@@ -268,6 +268,45 @@
status = "disabled";
};
+ usb_dev: usb@78d9000 {
+ compatible = "qcom,ci-hdrc";
+ reg = <0x78d9000 0x400>;
+ dr_mode = "peripheral";
+ interrupts = <GIC_SPI 134 IRQ_TYPE_NONE>;
+ usb-phy = <&usb_otg>;
+ status = "disabled";
+ };
+
+ usb_host: ehci@78d9000 {
+ compatible = "qcom,ehci-host";
+ reg = <0x78d9000 0x400>;
+ interrupts = <GIC_SPI 134 IRQ_TYPE_NONE>;
+ usb-phy = <&usb_otg>;
+ status = "disabled";
+ };
+
+ usb_otg: phy@78d9000 {
+ compatible = "qcom,usb-otg-snps";
+ reg = <0x78d9000 0x400>;
+ interrupts = <GIC_SPI 134 IRQ_TYPE_EDGE_BOTH>,
+ <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,vdd-levels = <1 5 7>;
+ qcom,phy-init-sequence = <0x44 0x6B 0x24 0x13>;
+ dr_mode = "peripheral";
+ qcom,otg-control = <2>; // PMIC
+
+ clocks = <&gcc GCC_USB_HS_AHB_CLK>,
+ <&gcc GCC_USB_HS_SYSTEM_CLK>,
+ <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+ clock-names = "iface", "core", "sleep";
+
+ resets = <&gcc GCC_USB2A_PHY_BCR>,
+ <&gcc GCC_USB_HS_BCR>;
+ reset-names = "phy", "link";
+ status = "disabled";
+ };
+
intc: interrupt-controller@b000000 {
compatible = "qcom,msm-qgic2";
interrupt-controller;
Add Host, Device and OTG configuration nodes. Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org> --- arch/arm64/boot/dts/qcom/msm8916.dtsi | 39 +++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html