diff mbox

[11/12] ARM: dts: Move i2c1 pinctrl to apq8064.dtsi

Message ID 1424678177-13392-1-git-send-email-srinivas.kandagatla@linaro.org (mailing list archive)
State Changes Requested
Headers show

Commit Message

Srinivas Kandagatla Feb. 23, 2015, 7:56 a.m. UTC
I2C1 pinctrl is not really specific to a board, moving to SOC dtsi would
avoid redefining this in every board.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 7 -------
 arch/arm/boot/dts/qcom-apq8064.dtsi        | 7 +++++++
 2 files changed, 7 insertions(+), 7 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index 7a6a076..ab7aee2 100644
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -11,13 +11,6 @@ 
 
 	soc {
 		pinctrl@800000 {
-			i2c1_pins: i2c1 {
-				mux {
-					pins = "gpio20", "gpio21";
-					function = "gsbi1";
-				};
-			};
-
 			card_detect: card_detect {
 				mux {
 					pins = "gpio26";
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index ba44f30..09077a0 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -115,6 +115,13 @@ 
 					function = "ps_hold";
 				};
 			};
+
+			i2c1_pins: i2c1 {
+				mux {
+					pins = "gpio20", "gpio21";
+					function = "gsbi1";
+				};
+			};
 		};
 
 		intc: interrupt-controller@2000000 {