@@ -54,3 +54,17 @@ config DRM_MSM_DSI_PLL
help
Choose this option to enable DSI PLL driver which provides DSI
source clocks under common clock framework.
+
+config DRM_MSM_DSI_28NM_PHY
+ bool "Enable DSI 28nm PHY driver in MSM DRM"
+ depends on DRM_MSM_DSI
+ default y
+ help
+ Choose this option if the 28nm DSI PHY is used on the platform.
+
+config DRM_MSM_DSI_20NM_PHY
+ bool "Enable DSI 20nm PHY driver in MSM DRM"
+ depends on DRM_MSM_DSI
+ default y
+ help
+ Choose this option if the 20nm DSI PHY is used on the platform.
@@ -57,11 +57,14 @@ msm-$(CONFIG_DRM_MSM_DSI) += dsi/dsi.o \
dsi/dsi_host.o \
dsi/dsi_manager.o \
dsi/phy/dsi_phy.o \
- dsi/phy/dsi_phy_20nm.o \
- dsi/phy/dsi_phy_28nm.o \
mdp/mdp5/mdp5_cmd_encoder.o
-msm-$(CONFIG_DRM_MSM_DSI_PLL) += dsi/pll/dsi_pll.o \
- dsi/pll/dsi_pll_28nm.o
+msm-$(CONFIG_DRM_MSM_DSI_28NM_PHY) += dsi/phy/dsi_phy_28nm.o
+msm-$(CONFIG_DRM_MSM_DSI_20NM_PHY) += dsi/phy/dsi_phy_20nm.o
+
+ifeq ($(CONFIG_DRM_MSM_DSI_PLL),y)
+msm-y += dsi/pll/dsi_pll.o
+msm-$(CONFIG_DRM_MSM_DSI_28NM_PHY) += dsi/pll/dsi_pll_28nm.o
+endif
obj-$(CONFIG_DRM_MSM) += msm.o
@@ -267,12 +267,16 @@ static void dsi_phy_disable_resource(struct msm_dsi_phy *phy)
}
static const struct of_device_id dsi_phy_dt_match[] = {
+#ifdef CONFIG_DRM_MSM_DSI_28NM_PHY
{ .compatible = "qcom,dsi-phy-28nm-hpm",
.data = &dsi_phy_28nm_hpm_cfgs },
{ .compatible = "qcom,dsi-phy-28nm-lp",
.data = &dsi_phy_28nm_lp_cfgs },
+#endif
+#ifdef CONFIG_DRM_MSM_DSI_20NM_PHY
{ .compatible = "qcom,dsi-phy-20nm",
.data = &dsi_phy_20nm_cfgs },
+#endif
{}
};
@@ -83,8 +83,16 @@ void msm_dsi_pll_helper_unregister_clks(struct platform_device *pdev,
/*
* Initialization for Each PLL Type
*/
+#ifdef CONFIG_DRM_MSM_DSI_28NM_PHY
struct msm_dsi_pll *msm_dsi_pll_28nm_init(struct platform_device *pdev,
enum msm_dsi_phy_type type, int id);
+#else
+static inline struct msm_dsi_pll *msm_dsi_pll_28nm_init(
+ struct platform_device *pdev, enum msm_dsi_phy_type type, int id)
+{
+ return ERR_PTR(-ENODEV);
+}
+#endif
#endif /* __DSI_PLL_H__ */
On a certain platform, only one type of DSI PHY is used. This change allows the user to only compile the PHY type which is being used. Signed-off-by: Hai Li <hali@codeaurora.org> --- drivers/gpu/drm/msm/Kconfig | 14 ++++++++++++++ drivers/gpu/drm/msm/Makefile | 11 +++++++---- drivers/gpu/drm/msm/dsi/phy/dsi_phy.c | 4 ++++ drivers/gpu/drm/msm/dsi/pll/dsi_pll.h | 8 ++++++++ 4 files changed, 33 insertions(+), 4 deletions(-)