@@ -31,6 +31,11 @@ const struct mdp5_cfg_hw msm8x74_config = {
.smp = {
.mmb_count = 22,
.mmb_size = 4096,
+ .clients = {
+ [SSPP_VIG0] = 1, [SSPP_VIG1] = 4, [SSPP_VIG2] = 7,
+ [SSPP_DMA0] = 10, [SSPP_DMA1] = 13,
+ [SSPP_RGB0] = 16, [SSPP_RGB1] = 17, [SSPP_RGB2] = 18,
+ },
},
.ctl = {
.count = 5,
@@ -86,11 +91,18 @@ const struct mdp5_cfg_hw apq8084_config = {
.smp = {
.mmb_count = 44,
.mmb_size = 8192,
+ .clients = {
+ [SSPP_VIG0] = 1, [SSPP_VIG1] = 4,
+ [SSPP_VIG2] = 7, [SSPP_VIG3] = 19,
+ [SSPP_DMA0] = 10, [SSPP_DMA1] = 13,
+ [SSPP_RGB0] = 16, [SSPP_RGB1] = 17,
+ [SSPP_RGB2] = 18, [SSPP_RGB3] = 22,
+ },
.reserved_state[0] = GENMASK(7, 0), /* first 8 MMBs */
- .reserved[CID_RGB0] = 2,
- .reserved[CID_RGB1] = 2,
- .reserved[CID_RGB2] = 2,
- .reserved[CID_RGB3] = 2,
+ .reserved = {
+ /* Two SMP blocks are statically tied to RGB pipes: */
+ [16] = 2, [17] = 2, [18] = 2, [22] = 2,
+ },
},
.ctl = {
.count = 5,
@@ -52,6 +52,7 @@ struct mdp5_ctl_block {
struct mdp5_smp_block {
int mmb_count; /* number of SMP MMBs */
int mmb_size; /* MMB: size in bytes */
+ uint32_t clients[MAX_CLIENTS]; /* SMP port allocation /pipe */
mdp5_smp_state_t reserved_state;/* SMP MMBs statically allocated */
int reserved[MAX_CLIENTS]; /* # of MMBs allocated per client */
};
@@ -74,7 +74,7 @@ struct mdp5_smp {
spinlock_t state_lock;
mdp5_smp_state_t state; /* to track smp allocation amongst pipes: */
- struct mdp5_client_smp_state client_state[CID_MAX];
+ struct mdp5_client_smp_state client_state[MAX_CLIENTS];
};
static inline
@@ -85,27 +85,31 @@ struct mdp5_kms *get_kms(struct mdp5_smp *smp)
return to_mdp5_kms(to_mdp_kms(priv->kms));
}
-static inline enum mdp5_client_id pipe2client(enum mdp5_pipe pipe, int plane)
+static inline u32 pipe2client(enum mdp5_pipe pipe, int plane)
{
- WARN_ON(plane >= pipe2nclients(pipe));
- switch (pipe) {
- case SSPP_VIG0: return CID_VIG0_Y + plane;
- case SSPP_VIG1: return CID_VIG1_Y + plane;
- case SSPP_VIG2: return CID_VIG2_Y + plane;
- case SSPP_RGB0: return CID_RGB0;
- case SSPP_RGB1: return CID_RGB1;
- case SSPP_RGB2: return CID_RGB2;
- case SSPP_DMA0: return CID_DMA0_Y + plane;
- case SSPP_DMA1: return CID_DMA1_Y + plane;
- case SSPP_VIG3: return CID_VIG3_Y + plane;
- case SSPP_RGB3: return CID_RGB3;
- default: return CID_UNUSED;
- }
+#define CID_UNUSED 0
+
+ if (WARN_ON(plane >= pipe2nclients(pipe)))
+ return CID_UNUSED;
+
+ /*
+ * Note on SMP clients:
+ * For ViG pipes, fetch Y/Cr/Cb-components clients are always
+ * consecutive, and in that order.
+ *
+ * e.g.:
+ * if mdp5_cfg->smp.clients[SSPP_VIG0] = N,
+ * Y plane's client ID is N
+ * Cr plane's client ID is N + 1
+ * Cb plane's client ID is N + 2
+ */
+
+ return mdp5_cfg->smp.clients[pipe] + plane;
}
/* step #1: update # of blocks pending for the client: */
static int smp_request_block(struct mdp5_smp *smp,
- enum mdp5_client_id cid, int nblks)
+ u32 cid, int nblks)
{
struct mdp5_kms *mdp5_kms = get_kms(smp);
const struct mdp5_cfg_hw *hw_cfg;
@@ -227,7 +231,7 @@ void mdp5_smp_release(struct mdp5_smp *smp, enum mdp5_pipe pipe)
}
static void update_smp_state(struct mdp5_smp *smp,
- enum mdp5_client_id cid, mdp5_smp_state_t *assigned)
+ u32 cid, mdp5_smp_state_t *assigned)
{
struct mdp5_kms *mdp5_kms = get_kms(smp);
int cnt = smp->blk_cnt;
@@ -267,7 +271,7 @@ void mdp5_smp_configure(struct mdp5_smp *smp, enum mdp5_pipe pipe)
int i;
for (i = 0; i < pipe2nclients(pipe); i++) {
- enum mdp5_client_id cid = pipe2client(pipe, i);
+ u32 cid = pipe2client(pipe, i);
struct mdp5_client_smp_state *ps = &smp->client_state[cid];
bitmap_or(assigned, ps->inuse, ps->pending, cnt);
@@ -283,7 +287,7 @@ void mdp5_smp_commit(struct mdp5_smp *smp, enum mdp5_pipe pipe)
int i;
for (i = 0; i < pipe2nclients(pipe); i++) {
- enum mdp5_client_id cid = pipe2client(pipe, i);
+ u32 cid = pipe2client(pipe, i);
struct mdp5_client_smp_state *ps = &smp->client_state[cid];
/*
SMP blocks are configured for specific client IDs (ports). These client IDs can be different from one chip to another for a given pipe. e.g.: DMA0 pipe fetch Y component is connected to: - port #10 for MDP5 v1.3 - port #4 for MDP5 v1.6 In order to be compatible for upcoming versions of MDP5, the client ID list is passed through the MDP5 config module rather than using a list of hard-coded enum values. Signed-off-by: Stephane Viau <sviau@codeaurora.org> --- drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c | 20 ++++++++++++--- drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.h | 1 + drivers/gpu/drm/msm/mdp/mdp5/mdp5_smp.c | 44 ++++++++++++++++++--------------- 3 files changed, 41 insertions(+), 24 deletions(-)