds device tree nodes to support two usb hosts on Compulab QS600 board. > > Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org> Acked-by: Igor Grinberg <grinberg@compulab.co.il> > --- > arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 16 ++++++++++++++++ > 1 file changed, 16 insertions(+) > > diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts > index 6e62f24..af2e075 100644 > --- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts > +++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts > @@ -41,6 +41,22 @@ > }; > }; > > + usb3_phy:phy@12520000 { > + status = "ok"; > + }; > + > + usb4_phy:phy@12530000 { > + status = "ok"; > + }; > + > + usb3: usb@12520000 { > + status = "ok"; > + }; > + > + usb4: usb@12530000 { > + status = "ok"; > + }; > + > /* on board fixed 3.3v supply */ > v3p3_pcieclk: v3p3-pcieclk { > compatible = "regulator-fixed"; >
diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts index 6e62f24..af2e075 100644 --- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts +++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts @@ -41,6 +41,22 @@ }; }; + usb3_phy:phy@12520000 { + status = "ok"; + }; + + usb4_phy:phy@12530000 { + status = "ok"; + }; + + usb3: usb@12520000 { + status = "ok"; + }; + + usb4: usb@12530000 { + status = "ok"; + }; + /* on board fixed 3.3v supply */ v3p3_pcieclk: v3p3-pcieclk { compatible = "regulator-fixed";