@@ -880,6 +880,7 @@ msm_find_best_baud(struct uart_port *port, unsigned int baud)
{ 3, 0xdd, 8 },
{ 2, 0xee, 16 },
{ 1, 0xff, 31 },
+ { 0, 0xff, 31 },
};
divisor = uart_get_divisor(port, baud);
@@ -891,16 +892,29 @@ msm_find_best_baud(struct uart_port *port, unsigned int baud)
return entry; /* Default to smallest divider */
}
-static int msm_set_baud_rate(struct uart_port *port, unsigned int baud)
+static int msm_set_baud_rate(struct uart_port *port, unsigned int baud,
+ unsigned long *saved_flags)
{
unsigned int rxstale, watermark, mask;
struct msm_port *msm_port = UART_TO_MSM(port);
const struct msm_baud_map *entry;
+ unsigned long flags;
entry = msm_find_best_baud(port, baud);
msm_write(port, entry->code, UART_CSR);
+ if (baud > 460800)
+ port->uartclk = baud * 16;
+
+ flags = *saved_flags;
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ clk_set_rate(msm_port->clk, port->uartclk);
+
+ spin_lock_irqsave(&port->lock, flags);
+ *saved_flags = flags;
+
/* RX stale watermark */
rxstale = entry->rxstale;
watermark = UART_IPR_STALE_LSB & rxstale;
@@ -1024,8 +1038,8 @@ static void msm_set_termios(struct uart_port *port, struct ktermios *termios,
msm_stop_dma(port, dma);
/* calculate and set baud rate */
- baud = uart_get_baud_rate(port, termios, old, 300, 115200);
- baud = msm_set_baud_rate(port, baud);
+ baud = uart_get_baud_rate(port, termios, old, 300, 4000000);
+ baud = msm_set_baud_rate(port, baud, &flags);
if (tty_termios_baud_rate(termios))
tty_termios_encode_baud_rate(termios, baud, baud);
UART controller is capable to perform transfers up to 4 Mbps. Remove artificial 115.2 Kbps limitation. Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org> --- drivers/tty/serial/msm_serial.c | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html