diff mbox

mfd: qcom-rpm: Add apq8064 QDSS clock resource

Message ID 1431959738-32220-1-git-send-email-ivan.ivanov@linaro.org (mailing list archive)
State Not Applicable, archived
Delegated to: Andy Gross
Headers show

Commit Message

Ivan T. Ivanov May 18, 2015, 2:35 p.m. UTC
Qualcomm Debug Subsystem clock is used by CoreSight components.
Add required definitions for it.

Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org>
---
 drivers/mfd/qcom_rpm.c | 1 +
 1 file changed, 1 insertion(+)

--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Ivan Ivanov July 6, 2015, 1:17 p.m. UTC | #1
On Mon, 2015-05-18 at 17:35 +0300, Ivan T. Ivanov wrote:
> Qualcomm Debug Subsystem clock is used by CoreSight components.
> Add required definitions for it.
> 
> Signed-off-by: Ivan T. Ivanov ivanov@linaro.org>
> ---
>  drivers/mfd/qcom_rpm.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/mfd/qcom_rpm.c b/drivers/mfd/qcom_rpm.c
> index eceb34f..313aeae 100644
> --- a/drivers/mfd/qcom_rpm.c
> +++ b/drivers/mfd/qcom_rpm.c
> @@ -149,6 +149,7 @@ static const struct qcom_rpm_resource apq8064_rpm_resource_table[] = {
>         [QCOM_RPM_USB_OTG_SWITCH] ={ 210, 125, 82, 1 },
>         [QCOM_RPM_HDMI_SWITCH] ={ 211, 126, 83, 1 },
>         [QCOM_RPM_DDR_DMM] ={ 212, 127, 84, 2 },
> +       [QCOM_RPM_QDSS_CLK] ={ 214, 129, 7, 1 },
>         [QCOM_RPM_VDDMIN_GPIO] ={ 215, 131, 89, 1 },
>  };

Hi Bjorn, 

Could you take a look at this one?

Thanks,
Ivan
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Bjorn Andersson July 6, 2015, 8:33 p.m. UTC | #2
On Mon 18 May 07:35 PDT 2015, Ivan T. Ivanov wrote:

> Qualcomm Debug Subsystem clock is used by CoreSight components.
> Add required definitions for it.
> 
> Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org>

Sorry for the slow response Ivan.

> ---
>  drivers/mfd/qcom_rpm.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/mfd/qcom_rpm.c b/drivers/mfd/qcom_rpm.c
> index eceb34f..313aeae 100644
> --- a/drivers/mfd/qcom_rpm.c
> +++ b/drivers/mfd/qcom_rpm.c
> @@ -149,6 +149,7 @@ static const struct qcom_rpm_resource apq8064_rpm_resource_table[] = {
>  	[QCOM_RPM_USB_OTG_SWITCH] =		{ 210, 125, 82, 1 },
>  	[QCOM_RPM_HDMI_SWITCH] =		{ 211, 126, 83, 1 },
>  	[QCOM_RPM_DDR_DMM] =			{ 212, 127, 84, 2 },
> +	[QCOM_RPM_QDSS_CLK] =			{ 214, 129, 7, 1 },

214, 7 and 1 are correct. But as far as I can see in my tables the QDSS
clock doesn't have any status (129 seems to be EBI1_CH0_RANGE).

The status_id was originally included because I was reading it and I saw
that Srinivas has some code that reads it, but unless it shows to be
useful we should probably just drop that entire column...

But for now please mark it as -1 or so and we can have a chat with
Srinivas on dropping the column later.

>  	[QCOM_RPM_VDDMIN_GPIO] =		{ 215, 131, 89, 1 },
>  };
> 

Regards,
Bjorn
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Ivan T. Ivanov July 7, 2015, 7:06 a.m. UTC | #3
On Mon, 2015-07-06 at 13:33 -0700, Bjorn Andersson wrote:
> On Mon 18 May 07:35 PDT 2015, Ivan T. Ivanov wrote:
> 
> > Qualcomm Debug Subsystem clock is used by CoreSight components.
> > Add required definitions for it.
> > 
> > Signed-off-by: Ivan T. Ivanov ivanov@linaro.org>
> 
> Sorry for the slow response Ivan.
> 
> > ---
> >  drivers/mfd/qcom_rpm.c | 1 +
> >  1 file changed, 1 insertion(+)
> > 
> > diff --git a/drivers/mfd/qcom_rpm.c b/drivers/mfd/qcom_rpm.c
> > index eceb34f..313aeae 100644
> > --- a/drivers/mfd/qcom_rpm.c
> > +++ b/drivers/mfd/qcom_rpm.c
> > @@ -149,6 +149,7 @@ static const struct qcom_rpm_resource apq8064_rpm_resource_table[] = {
> >         [QCOM_RPM_USB_OTG_SWITCH] ={ 210, 125, 82, 1 },
> >         [QCOM_RPM_HDMI_SWITCH] ={ 211, 126, 83, 1 },
> >         [QCOM_RPM_DDR_DMM] ={ 212, 127, 84, 2 },
> > +       [QCOM_RPM_QDSS_CLK] ={ 214, 129, 7, 1 },
> 
> 214, 7 and 1 are correct. But as far as I can see in my tables the QDSS
> clock doesn't have any status (129 seems to be EBI1_CH0_RANGE).
> 
> The status_id was originally included because I was reading it and I saw
> that Srinivas has some code that reads it, but unless it shows to be
> useful we should probably just drop that entire column...
> 
> But for now please mark it as -1 or so and we can have a chat with
> Srinivas on dropping the column later.

Thanks, I was unsure about this. This is just what I have found 
digging into codeaurora sources. Will change and resubmit.

Ivan

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/mfd/qcom_rpm.c b/drivers/mfd/qcom_rpm.c
index eceb34f..313aeae 100644
--- a/drivers/mfd/qcom_rpm.c
+++ b/drivers/mfd/qcom_rpm.c
@@ -149,6 +149,7 @@  static const struct qcom_rpm_resource apq8064_rpm_resource_table[] = {
 	[QCOM_RPM_USB_OTG_SWITCH] =		{ 210, 125, 82, 1 },
 	[QCOM_RPM_HDMI_SWITCH] =		{ 211, 126, 83, 1 },
 	[QCOM_RPM_DDR_DMM] =			{ 212, 127, 84, 2 },
+	[QCOM_RPM_QDSS_CLK] =			{ 214, 129, 7, 1 },
 	[QCOM_RPM_VDDMIN_GPIO] =		{ 215, 131, 89, 1 },
 };